Re: [hylafax-users] Eicon diva server PRI config

[Chris Parsons <chrisp@xxxxxxxxxxxxxx>]

Heres my config for an eicon 4BRI card if it helps.

http://www.hylafax.org/archive/2003-01/msg00159.html


However, I do not use the eicon drivers but the ISDN4Linux in the kernel.
Its the long winded way of configuring it, but it works and lately has been
working well.



Chris.
InfoTec Communications.

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Iain Sims
Sent: Thursday, 22 July 2004 12:36 AM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Eicon diva server PRI config


If anyone has a working installation of this card, would they please post
their config file for the modems?? I've been battling issues with this card
and Hylafax for sometime now with no success. Almost every fax comes in with
an 'Unspecified Phase D error'. I've checked the posts and the following is
my config...which still gives these errors.

CountryCode:            xxx
AreaCode:
FAXNumber:              +xxxxxx
LongDistancePrefix:     00
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        xxx
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
ModemType:              Class2
ModemRate:              14400
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3
Class2APQueryCmd:       none
Class2SPLCmd:           none
Class2TBCCmd:           none
Class2PHCTOCmd:         none
Class2ECMType:          2.0
Class2CQQueryCmd:       !3
Class2CQCmd:            AT
QualifyCID:             etc/cid
CIDName:                "DAD: "
CIDNumber:              "CID: "
ModemSoftResetCmd:      "ATZ\nAT#CID=14"
ModemWaitTimeCmd:       ATS7=120
ModemSoftResetCmdDelay: 0
ModemResetDelay:        0
ModemBaudRateDelay:     0
ModemDTRDropDelay:      0
ModemAnswerCmd:         "ATS0=255;A"
ModemDialCmd:           ATS0=255;DT%s
FaxT2Timer:             70000
FaxT4Timer:             31000
ModemPageDoneTimeout:   180000
Class2UseHex:           yes
PollLockWait:           5

TIA

Iain.



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*