[hylafax-users] [Fwd: Re: Caught signal 11 - Solved]

[Bob von Knobloch <bob@xxxxxxxxxxxx>]

I have the same problem,  never got a good answer or a solution. I'm 
using Fedora Core 2 with Hylafax -4.2.0-1rhp (installed from RPM). I 
didn't think about trying an older version.

Robert von Knobloch

-------- Original-Nachricht --------
Betreff: 	Re: [hylafax-users] Caught signal 11 - Solved
Datum: 	Tue, 30 Nov 2004 05:50:24 -0800 (PST)
Von: 	P <procadas@xxxxxxxxx>
An: 	hylafax-users@xxxxxxxxxxx



It's a bit difficult to avaliate what could be wrong.
Which distro are you using? Maybe something related
with the libraries?

--- Gerry Doris <gdoris@xxxxxxxxxx> wrote:

> On Mon, 29 Nov 2004, Gerry Doris wrote:
>
> > I have been having all kinds of grief trying to be
> able to connect to 
> > Hylafax (see other posts).  
> > 
> > I first thought it was a problem with Whfc but
> then released that I can't
> > even telnet to the server and log in using the
> user command.  I then 
> > thought it was a problem with the hosts.hfaxd file
> (ownership/permissions) 
> > but that isn't the case.
> > 
> > Now when I telnet into the server (from the
> server) and try and login 
> > using the user command I get
> > 
> > 230 USER gerry logged in
> > 
> > immediately followed by 
> > 
> > Connection closed by foreign host
> > 
> > What I have also found is that in my log files I'm
> seeing is 
> > 
> > HylaFAX: CAUGHT SIGNAL 11
> > 
> > for every attempt.  Checking the archives I
> noticed that this is really a 
> > segmentation fault and often the result of a
> hardware failure.  This 
> > server runs 7x24 for weeks at a time and I have
> never seen a CAUGHT SIGNAL 
> > 11 or segmentation fault on it with any other
> program.  I really doubt 
> > it's a hardware fault.
> > 
> > I've uninstalled hylafax a couple of times now but
> get the same result.  
> > Unless someone has any other suggestions I'm going
> to try going back to 
> > the last version (4.19?).  Everything was working
> fine on it.
> > 
> > BTW, the hylafax server receives faxes perfectly. 
> I just can login to 
> > view or send.
>
> I hate to reply to my own email but I have fixed the
> problems I've been 
> having with Hylafax by removing version 4.2.0 and
> going back to 4.1.8.  
>
> I've tried installing/deinstall 4.2.0 but it just
> will not work on my 
> server.  It always has a CAUGHT SIGNAL 11 message
> and crashes.  4.1.8 
> works perfectly.
>
> I have absolutely no idea why this is happening???
>
> --
> Gerry
>
> "The lyfe so short, the craft so long to learne" 
> Chaucer
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*