Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Faxes are sent corrupted :(



Hi
I'm having problems sending faxes with Hylafax. I see I have exactly the same 
problem as someone had in 1999:

http://www.hylafax.org/archive/1999-09/msg00074.html
Faxes sent by Hylafax are received corrupted, as ^this mail^ shows.
I see no answers to this email, and I've searched list archives and found 
nothing... so please can anyone give me a hint on what's going on? Where 
should I look at?

I'm using Debian unstable packaged Hylafax, version 4.1.8-13, with a 
Conceptronic Serial Modem. It's a send-only environment.

Thank you very much!

root@tomas:/etc/hylafax# cat config.ttyS0
# $Id: topic,v 1.3 2002/05/24 16:24:52 darren Exp $
#
# prototype config for Topic modems and other similarly broken firmwares
#

#
CountryCode:            34
AreaCode:               myareacode
FAXNumber:              myfaxnumber
LongDistancePrefix:     1
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          0x08501
SessionTracing:         0x08501
RecvFileMode:           0640
LogFileMode:            0640
DeviceMode:             0660
RingsBeforeAnswer:      0
SpeakerVolume:          Low
GettyArgs:              "-r -b %l"
LocalIdentifier:        "Aplia S.L."
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#

ModemType:              Class1          # use this to supply a hint

# as of v1.20, +FTS is not supported, which will cause "Stop and wait"
# failures unless we use software pauses instead...

Class1PPMWaitCmd:       "<delay\0727>"  # \072 == :  to avoid awk problem
Class1TCFWaitCmd:       "<delay\0727>"
Class1EOPWaitCmd:       "<delay\0729>"
Class1SwitchingCmd:     "<delay\0727>"  # assumption: +FRS not supported

root@tomas:/etc/hylafax# grep -v "^#" hfaxd.conf
LogFacility:            daemon          # syslog facility (want this 1st))
ServerTracing:          0x001           # just server operation
JobFmt:                 "%-3j %3i %1a %6.6o %-14.14e %5P %5D %7z %.25s"

root@tomas:/etc/hylafax# grep -v "^#" hyla.conf
Host:                   localhost
Verbose:                No
TimeZone:               local
DialRules:              "/etc/hylafax/dialrules"

root@tomas:/etc/hylafax# cat setup.modem
# Warning, this file was automatically generated by faxsetup
# on mar jun 22 11:28:07 CEST 2004 for root
prompt()
{
   echo -n "$* "
}
            ttyPort()
            {
                expr $1 : 'tty\(.*\)'
            }
            ttyLocks()
            {
                echo $UUCP_LOCKDIR/LCK..$1
            }
            ttyAliases()
            {
                echo /dev/$1
            }
            ttyDev()
            {
                echo /dev/$1
            }
            checkPort()
            {
                 return
            }
            ttyStty()
            {
                echo /bin/stty
            }
            ttySpeeds()
            {
                speeds=
                if [ -z "$SPEED" ]; then
                    for s in 38400 19200 9600 4800 2400 1200; do
                        onDev /bin/stty $s </dev/null >/dev/null 2>&1 && 
speeds="$speeds $s"
                    done
                fi
                echo $speeds
            }

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services