Re: [hylafax-users] GVC Fax 14400 V.42bis/MNP5 Modem Problem with Hylafax

[Heribert Schorn <h.schorn@xxxxxx>]

Hallo Lee ,

thank you for your hint. 

On Sun, 13 Jun 2004 09:56:26 -0700
Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:

> On 2004.06.13 09:32 Heribert Schorn wrote:
> 
> > ModemDialCmd:		ATX3DT%s@		# T for tone
> > dialing, @ for silence
> 
> > Jun 13 18:06:11.22: [ 7741]: <-- [10:ATX3DT##################@\r]
> > Jun 13 18:07:14.77: [ 7741]: --> [9:NO ANSWER]
> 
> Maybe try:
> 
> ModemDialCmd: ATDT%s
> 
> Lee.
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 


But it dosn't work . 
Now i get in the log :

.....
Jun 13 19:52:21.87: [ 9227]: DIAL XXXXXXXXXX
Jun 13 19:52:21.87: [ 9227]: <-- [7:ATDTXXXXXXX\r]
Jun 13 19:52:28.38: [ 9227]: --> [3:CED]
Jun 13 19:52:33.76: [ 9227]: --> [5:+FCON]
Jun 13 19:52:33.76: [ 9227]: --> [40:+FNSF: 00 00 56 55 55 00 80 B0 80 00 00 ]
Jun 13 19:52:33.76: [ 9227]: REMOTE NSF " 00 00 56 55 55 00 80 B0 80 00 00"
Jun 13 19:52:33.76: [ 9227]: NSF remote fax equipment: Brother
Jun 13 19:52:33.76: [ 9227]: --> [29:+FCSI: "     +49 2224 90XXXXXXX"]
Jun 13 19:52:33.76: [ 9227]: REMOTE CSI "+49 2224 90XXXXXX"
Jun 13 19:52:33.76: [ 9227]: --> [22:+FDIS: 1,3,0,2,0,0,0,3]
Jun 13 19:52:33.76: [ 9227]: --> [2:OK]
Jun 13 19:52:33.76: [ 9227]: REMOTE best rate 9600 bit/s
Jun 13 19:52:33.76: [ 9227]: REMOTE max page width 1728 pixels in 215 mm
Jun 13 19:52:33.76: [ 9227]: REMOTE max unlimited page length
Jun 13 19:52:33.76: [ 9227]: REMOTE best vres 7.7 line/mm
Jun 13 19:52:33.76: [ 9227]: REMOTE best format 1-D MR
Jun 13 19:52:33.76: [ 9227]: REMOTE best 10 ms/scanline
Jun 13 19:52:33.76: [ 9227]: USE 9600 bit/s
Jun 13 19:52:33.76: [ 9227]: USE 10 ms/scanline
Jun 13 19:52:33.76: [ 9227]: SEND file "docq/doc23.ps;00"
Jun 13 19:52:33.76: [ 9227]: USE page width 1728 pixels in 215 mm
Jun 13 19:52:33.76: [ 9227]: USE unlimited page length
Jun 13 19:52:33.76: [ 9227]: USE 3.85 line/mm
Jun 13 19:52:33.77: [ 9227]: USE 1-D MR
Jun 13 19:52:33.77: [ 9227]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,3\r]
Jun 13 19:52:35.14: [ 9227]: --> [9:+FHNG: 40]
Jun 13 19:52:35.14: [ 9227]: REMOTE HANGUP: Unspecified Transmit Phase C error
(code 40)
Jun 13 19:52:35.14: [ 9227]: --> [2:OK]
Jun 13 19:52:35.14: [ 9227]: <-- [7:AT+FDT\r]
Jun 13 19:52:35.56: [ 9227]: --> [10:NO CARRIER]
Jun 13 19:52:35.56: [ 9227]: MODEM No carrier
Jun 13 19:52:35.56: [ 9227]: SEND: Unspecified Transmit Phase C error; Giving up
after 3 attempts to send same page "docq/doc23.ps;00", dirnum 0
Jun 13 19:52:35.56: [ 9227]: <-- [5:ATH0\r]
Jun 13 19:52:36.26: [ 9227]: --> [2:OK]
Jun 13 19:52:36.26: [ 9227]: SESSION END

What can I do now ?

Thank You very much 
Heribert


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*