Re: [hylafax-users] Internet PORT number/s for Hylafax behind a firewall.

[Matt <mathfretwell@xxxxxxxxxxxxxxxx>]

> I am tring to find out what port number/s that Hylafax require to be 
> open on the firewall so I can send fax's through the server across the 
> internet.
> 
> I have found a couple of email's that relate to ports 444 and 4559 but I 
> have tried them and they did not work :( so there must be more or it 
> must be required a different way.
> 
> I also know it use's a modified FTP and seems to releate to the client 
> software to work out which ports are to be opened up.
> 
> The 2 peices of software I am tring to use are
> http://www.cypheus.de/ and http://winprinthylafax.sourceforge.net/
> 
> both of which work correctly inside the network were there is no 
> firewall but open both of those above ports for inbound for TCP and UDP 
> does not solve the challange.
> 
> There must be somewere or someone must know a way to get hylafax to use 
> a smaller set number of ports that can be opened for inbound and 
> outbound to and from the hylafax server.
> 
> Currently using Hylafax 4.1.8 but I would not suspect that the ports 
> would change with a newer version but if there is a setting in a newer 
> version that can force the ports I would upgrade if needed.
> 
> Thanks for your advice.
> 
> David.
> 

 Port 4559 is the port used. This is more likely a firewall issue. This is
dependant upon firewall type, port mapping, redirection and nat(if used). Could
be all or any.

Matt


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*