|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Problem with multistrip MMR encoded images
Thanks for testing RC1 Kris, and for the detailed problem report! I've
opened a bug at:
http://bugs.hylafax.org/bugzilla
and I encourage you to file issues there yourself in the future, to make
sure they get prompt attention.
-Darren
--
Darren Nickerson
Senior Sales & Support Engineer
iFax Solutions, Inc. www.ifax.com
darren.nickerson@xxxxxxxx
+1.215.438.4638
+1.215.243.8335 (fax)
----- Original Message -----
From: <hylafax-users-bounce@xxxxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Monday, June 28, 2004 7:32 PM
Subject: [hylafax-users] Problem with multistrip MMR encoded images
> When sending certain MMR encoded images the receiving fax machine does
> not print the page. Also, the image sends much too fast for how large
> the tiff image is. doc369_multistrip.tif is 123,866 bytes yet according
> to hylafax it sends the page in only 4 seconds.
>
> This problem only happens when HylaFAX does not need to convert the tiff
> image before it sends it. Here's the sendfax command:
> sendfax -n -m -3 -d "xxxxxxx" doc369_multistrip.tif
>
> Here's tiffinfo for doc369_multistrip.tif:
> TIFF Directory at offset 0x1e0a6
> Image Width: 1728 Image Length: 2206
> Resolution: 204, 196 pixels/inch
> Bits/Sample: 1
> Compression Scheme: CCITT Group 4
> Photometric Interpretation: min-is-white
> Thresholding: halftone or dithered scan
> FillOrder: msb-to-lsb
> Date & Time: "2004:05:25 15:11:50"
> Orientation: row 0 top, col 0 lhs
> Samples/Pixel: 1
> Rows/Strip: 37
> Planar Configuration: single image plane
> Page Number: 0-1
> Group 4 Options: (0 = 0x0)
>
> Here is the log file:
> Jun 29 16:08:21.39: [ 5677]: SESSION BEGIN 000000027 xxxxxxx
> Jun 29 16:08:21.39: [ 5677]: HylaFAX (tm) Version 4.2.0rc1
> Jun 29 16:08:21.39: [ 5677]: SEND FAX: JOB 22 DEST xxxxxxx COMMID
> 000000027 DEVICE '/dev/ttyS4'
> Jun 29 16:08:21.39: [ 5677]: <-- [14:AT+FCLASS=1.0\r]
> Jun 29 16:08:21.50: [ 5677]: --> [2:OK]
> Jun 29 16:08:21.50: [ 5677]: <-- [14:AT+F34=14,1,2\r]
> Jun 29 16:08:21.61: [ 5677]: --> [2:OK]
> Jun 29 16:08:21.61: [ 5677]: DIAL xxxxxxx
> Jun 29 16:08:21.61: [ 5677]: <-- [17:ATDTxxxxxxx\r]
> Jun 29 16:08:46.08: [ 5677]: --> [9:+F34:10,1]
> Jun 29 16:08:46.08: [ 5677]: V.8 handshaking succeeded, V.34-Fax
> (SuperG3) capability enabled.
> Jun 29 16:08:46.08: [ 5677]: Primary channel rate: 24000 bit/s, Control
> channel rate: 1200 bit/s.
> Jun 29 16:08:46.08: [ 5677]: --> [7:CONNECT]
> Jun 29 16:08:46.08: [ 5677]: Control channel selected
> Jun 29 16:08:46.12: [ 5677]: REMOTE NSF "86 00 DA 00 00 C0 00"
> Jun 29 16:08:46.12: [ 5677]: NSF remote fax equipment: unknown
> Jun 29 16:08:46.32: [ 5677]: REMOTE CSI "xxxxxxx"
> Jun 29 16:08:46.42: [ 5677]: REMOTE best rate 33600 bit/s
> Jun 29 16:08:46.42: [ 5677]: REMOTE max A4 page width (215 mm)
> Jun 29 16:08:46.42: [ 5677]: REMOTE max unlimited page length
> Jun 29 16:08:46.42: [ 5677]: REMOTE best vres 7.7 line/mm
> Jun 29 16:08:46.42: [ 5677]: REMOTE best format 2-D MMR
> Jun 29 16:08:46.42: [ 5677]: REMOTE supports T.30 Annex A, 256-byte ECM
> Jun 29 16:08:46.42: [ 5677]: REMOTE best 10 ms, 5 ms/scanline
> Jun 29 16:08:46.42: [ 5677]: USE 24000 bit/s
> Jun 29 16:08:46.42: [ 5677]: USE error correction mode
> Jun 29 16:08:46.42: [ 5677]: USE 0 ms/scanline
> Jun 29 16:08:46.42: [ 5677]: SEND file "docq/doc22.tif;f1"
> Jun 29 16:08:46.42: [ 5677]: USE A4 page width (215 mm)
> Jun 29 16:08:46.42: [ 5677]: USE unlimited page length
> Jun 29 16:08:46.42: [ 5677]: USE 7.7 line/mm
> Jun 29 16:08:46.42: [ 5677]: USE 2-D MMR
> Jun 29 16:08:46.42: [ 5677]: <-- data [23]
> Jun 29 16:08:46.42: [ 5677]: <-- data [2]
> Jun 29 16:08:46.42: [ 5677]: <-- data [7]
> Jun 29 16:08:46.42: [ 5677]: <-- data [2]
> Jun 29 16:08:47.28: [ 5677]: SEND begin page
> Jun 29 16:08:47.28: [ 5677]: SEND EOFB
> Jun 29 16:08:47.28: [ 5677]: SEND send frame number 0
> Jun 29 16:08:47.28: [ 5677]: SEND send frame number 1
> Jun 29 16:08:47.28: [ 5677]: SEND send frame number 2
> Jun 29 16:08:47.28: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: Primary channel selected
> Jun 29 16:08:48.91: [ 5677]: <-- data [263]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [260]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [263]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [3]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [3]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [3]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:48.91: [ 5677]: <-- data [2]
> Jun 29 16:08:49.69: [ 5677]: Control channel selected
> Jun 29 16:08:49.69: [ 5677]: <-- data [7]
> Jun 29 16:08:49.69: [ 5677]: <-- data [2]
> Jun 29 16:08:49.69: [ 5677]: SEND send PPS (partial page signal)
> Jun 29 16:08:49.69: [ 5677]: SEND send EOP (no more pages or documents)
> Jun 29 16:08:50.36: [ 5677]: SEND recv MCF (message confirmation)
> Jun 29 16:08:50.36: [ 5677]: SEND end page
> Jun 29 16:08:50.36: [ 5677]: SEND FAX (000000027): FROM xxx TO xxxxxxx
> (page 1 of 1 sent in 0:04)
> Jun 29 16:08:50.36: [ 5677]: SEND FAX (000000027): FROM xxx TO xxxxxxx
> (docq/doc22.tif;f1 sent in 0:04)
> Jun 29 16:08:50.36: [ 5677]: <-- data [3]
> Jun 29 16:08:50.36: [ 5677]: <-- data [2]
> Jun 29 16:08:50.36: [ 5677]: <-- data [2]
> Jun 29 16:08:51.14: [ 5677]: --> [2:]
> Jun 29 16:08:51.14: [ 5677]: <-- [5:ATH0\r]
> Jun 29 16:08:51.14: [ 5677]: --> [2:OK]
> Jun 29 16:08:51.15: [ 5677]: SESSION END
>
> If I use tiffcp and only change Rows/Strip to 2206 then the page prints
> out and takes 60 seconds to send. This problem is always reproducible.
>
>
> If I turn ECM off on the receiver but use the same sendfax command as
> above then similar behavior occurs, looks like it sends ok but nothing
> prints out. Sending the second time with ECM off results in the page
> being printed out because HylaFAX converts the document before it sends
> it and the Rows/Strip tag is set to the image length.
>
> Kris
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
> To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
