[hylafax-users] SEND FAILED; Busy signal detected

["Erik @ Microcontroller.nl" <hylafax@xxxxxxxxxxxxxxxxxx>]

Hi list,

I'm having problems sending faxes, receiving works fine.
I tested sending faxes to an outside number and sending to our internal 'real' faxmachine, the fax answers, picks up, and then nothing happens, no rx/tx activity on the modem. then a timeout occurs and I get a 'busy' error in the logfile (see below) I used a different non class2 modem as well but exactly the same result, when I twist around cables between faxes en sent with the real fax, receive with hylafax it works fine. So there is no issue with real busy lines.

could someone give me some pointers? 

groetjes,
-Erik.

Sep 10 11:02:03.01: [69938]: SESSION BEGIN 00000623 31
Sep 10 11:02:03.01: [69938]: HylaFAX (tm) Version 4.1
Sep 10 11:02:03.01: [69938]: SEND FAX: JOB 13 DEST 1 COMMID 00000623
Sep 10 11:02:03.01: [69938]: DEVICE '/dev/cuaa1'
Sep 10 11:02:03.01: [69938]: DELAY 75 ms
Sep 10 11:02:03.10: [69938]: DELAY 2600 ms
Sep 10 11:02:05.71: [69938]: <-- [4:ATZ\r]
Sep 10 11:02:05.84: [69938]: --> [2:OK]
Sep 10 11:02:05.84: [69938]: <-- [5:ATX3\r]
Sep 10 11:02:05.85: [69938]: --> [4:ATX3]
Sep 10 11:02:05.85: [69938]: --> [2:OK]
Sep 10 11:02:05.85: [69938]: <-- [5:ATE0\r]
Sep 10 11:02:05.86: [69938]: --> [4:ATE0]
Sep 10 11:02:05.86: [69938]: --> [2:OK]
Sep 10 11:02:05.86: [69938]: <-- [5:ATV1\r]
Sep 10 11:02:05.87: [69938]: --> [2:OK]
Sep 10 11:02:05.87: [69938]: <-- [5:ATQ0\r]
Sep 10 11:02:05.88: [69938]: --> [2:OK]
Sep 10 11:02:05.88: [69938]: <-- [7:ATS0=0\r]
Sep 10 11:02:05.89: [69938]: --> [2:OK]
Sep 10 11:02:05.89: [69938]: <-- [7:ATS8=2\r]
Sep 10 11:02:05.90: [69938]: --> [2:OK]
Sep 10 11:02:05.90: [69938]: <-- [8:ATS7=60\r]
Sep 10 11:02:05.91: [69938]: --> [2:OK]
Sep 10 11:02:05.91: [69938]: <-- [6:AT&K3\r]
Sep 10 11:02:05.92: [69938]: --> [2:OK]
Sep 10 11:02:05.92: [69938]: <-- [6:AT&D2\r]
Sep 10 11:02:05.93: [69938]: --> [2:OK]
Sep 10 11:02:05.93: [69938]: <-- [6:AT&C1\r]
Sep 10 11:02:05.94: [69938]: --> [2:OK]
Sep 10 11:02:05.94: [69938]: <-- [14:AT+FCLASS=2.0\r]
Sep 10 11:02:05.95: [69938]: --> [2:OK]
Sep 10 11:02:05.95: [69938]: <-- [9:AT+FLO=2\r]
Sep 10 11:02:05.96: [69938]: --> [2:OK]
Sep 10 11:02:05.96: [69938]: <-- [9:AT+FPP=0\r]
Sep 10 11:02:05.97: [69938]: --> [2:OK]
Sep 10 11:02:05.97: [69938]: <-- [9:AT+FBO=0\r]
Sep 10 11:02:05.98: [69938]: --> [2:OK]
Sep 10 11:02:05.98: [69938]: <-- [10:AT+FCT=30\r]
Sep 10 11:02:05.99: [69938]: --> [2:OK]
Sep 10 11:02:05.99: [69938]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 10 11:02:06.00: [69938]: --> [2:OK]
Sep 10 11:02:06.00: [69938]: <-- [9:AT+FIE=0\r]
Sep 10 11:02:06.01: [69938]: --> [2:OK]
Sep 10 11:02:06.01: [69938]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 10 11:02:06.02: [69938]: --> [2:OK]
Sep 10 11:02:06.02: [69938]: <-- [5:ATM0\r]
Sep 10 11:02:06.03: [69938]: --> [2:OK]
Sep 10 11:02:06.03: [69938]: <-- [14:AT+FCLASS=2.0\r]
Sep 10 11:02:06.14: [69938]: --> [2:OK]
Sep 10 11:02:06.14: [69938]: <-- [9:AT+FLO=2\r]
Sep 10 11:02:06.25: [69938]: --> [2:OK]
Sep 10 11:02:06.25: [69938]: <-- [9:AT+FPP=0\r]
Sep 10 11:02:06.36: [69938]: --> [2:OK]
Sep 10 11:02:06.36: [69938]: <-- [9:AT+FBO=0\r]
Sep 10 11:02:06.47: [69938]: --> [2:OK]
Sep 10 11:02:06.47: [69938]: <-- [10:AT+FCT=30\r]
Sep 10 11:02:06.58: [69938]: --> [2:OK]
Sep 10 11:02:06.58: [69938]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 10 11:02:06.69: [69938]: --> [2:OK]
Sep 10 11:02:06.69: [69938]: <-- [9:AT+FIE=0\r]
Sep 10 11:02:06.80: [69938]: --> [2:OK]
Sep 10 11:02:06.80: [69938]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 10 11:02:06.91: [69938]: --> [2:OK]
Sep 10 11:02:06.91: [69938]: <-- [16:AT+FLI="erik fax"\r]
Sep 10 11:02:07.02: [69938]: --> [2:OK]
Sep 10 11:02:07.02: [69938]: DIAL 1
Sep 10 11:02:07.02: [69938]: <-- [7:ATDT1@\r]
Sep 10 11:03:05.24: [69938]: --> [4:BUSY]
Sep 10 11:03:05.24: [69938]: SEND FAILED: JOB 13 DEST 1 ERR Busy signal detected
Sep 10 11:03:05.24: [69938]: <-- [4:ATH\r]
Sep 10 11:03:05.35: [69938]: --> [2:OK]
Sep 10 11:03:05.35: [69938]: SESSION END