[hylafax-users] Need Urgent Help

[Muhammad Tabish Sarwar <mtsarwar@xxxxxxxxx>]

I m using hylafax 4.1.8 with capi installed ..all the things are set but c2faxrecv is not responding calls ....I have to set the hylafax server just to get the fax not to send ...

I have no idea y is that so ...

Any ways i did the following steps ..plz let me know if something is missing

 

1)Installed hylafax 4.1.8 upto faxsetup and didnt run the faxaddmodem (i come to know abt that from the net).

2)configured with teh source and soppl path of hylafax , installed and give the path to the spool library with the -p option.

3)run c2faxrecv &

 

config.faxCapi is created in the spool directory of hylafax ...when i use faxstat i get :

HylaFAX scheduler on FaxMachine: Running

Modem faxCAPI (+xx.xx.xxxxxx): Running and idle

 

here is a brief look at the config .faxcapi file :

 

SpoolDir:               /var/spool/hylafax/

FaxRcvdCmd:             /var/spool/hylafax//bin/faxrcvd

PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd

FaxRcvdGetsMSN:         1
FaxReceiveUser:         uucp

LogFile:                     /tmp/capifax.log

LogFileMode:            0600

 

# The section contains information about a virtual device; the subsection the
# call acceptance information for each controller.
# Any number of sections containing any number of subsections may be
# generated, but each section must receive a different HylafaxDeviceName; and
# a different controller must be listed in every subsection within a section.
# For stand-alone operation, it is sufficient to have just one section with
# as many subsections as required, since virtual DeviceNames do not play
# any role in this mode of operatio

{

      HylafaxDeviceName:          faxCAPI

       RecvFileMode:               0600

       FAXNumber:                  +xx.xx.xxxxxxx

       LocalIdentifier:            "AVM CAPI4HylaFAX"

       MaxConcurrentRecvs:         2

       OutgoingController:         1

       OutgoingMSN:

       SuppressMSN:                0

       NumberPrefix:

       UseISDNFaxService:          0

       RingingDuration:            0

}

THIS IS MY CONCERNED AS I HAVE TO SET SERVER IN RECIEVE MODE

 

# ----------- incoming params -----------  

{

    Controller:             1

    AcceptSpeech:           0

    UseDDI:                 0                      (bcoz i have just one number right now)

   DDIOffset:              "12345"

    IncomingDDIs:

    IncomingMSNs:

}

     

      
Please let me is there is any thing wrong ...any advice will be highly appreciated .

Thanks

 

 

 

 

 

 

 

 

I also read the readme files but all look simple in that ..

I  m using Eicon BRI card and PRI card ...

 

 

Muhammad Tabish Sarwar.

Software Engineer

infiniLogic Inc.

14th Floor IT Park Sharah-e-Faisal .

Cell 0333-2341463.

 

 

---

Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!