[hylafax-users] Addaptive answer

["Zoltan Szecsei" <zoltans@xxxxxxxxxxxxxx>]

Hi All,

Any clues as to why my adaptive answer is not working?

A few days ago it worked for the first incoming call (after reboot) but now
not at all - not even after a system reboot.

config.ttyS0 contains:

CountryCode:            27
AreaCode:               21
FAXNumber:              +27.21.701.8492
LocalIdentifier:        "Geograph+27217018492"
LongDistancePrefix:     0
InternationalPrefix:    09
DialStringRules:        etc/dialrules
ServerTracing:          11
SessionTracing:         11
RecvFileMode:           0666
LogFileMode:            0666
DeviceMode:             0666
RingsBeforeAnswer:      1
SpeakerVolume:          On
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Geograph (Pty) Ltd"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           100
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              19200
ModemFlowControl:       xonxoff         # default
ModemWaitForConnect:    yes             # wait for CONNECT on answer
#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FCLASS=2;+FAA=1 # enable in class 0
#
ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
Class2RecvDataTrigger:  "\022"          # a la 2388-B



TIA,
Zoltan.



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*