[hylafax-users] expected signal not received

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] expected signal not received
From: Stephen Carville <stephen@xxxxxxxxxxxxxx>
Date: Fri, 6 Aug 2004 12:32:42 -0700
<sigh>

A new error has cropped up.  I upgraded to 4.2.0rc2 and now all my modems are 
USR.  Now I get a complete fax but hylafax tells  the sende their was an 
error. Is this fixable:

 T.30 T2 timeout, expected signal not received

    ---- Transcript of session follows ----

Aug 06 12:18:06.74: [10220]: SESSION BEGIN 000000687 18003854994
Aug 06 12:18:06.74: [10220]: HylaFAX (tm) Version 4.2.0rc2
Aug 06 12:18:06.74: [10220]: <-- [13:AT+FCLASS=1A\r]
Aug 06 12:18:12.02: [10220]: --> [7:CONNECT]
Aug 06 12:18:12.02: [10220]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS4'
Aug 06 12:18:12.02: [10220]: RECV FAX: begin
Aug 06 12:18:13.98: [10220]: --> [7:CONNECT]
Aug 06 12:18:15.13: [10220]: --> [7:CONNECT]
Aug 06 12:18:15.95: [10220]: --> [2:OK]
Aug 06 12:18:15.95: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:19.05: [10220]: --> [0:]
Aug 06 12:18:19.05: [10220]: MODEM <Empty line>
Aug 06 12:18:19.25: [10220]: MODEM <Timeout>
Aug 06 12:18:19.25: [10220]: DELAY 1500 ms
Aug 06 12:18:20.75: [10220]: <-- [9:AT+FTH=3\r]
Aug 06 12:18:20.88: [10220]: --> [7:CONNECT]
Aug 06 12:18:22.94: [10220]: --> [7:CONNECT]
Aug 06 12:18:24.09: [10220]: --> [7:CONNECT]
Aug 06 12:18:24.91: [10220]: --> [2:OK]
Aug 06 12:18:24.91: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:26.56: [10220]: --> [7:CONNECT]
Aug 06 12:18:27.23: [10220]: --> [2:OK]
Aug 06 12:18:27.23: [10220]: REMOTE TSI "19735354801"
Aug 06 12:18:27.23: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:27.29: [10220]: --> [7:CONNECT]
Aug 06 12:18:27.54: [10220]: --> [2:OK]
Aug 06 12:18:27.54: [10220]: REMOTE wants 14400 bit/s
Aug 06 12:18:27.54: [10220]: REMOTE wants A4 page width (215 mm)
Aug 06 12:18:27.54: [10220]: REMOTE wants unlimited page length
Aug 06 12:18:27.54: [10220]: REMOTE wants 3.85 line/mm
Aug 06 12:18:27.54: [10220]: REMOTE wants 2-D MMR
Aug 06 12:18:27.54: [10220]: REMOTE wants T.30 Annex A, 256-byte ECM
Aug 06 12:18:27.54: [10220]: RECV training at v.17 14400 bit/s
Aug 06 12:18:27.54: [10220]: <-- [11:AT+FRM=145\r]
Aug 06 12:18:29.28: [10220]: --> [7:CONNECT]
Aug 06 12:18:31.05: [10220]: RECV: TCF 2917 bytes, 5% non-zero, 2753 zero-run
Aug 06 12:18:31.08: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:31.08: [10220]: DELAY 75 ms
Aug 06 12:18:31.16: [10220]: TRAINING succeeded
Aug 06 12:18:31.16: [10220]: <-- [9:AT+FTH=3\r]
Aug 06 12:18:31.29: [10220]: --> [7:CONNECT]
Aug 06 12:18:32.51: [10220]: --> [2:OK]
Aug 06 12:18:32.51: [10220]: <-- [11:AT+FRM=146\r]
Aug 06 12:18:33.68: [10220]: --> [7:CONNECT]
Aug 06 12:18:34.24: [10220]: RECV received frame number 0
Aug 06 12:18:34.38: [10220]: RECV received frame number 1
Aug 06 12:18:34.52: [10220]: RECV received frame number 2
Aug 06 12:18:34.66: [10220]: RECV received frame number 3
Aug 06 12:18:34.80: [10220]: RECV received frame number 4
Aug 06 12:18:34.94: [10220]: RECV received frame number 5
Aug 06 12:18:35.08: [10220]: RECV received frame number 6
Aug 06 12:18:35.22: [10220]: RECV received frame number 7
Aug 06 12:18:35.36: [10220]: RECV received frame number 8
Aug 06 12:18:35.50: [10220]: RECV received frame number 9
Aug 06 12:18:35.64: [10220]: RECV received frame number 10
Aug 06 12:18:35.78: [10220]: RECV received frame number 11
Aug 06 12:18:35.92: [10220]: RECV received frame number 12
Aug 06 12:18:36.06: [10220]: RECV received frame number 13
Aug 06 12:18:36.20: [10220]: RECV received frame number 14
Aug 06 12:18:36.34: [10220]: RECV received frame number 15
Aug 06 12:18:36.48: [10220]: RECV received frame number 16
Aug 06 12:18:36.62: [10220]: RECV received frame number 17
Aug 06 12:18:36.76: [10220]: RECV received frame number 18
Aug 06 12:18:36.90: [10220]: RECV received frame number 19
Aug 06 12:18:37.04: [10220]: RECV received frame number 20
Aug 06 12:18:37.18: [10220]: RECV received frame number 21
Aug 06 12:18:37.32: [10220]: RECV received frame number 22
Aug 06 12:18:37.46: [10220]: RECV received frame number 23
Aug 06 12:18:37.60: [10220]: RECV received frame number 24
Aug 06 12:18:37.74: [10220]: RECV received frame number 25
Aug 06 12:18:37.88: [10220]: RECV received frame number 26
Aug 06 12:18:38.02: [10220]: RECV received frame number 27
Aug 06 12:18:38.16: [10220]: RECV received frame number 28
Aug 06 12:18:38.30: [10220]: RECV received frame number 29
Aug 06 12:18:38.44: [10220]: RECV received frame number 30
Aug 06 12:18:38.58: [10220]: RECV received frame number 31
Aug 06 12:18:38.79: [10220]: RECV received frame number 32
Aug 06 12:18:38.93: [10220]: RECV received frame number 33
Aug 06 12:18:39.07: [10220]: RECV received frame number 34
Aug 06 12:18:39.22: [10220]: RECV received frame number 35
Aug 06 12:18:39.36: [10220]: RECV received frame number 36
Aug 06 12:18:39.51: [10220]: RECV received frame number 37
Aug 06 12:18:39.65: [10220]: RECV received frame number 38
Aug 06 12:18:39.80: [10220]: RECV received frame number 39
Aug 06 12:18:39.94: [10220]: RECV received frame number 40
Aug 06 12:18:40.08: [10220]: RECV received frame number 41
Aug 06 12:18:40.22: [10220]: RECV received frame number 42
Aug 06 12:18:40.36: [10220]: RECV received frame number 43
Aug 06 12:18:40.50: [10220]: RECV received frame number 44
Aug 06 12:18:40.72: [10220]: RECV received frame number 45
Aug 06 12:18:40.86: [10220]: RECV received frame number 46
Aug 06 12:18:41.01: [10220]: RECV received frame number 47
Aug 06 12:18:41.16: [10220]: RECV received frame number 48
Aug 06 12:18:41.31: [10220]: RECV received frame number 49
Aug 06 12:18:41.45: [10220]: RECV received frame number 50
Aug 06 12:18:41.60: [10220]: RECV received frame number 51
Aug 06 12:18:41.74: [10220]: RECV received frame number 52
Aug 06 12:18:41.88: [10220]: RECV received frame number 53
Aug 06 12:18:42.02: [10220]: RECV received frame number 54
Aug 06 12:18:42.17: [10220]: RECV received frame number 55
Aug 06 12:18:42.32: [10220]: RECV received frame number 56
Aug 06 12:18:42.47: [10220]: RECV received frame number 57
Aug 06 12:18:42.61: [10220]: RECV received frame number 58
Aug 06 12:18:42.76: [10220]: RECV received frame number 59
Aug 06 12:18:42.92: [10220]: RECV received frame number 60
Aug 06 12:18:43.07: [10220]: RECV received frame number 61
Aug 06 12:18:43.14: [10220]: RECV received frame number 62
Aug 06 12:18:43.22: [10220]: RECV received RCP frame
Aug 06 12:18:43.37: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:43.37: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:44.28: [10220]: --> [7:CONNECT]
Aug 06 12:18:44.53: [10220]: --> [5:ERROR]
Aug 06 12:18:44.53: [10220]: MODEM Command error
Aug 06 12:18:44.53: [10220]: FCS error
Aug 06 12:18:44.53: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:44.58: [10220]: --> [7:CONNECT]
Aug 06 12:18:45.78: [10220]: --> [5:ERROR]
Aug 06 12:18:45.78: [10220]: MODEM Command error
Aug 06 12:18:45.78: [10220]: FCS error
Aug 06 12:18:45.78: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:47.83: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:47.83: [10220]: MODEM No carrier
Aug 06 12:18:47.83: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:49.88: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:49.88: [10220]: MODEM No carrier
Aug 06 12:18:49.88: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:51.93: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:51.93: [10220]: MODEM No carrier
Aug 06 12:18:51.93: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:53.98: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:53.98: [10220]: MODEM No carrier
Aug 06 12:18:53.98: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:56.03: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:56.03: [10220]: MODEM No carrier
Aug 06 12:18:56.03: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:18:58.08: [10220]: --> [10:NO CARRIER]
Aug 06 12:18:58.08: [10220]: MODEM No carrier
Aug 06 12:18:58.08: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:00.13: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:00.13: [10220]: MODEM No carrier
Aug 06 12:19:00.13: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:02.18: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:02.18: [10220]: MODEM No carrier
Aug 06 12:19:02.18: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:04.23: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:04.23: [10220]: MODEM No carrier
Aug 06 12:19:04.23: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:06.28: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:06.28: [10220]: MODEM No carrier
Aug 06 12:19:06.28: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:08.33: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:08.33: [10220]: MODEM No carrier
Aug 06 12:19:08.33: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:10.38: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:10.38: [10220]: MODEM No carrier
Aug 06 12:19:10.38: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:12.43: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:12.43: [10220]: MODEM No carrier
Aug 06 12:19:12.43: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:14.48: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:14.48: [10220]: MODEM No carrier
Aug 06 12:19:14.48: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:16.53: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:16.53: [10220]: MODEM No carrier
Aug 06 12:19:16.53: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:18.58: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:18.58: [10220]: MODEM No carrier
Aug 06 12:19:18.58: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:20.63: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:20.63: [10220]: MODEM No carrier
Aug 06 12:19:20.63: [10220]: <-- [9:AT+FRH=3\r]
Aug 06 12:19:22.68: [10220]: --> [10:NO CARRIER]
Aug 06 12:19:22.68: [10220]: MODEM No carrier
Aug 06 12:19:22.68: [10220]: RECV keeping unconfirmed page
Aug 06 12:19:22.75: [10220]: RECV: 16128 bytes of data, 1074 total lines
Aug 06 12:19:22.75: [10220]: RECV FAX (000000687): from 19735354801, page 1 in 
0:51, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
Aug 06 12:19:22.75: [10220]: RECV FAX (000000687): recvq/fax000004265.tif from 
19735354801, route to <unspecified>, 1 pages in 1:10
Aug 06 12:19:22.75: [10220]: RECV FAX: T.30 T2 timeout, expected signal not 
received
Aug 06 12:19:22.75: [10220]: <-- [9:AT+FTH=3\r]
Aug 06 12:19:22.87: [10220]: --> [7:CONNECT]
Aug 06 12:19:24.09: [10220]: --> [2:OK]
Aug 06 12:19:24.09: [10220]: RECV FAX (000000687): session with 19735354801 
terminated abnormally: T.30 T2 timeout, expected signal not received
Aug 06 12:19:24.09: [10220]: RECV FAX: bin/faxrcvd "recvq/fax000004265.tif" 
"ttyS4" "000000687" "T.30 T2 timeout, expected signal not received" "" ""
Aug 06 12:19:24.11: [10220]: RECV FAX: end
Aug 06 12:19:24.11: [10220]: SESSION END

-- 
Stephen Carville
Unix and Network Adminstrator
DPSI
6033 W.Century Blvd.
Los Angeles, CA 90045
310-342-3602

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Follow-Ups:
- Re: [hylafax-users] expected signal not received
  - From: Lee Howard
- Re: [hylafax-users] expected signal not received
  - From: Kevin P. Fleming
Prev by Date: Re: [hylafax-users] R: Receiving faxes then forwarding to external email
Next by Date: Re: [hylafax-users] R: Receiving faxes then forwarding to external email
Previous by thread: Re: [hylafax-users] R: Receiving faxes then forwarding to external email
Next by thread: Re: [hylafax-users] expected signal not received
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services