|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Missing pages
Class 1 or 2?
--- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote:
> Originally I had it set to xonxoff (by default) but
> I changed it to
> rtscts trying to trouble shoot and I get the same
> results. I am not
> entirely versed on what my options are when dealing
> with flow
> control...as a hint I am using a Zoom 1144L external
> serial modem, if
> that is worth anything.
>
> Pedro Rocadas wrote:
>
> >Which flow control is set in the config file?
> >
> >--- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote:
> >
> >
> >
> >>I am using libtiff-3.5.7
> >>
> >>Thanks
> >>
> >>Pedro Rocadas wrote:
> >>
> >>
> >>
> >>>Which libtiff are you using?
> >>>
> >>>--- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote:
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>I have been frequently getting faxes that do not
> >>>>have all of their
> >>>>pages, I have been fighting with this for a
> while
> >>>>and think I have
> >>>>finnaly established what the problem may be.
> The
> >>>>attached is a log for
> >>>>a 19 page fax and only 2 pages were recieved. I
> >>>>also get faxes that can
> >>>>not be read on occasion but I am more concerned
> >>>>
> >>>>
> >>with
> >>
> >>
> >>>>this. I have
> >>>>noticed in my /var/log/messages that it does
> >>>>
> >>>>
> >>recieve
> >>
> >>
> >>>>all pages and I
> >>>>have pasted that log as well. It looks like
> they
> >>>>are being recieved but
> >>>>not saved correctly, however the next fax has 8
> >>>>pages and comes through
> >>>>perfectly. I am at a loss on ideas.
> >>>>
> >>>>Here is the log from the fax:
> >>>>
> >>>>Nov 05 08:13:48.63: [27436]: SESSION BEGIN
> >>>>
> >>>>
> >>000000118
> >>
> >>
> >>>>15137927922
> >>>>Nov 05 08:13:48.63: [27436]: HylaFAX (tm)
> Version
> >>>>4.2.0
> >>>>Nov 05 08:13:48.63: [27436]: <-- [4:ATA\r]
> >>>>Nov 05 08:13:54.99: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:13:54.99: [27436]: ANSWER: FAX
> >>>>
> >>>>
> >>CONNECTION
> >>
> >>
> >>>>DEVICE '/dev/ttyS0'
> >>>>Nov 05 08:13:54.99: [27436]: RECV FAX: begin
> >>>>Nov 05 08:13:55.00: [27436]: <-- data [32]
> >>>>Nov 05 08:13:55.00: [27436]: <-- data [2]
> >>>>Nov 05 08:13:55.03: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:13:55.03: [27436]: <-- data [23]
> >>>>Nov 05 08:13:55.03: [27436]: <-- data [2]
> >>>>Nov 05 08:13:55.05: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:13:55.05: [27436]: <-- data [10]
> >>>>Nov 05 08:13:55.05: [27436]: <-- data [2]
> >>>>Nov 05 08:13:57.19: [27436]: --> [2:OK]
> >>>>Nov 05 08:13:57.19: [27436]: <-- [9:AT+FRH=3\r]
> >>>>Nov 05 08:13:57.29: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:13:58.98: [27436]: --> [2:OK]
> >>>>Nov 05 08:13:58.98: [27436]: REMOTE TSI
> >>>>
> >>>>
> >>"5137719528"
> >>
> >>
> >>>>Nov 05 08:13:58.98: [27436]: <-- [9:AT+FRH=3\r]
> >>>>Nov 05 08:13:58.99: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:13:59.24: [27436]: --> [2:OK]
> >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 9600
> >>>>
> >>>>
> >>bit/s
> >>
> >>
> >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants A4
> page
> >>>>width (215 mm)
> >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants
> >>>>
> >>>>
> >>unlimited
> >>
> >>
> >>>>page length
> >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 3.85
> >>>>line/mm
> >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 2-D
> MMR
> >>>>Nov 05 08:13:59.25: [27436]: REMOTE wants T.30
> >>>>
> >>>>
> >>Annex
> >>
> >>
> >>>>A, 256-byte ECM
> >>>>Nov 05 08:13:59.25: [27436]: RECV training at
> v.29
> >>>>9600 bit/s
> >>>>Nov 05 08:13:59.25: [27436]: <--
> [10:AT+FRM=96\r]
> >>>>Nov 05 08:13:59.59: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:14:01.09: [27436]: RECV: TCF 1808
> bytes,
> >>>>0% non-zero, 1802
> >>>>zero-run
> >>>>Nov 05 08:14:01.10: [27436]: --> [10:NO CARRIER]
> >>>>Nov 05 08:14:01.10: [27436]: DELAY 75 ms
> >>>>Nov 05 08:14:01.18: [27436]: TRAINING succeeded
> >>>>Nov 05 08:14:01.18: [27436]: <-- [9:AT+FTH=3\r]
> >>>>Nov 05 08:14:02.04: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:14:02.04: [27436]: <-- data [3]
> >>>>Nov 05 08:14:02.04: [27436]: <-- data [2]
> >>>>Nov 05 08:14:02.36: [27436]: --> [2:OK]
> >>>>Nov 05 08:14:02.36: [27436]: <--
> [10:AT+FRM=96\r]
> >>>>Nov 05 08:14:03.22: [27436]: --> [7:CONNECT]
> >>>>Nov 05 08:14:04.92: [27436]: RECV received frame
> >>>>number 0
> >>>>Nov 05 08:14:05.14: [27436]: RECV received frame
> >>>>number 1
> >>>>Nov 05 08:14:05.35: [27436]: RECV received frame
> >>>>number 2
> >>>>Nov 05 08:14:05.56: [27436]: RECV received frame
> >>>>number 3
> >>>>Nov 05 08:14:05.78: [27436]: RECV received frame
> >>>>number 4
> >>>>Nov 05 08:14:06.10: [27436]: RECV received frame
> >>>>number 5
> >>>>Nov 05 08:14:06.31: [27436]: RECV received frame
> >>>>number 6
> >>>>Nov 05 08:14:06.52: [27436]: RECV received frame
> >>>>number 7
> >>>>Nov 05 08:14:06.74: [27436]: RECV received frame
> >>>>number 8
> >>>>Nov 05 08:14:06.95: [27436]: RECV received frame
> >>>>number 9
> >>>>Nov 05 08:14:07.16: [27436]: RECV received frame
> >>>>number 10
> >>>>Nov 05 08:14:07.38: [27436]: RECV received frame
> >>>>number 11
> >>>>Nov 05 08:14:07.70: [27436]: RECV received frame
> >>>>number 12
> >>>>Nov 05 08:14:07.91: [27436]: RECV received frame
> >>>>number 13
> >>>>Nov 05 08:14:08.12: [27436]: RECV received frame
> >>>>number 14
> >>>>Nov 05 08:14:08.34: [27436]: RECV received frame
> >>>>number 15
> >>>>Nov 05 08:14:08.55: [27436]: RECV received frame
> >>>>number 16
> >>>>Nov 05 08:14:08.76: [27436]: RECV received frame
> >>>>number 17
> >>>>Nov 05 08:14:08.98: [27436]: RECV received frame
> >>>>number 18
> >>>>Nov 05 08:14:09.19: [27436]: RECV received frame
> >>>>number 19
> >>>>Nov 05 08:14:09.40: [27436]: RECV received frame
> >>>>number 20
> >>>>Nov 05 08:14:09.72: [27436]: RECV received frame
> >>>>number 21
> >>>>Nov 05 08:14:09.94: [27436]: RECV received frame
>
=== message truncated ===
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
