|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Hylafax 4.18: ps2fax makes "exit status 0xb"
Hello,
I have a problem with Hylafax 4.18 and SuSE 9.1 if I want to send a fax. I
can receive without Problems, but the other way is a problem.
Everytime if I use SuseFax or
sendfax -n -D -d xxxxxxxx fax.ps
I get in the logfiles the following messages:
Jul 24 10:49:06 boston FaxQueuer[3106]: JOB 22 (active dest +49xxxxxxxxxxx pri
127 tts 0:00 killtime 2:59:00): ACTIVE
Jul 24 10:49:06 boston FaxQueuer[3106]: JOB 22 (active dest +49xxxxxxxxxxx pri
127 tts 0:00 killtime 2:59:00): PREPARE START
Jul 24 10:49:06 boston FaxQueuer[4980]: JOB 22 (active dest +49xxxxxxxxxxx pri
127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o docq/doc
22.ps;30 -r 98 -w 1728 -l 280 -m 30 -1 docq/doc22.ps.22
Jul 24 10:49:06 boston FaxQueuer[4980]: JOB 22: CONVERT DOCUMENT: exit status
0xb
Specifically I look for the line with ps2fax. There I find the wrong
parameters ";30":
ps2fax -o docq/doc22.ps;30 -r 98 -w 1728 -l 280 -m 30 -1 docq/doc22.ps.22
I believe it right if I make
ps2fax -o docq/doc22.ps -r 98 -w 1728 -l 280 -m 30 -1 docq/doc22.ps.22
without ",30". In this case ps2fax works right.
But can somebody tell how I can tell it Hylafax or hfaxd, because I don't know
where I can configure this special parameters for ps2fax.
My config-files looks like:
etc/config
LogFacility: daemon
CountryCode: 49
AreaCode: 7156
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: "etc/dialrules"
ServerTracing: 0xFFF
SessionTracing: 0xFFF
ContCoverPage: etc/cover.templ
MaxSendPages: 30
ModemGroup: "any:.*"
Thanks in advance!
Andreas
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
