Re: [hylafax-users] Only every 2nd fax succeeds with Class1.

["Bruce Whittaker" <bwhittak@xxxxxxxxxxxxx>]

I feel as though I've found my problem - I can now send multiple faxes without error.

The implementation of some of the Class 1 commands for the Netcomm modem that I'm playing with appears to be a little different to other modems. In short I suspect it isn't resetting properly.

I'm providing the information I have to Lee in the hope that it can benefit others in the future releases.

Cheers,

Bruce Whittaker,
CASS Support,
Extension  34193
External     (02) 9269 4193.
----------------------------------------------------------------------------------------
This e-mail may contain confidential or privileged information.   If you have received it in error, please notify the sender immediately via return e-mail and then delete the original e-mail. EnergyAustralia has collected your business contact details for dealing with you in your business capacity. More information about how we handle your personal information, including your right of access is contained at http://www.energy.com.au.
----------------------------------------------------------------------------------------

Pedro Rocadas <procadas@xxxxxxxxx> Sent by: hylafax-users-bounce@xxxxxxxxxxx 11/06/2004 19:43

To:        hylafax-users@xxxxxxxxxxx         cc:                 Subject:        Re: [hylafax-users] Only every 2nd fax succeeds with Class1.

--- Bruce Whittaker <bwhittak@xxxxxxxxxxxxx> wrote:
> On 2004.06.09 22:47 Bruce Whittaker wrote:
> >> Hi all,
> >>
> >> I'm looking at converting my faxing so that I use
> Class1 instead of
> >> Class2
> >> and I'm having a little issue where every second
> fax fails - returning
> >> a
> >> "No local dialtone" message. The next attempt
> works.
> >>
>
>
>
> >You seem to be indicating that the modem is wrong,
> that there is
> >dialtone when it's reporting that there is not.
> Are you certain the
> >modem is wrong?
>
> >Are these lines coming from a PBX?
>
> >Lee.
>
> Hi Lee - Pedros this answer is to you both as you
> are both on the same
> track,
>
> I am indicating that the modem is wrong because this
> issue was non
> existant with a Class2 setup. It was only once I
> converted to Class1 that
> this issue arose.
>

No clue here, Class2 uses a different modulation?...

> We are behind a pabx, but the number I have been
> dialing is an internal
> number so there should not really be any
> interference from the PABX (again
> - it works fine with Class 2). As an example of what
> I mean about every
> second fax attempt failing,

You mean, every 2nd fax succeeds :-). Well, I wonder
if you get a different line when hylafax started the
second call. Do you have access to the PBX logs? Are
you able to track the calling sessions at the PBX?




__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



*******************************************************************
eSafe scanned this email for viruses, vandals and malicious content
*******************************************************************