|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Recieve Errors
OK, I replaced the USR modesm with a Multitech ISI5634-PCI/8 card. This seems
to have cured all the previous problems but, as luck would have it, a new
problem has come up. At least one customer is claiming their fax machine
cannot maintain a connection. The only errors I found for today were nine
instances of "RECV FAX: RSPREC error/got DCN" Here is a sample transaction:
Aug 17 13:26:55.52: [ 2244]: SESSION BEGIN 000001369 18003854994
Aug 17 13:26:55.52: [ 2244]: HylaFAX (tm) Version 4.2.0rc2
Aug 17 13:26:55.52: [ 2244]: <-- [4:ATA\r]
Aug 17 13:27:04.60: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:04.60: [ 2244]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyM1a'
Aug 17 13:27:04.60: [ 2244]: RECV FAX: begin
Aug 17 13:27:04.60: [ 2244]: <-- data [35]
Aug 17 13:27:04.60: [ 2244]: <-- data [2]
Aug 17 13:27:04.67: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:04.67: [ 2244]: <-- data [23]
Aug 17 13:27:04.67: [ 2244]: <-- data [2]
Aug 17 13:27:04.73: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:04.73: [ 2244]: <-- data [10]
Aug 17 13:27:04.73: [ 2244]: <-- data [2]
Aug 17 13:27:06.96: [ 2244]: --> [2:OK]
Aug 17 13:27:06.96: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:07.09: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:08.92: [ 2244]: --> [2:OK]
Aug 17 13:27:08.92: [ 2244]: REMOTE TSI "3096333985"
Aug 17 13:27:08.92: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:08.97: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:09.16: [ 2244]: --> [2:OK]
Aug 17 13:27:09.16: [ 2244]: REMOTE wants 9600 bit/s
Aug 17 13:27:09.16: [ 2244]: REMOTE wants A4 page width (215 mm)
Aug 17 13:27:09.16: [ 2244]: REMOTE wants unlimited page length
Aug 17 13:27:09.16: [ 2244]: REMOTE wants 3.85 line/mm
Aug 17 13:27:09.16: [ 2244]: REMOTE wants 1-D MH
Aug 17 13:27:09.16: [ 2244]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 17 13:27:09.16: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:09.22: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:09.25: [ 2244]: --> [2:^P^C]
Aug 17 13:27:09.28: [ 2244]: --> [10:NO CARRIER]
Aug 17 13:27:09.28: [ 2244]: RECV training at v.29 9600 bit/s
Aug 17 13:27:09.28: [ 2244]: <-- [10:AT+FRM=96\r]
Aug 17 13:27:13.78: [ 2244]: --> [0:]
Aug 17 13:27:13.78: [ 2244]: MODEM <Empty line>
Aug 17 13:27:13.78: [ 2244]: <-- data [1]
Aug 17 13:27:13.82: [ 2244]: --> [2:^P^C]
Aug 17 13:27:13.82: [ 2244]: --> [2:OK]
Aug 17 13:27:13.82: [ 2244]: DELAY 75 ms
Aug 17 13:27:13.90: [ 2244]: <-- [9:AT+FTH=3\r]
Aug 17 13:27:14.93: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:14.93: [ 2244]: <-- data [3]
Aug 17 13:27:14.93: [ 2244]: <-- data [2]
Aug 17 13:27:15.34: [ 2244]: --> [2:OK]
Aug 17 13:27:15.34: [ 2244]: TRAINING failed
Aug 17 13:27:15.34: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:15.50: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:16.93: [ 2244]: --> [2:OK]
Aug 17 13:27:16.93: [ 2244]: REMOTE TSI "3096333985"
Aug 17 13:27:16.93: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:16.98: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:17.17: [ 2244]: --> [2:OK]
Aug 17 13:27:17.17: [ 2244]: REMOTE wants 9600 bit/s
Aug 17 13:27:17.17: [ 2244]: REMOTE wants A4 page width (215 mm)
Aug 17 13:27:17.17: [ 2244]: REMOTE wants unlimited page length
Aug 17 13:27:17.17: [ 2244]: REMOTE wants 3.85 line/mm
Aug 17 13:27:17.17: [ 2244]: REMOTE wants 1-D MH
Aug 17 13:27:17.17: [ 2244]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 17 13:27:17.17: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:17.23: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:17.26: [ 2244]: --> [2:^P^C]
Aug 17 13:27:17.29: [ 2244]: --> [10:NO CARRIER]
Aug 17 13:27:17.29: [ 2244]: RECV training at v.29 9600 bit/s
Aug 17 13:27:17.29: [ 2244]: <-- [10:AT+FRM=96\r]
Aug 17 13:27:21.79: [ 2244]: --> [0:]
Aug 17 13:27:21.79: [ 2244]: MODEM <Empty line>
Aug 17 13:27:21.79: [ 2244]: <-- data [1]
Aug 17 13:27:21.84: [ 2244]: --> [2:^P^C]
Aug 17 13:27:21.84: [ 2244]: --> [2:OK]
Aug 17 13:27:21.84: [ 2244]: DELAY 75 ms
Aug 17 13:27:21.92: [ 2244]: <-- [9:AT+FTH=3\r]
Aug 17 13:27:22.92: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:22.92: [ 2244]: <-- data [3]
Aug 17 13:27:22.92: [ 2244]: <-- data [2]
Aug 17 13:27:23.34: [ 2244]: --> [2:OK]
Aug 17 13:27:23.34: [ 2244]: TRAINING failed
Aug 17 13:27:23.34: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:23.47: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:24.93: [ 2244]: --> [2:OK]
Aug 17 13:27:24.93: [ 2244]: REMOTE TSI "3096333985"
Aug 17 13:27:24.93: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:25.01: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:25.17: [ 2244]: --> [2:OK]
Aug 17 13:27:25.17: [ 2244]: REMOTE wants 9600 bit/s
Aug 17 13:27:25.17: [ 2244]: REMOTE wants A4 page width (215 mm)
Aug 17 13:27:25.17: [ 2244]: REMOTE wants unlimited page length
Aug 17 13:27:25.17: [ 2244]: REMOTE wants 3.85 line/mm
Aug 17 13:27:25.17: [ 2244]: REMOTE wants 1-D MH
Aug 17 13:27:25.17: [ 2244]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 17 13:27:25.17: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:25.23: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:25.26: [ 2244]: --> [2:^P^C]
Aug 17 13:27:25.29: [ 2244]: --> [10:NO CARRIER]
Aug 17 13:27:25.29: [ 2244]: RECV training at v.29 9600 bit/s
Aug 17 13:27:25.29: [ 2244]: <-- [10:AT+FRM=96\r]
Aug 17 13:27:29.79: [ 2244]: --> [0:]
Aug 17 13:27:29.79: [ 2244]: MODEM <Empty line>
Aug 17 13:27:29.79: [ 2244]: <-- data [1]
Aug 17 13:27:29.84: [ 2244]: --> [2:^P^C]
Aug 17 13:27:29.84: [ 2244]: --> [2:OK]
Aug 17 13:27:29.84: [ 2244]: DELAY 75 ms
Aug 17 13:27:29.92: [ 2244]: <-- [9:AT+FTH=3\r]
Aug 17 13:27:30.95: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:30.95: [ 2244]: <-- data [3]
Aug 17 13:27:30.95: [ 2244]: <-- data [2]
Aug 17 13:27:31.36: [ 2244]: --> [2:OK]
Aug 17 13:27:31.36: [ 2244]: TRAINING failed
Aug 17 13:27:31.36: [ 2244]: <-- [9:AT+FRH=3\r]
Aug 17 13:27:31.53: [ 2244]: --> [7:CONNECT]
Aug 17 13:27:32.36: [ 2244]: --> [2:OK]
Aug 17 13:27:32.36: [ 2244]: RECV FAX: RSPREC error/got DCN
Aug 17 13:27:32.36: [ 2244]: RECV FAX: end
Aug 17 13:27:32.36: [ 2244]: SESSION END
Looks like the fax modems cannot agree on how to send the data. Is this
something I can fix from my end?
--
Stephen Carville
Unix and Network Adminstrator
DPSI
6033 W.Century Blvd.
Los Angeles, CA 90045
310-342-3602
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
