[hylafax-users] Unspecified Phase D error with MT5634ZBA-V92 MultiTech modem

["Steve Melo" <smelo@xxxxxxxxxxxxxxxxx>]

Greetings,

 

Recently I obtained a MT5634ZBA-V92 MultiTech modem as suggested in the
mailing list.  Since then I have been receiving "Unspecified Phase D error"
and I wonder if there is something wrong with my setup.  I have the latest
firmware 1.28H, running the modem in Class 2.1, with Hylafax 4.1.8.

 

Can anyone please give share some insight about Phase errors, what are they
and how can the be avoided?
I wish that I could understand this transcripts myself ..I can't,  so I have
pasted a copy here along with the modem's config file:

 

--begin config.ttyS0-------------------------------------------------
# $Id: lucent-mt-21,v 1.8 2003/02/09 02:22:47 darren Exp $
#
# prototype config file for MultiTech MT5634ZBA-V.92-NAM
#

 

#
#
CountryCode:            1
AreaCode:               ###
FAXNumber:              ###.####
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0x08501
SessionTracing:         0xFFF
RecvFileMode:           0640
LogFileMode:            0640
DeviceMode:             0660
RingsBeforeAnswer:      1
SpeakerVolume:          on
GettyArgs:              "-r -b %l"
LocalIdentifier:        "***************"
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           100
ModemReadyState:        D
#
#

 

ModemType:              Class2.1
ModemRate:              19200           # for V.34 faxing
ModemFlowControl:       xonxoff
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3

 

Class2APCmd:            AT+FAP=1,1,1
Class2BUGCmd:           AT+FBU=0        # early firmware is buggy
Class2CQCmd:            AT+FCQ=1,0
Class2SendRTC:          yes
Class2UseHex:           yes

 

# versions that respond to AT+FFC=? with non-zero data support RTFCC
# Class2RTFCC:          yes

 

# unfortunately, HylaFAX can't currently receive in color
ModemAnswerCmd:         AT+FCC=,,,,,,,,0;A
# and, let's try to prevent any color sending attempts, also
ModemDialCmd:           AT+FCC=,,,,,,,,0;DT%s

# If your line supports Caller-ID, you may want to uncomment this...
# QualifyCID:           etc/cid         # you must create this file
# ModemResetCmds:       AT+VCID=1
# CIDNumber:            "NMBR="
# CIDName:              "NAME="

 

# Or with the MT5634ZBA-DID you'll probably need something like...
# QualifyCID:           etc/cid         # you must create this file
# ModemResetCmds:       AT*DS1*DD0*DF1  # enable DTMF-DID
# CIDNumber:            "DTMF"          # format of AT*DF1
# CIDNumberAnswerLength:        4       # four DTMF-DID digits then ATA
--end
config.ttyS0--------------------------------------------------------------

 

--begin transcript of failed fax------------------------------------------
Jul 27 05:13:02.54: [ 1038]: SESSION BEGIN 00002865 ##########
Jul 27 05:13:02.54: [ 1038]: HylaFAX (tm) Version 4.1.8
Jul 27 05:13:02.54: [ 1038]: <-- [19:AT+FCC=,,,,,,,,0;A\r]
Jul 27 05:13:16.65: [ 1038]: --> [4:+FCO]
Jul 27 05:13:16.65: [ 1038]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Jul 27 05:13:16.65: [ 1038]: STATE CHANGE: ANSWERING -> RECEIVING
Jul 27 05:13:16.65: [ 1038]: MODEM input buffering enabled
Jul 27 05:13:16.65: [ 1038]: RECV FAX: begin
Jul 27 05:13:16.65: [ 1038]: --> [27:+FTI:"        ### #######"]
Jul 27 05:13:16.65: [ 1038]: REMOTE TSI "### #######"
Jul 27 05:13:16.65: [ 1038]: --> [22:+FCS:0,B,0,2,3,1,0,0,0]
Jul 27 05:13:16.65: [ 1038]: REMOTE wants 28800 bit/s
Jul 27 05:13:16.65: [ 1038]: REMOTE wants page width 1728 pixels in 215 mm
Jul 27 05:13:16.65: [ 1038]: REMOTE wants unlimited page length
Jul 27 05:13:16.65: [ 1038]: REMOTE wants 3.85 line/mm
Jul 27 05:13:16.65: [ 1038]: REMOTE wants 2-D MMR
Jul 27 05:13:16.65: [ 1038]: REMOTE wants T.30 Annex A, ECM
Jul 27 05:13:16.65: [ 1038]: --> [2:OK]
Jul 27 05:13:16.65: [ 1038]: <-- [7:AT+FDR\r]
Jul 27 05:13:21.81: [ 1038]: --> [7:+FHS:A0]
Jul 27 05:13:21.81: [ 1038]: REMOTE HANGUP: Unspecified Phase D error (codeA0)
Jul 27 05:13:21.81: [ 1038]: RECV FAX (00002865): recvq/fax02347.tif from
### #######, route to <unspecified>, 0 pages in 0:05
Jul 27 05:13:21.81: [ 1038]: RECV FAX: Unspecified Phase D error
Jul 27 05:13:21.81: [ 1038]: RECV FAX (00002865): session with ### #######
terminated abnormally: Unspecified Phase D error
Jul 27 05:13:21.81: [ 1038]: RECV FAX: bin/faxrcvd "recvq/fax02347.tif"
"ttyS0" "00002865" "Unspecified Phase D error" "" ""
Jul 27 05:13:21.94: [ 1038]: RECV FAX: end
Jul 27 05:13:21.94: [ 1038]: SESSION END
--end transcript of failedfax-------------------------------------------