Re: [hylafax-users] SEND FAILED: No carrier detected

["Andras Kende" <andras@xxxxxxxxx>]

Ok I added a @ to the dialing command:

ModemDialCmd:	ATDT%s@

No I can send fax to my Panasonic Fax fine, 
but for example if I want to send something to my efax.com number it says:

[16:ATDT13092137339\r] May 01 21:53:08.30: [  857]: --> [10:NO CARRIER]

[17:ATDT13092137339@\r] May 01 21:46:48.26: [  770]: --> [9:NO ANSWER]

Hylafax4.2beta1, FreeBSD current, Multitech ZBA, Class2.0 ...

Is there some other settings?


Thanks,

Andras Kende


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Andras Kende
Sent: Wednesday, April 28, 2004 12:38 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] SEND FAILED: No carrier detected

Hello,

Tried to send a fax, receiver picked then failed to receive......


Your facsimile job to 19723690730 failed because:
    No carrier detected

    ---- Transcript of session follows ----

Apr 28 00:20:36.92: [ 1284]: SESSION BEGIN 00000240 19723690730
Apr 28 00:20:36.92: [ 1284]: HylaFAX (tm) Version 4.1.8
Apr 28 00:20:36.92: [ 1284]: SEND FAX: JOB 3 DEST 19723690730 COMMID
00000240 DEVICE '/dev/cuaa0'
Apr 28 00:20:36.92: [ 1284]: DELAY 75 ms
Apr 28 00:20:37.01: [ 1284]: DELAY 2600 ms
Apr 28 00:20:40.63: [ 1284]: DELAY 10 ms
Apr 28 00:20:40.65: [ 1284]: <-- [4:ATZ\r]
Apr 28 00:20:41.61: [ 1284]: --> [2:OK]
Apr 28 00:20:41.61: [ 1284]: DELAY 3000 ms
Apr 28 00:20:44.62: [ 1284]: <-- [5:ATE0\r]
Apr 28 00:20:44.63: [ 1284]: --> [4:ATE0]
Apr 28 00:20:44.63: [ 1284]: --> [2:OK]
Apr 28 00:20:44.63: [ 1284]: <-- [5:ATV1\r]
Apr 28 00:20:44.64: [ 1284]: --> [2:OK]
Apr 28 00:20:44.64: [ 1284]: <-- [5:ATQ0\r]
Apr 28 00:20:44.65: [ 1284]: --> [2:OK]
Apr 28 00:20:44.65: [ 1284]: <-- [7:ATS0=0\r]
Apr 28 00:20:44.67: [ 1284]: --> [2:OK]
Apr 28 00:20:44.67: [ 1284]: <-- [7:ATS8=2\r]
Apr 28 00:20:44.68: [ 1284]: --> [2:OK]
Apr 28 00:20:44.68: [ 1284]: <-- [8:ATS7=60\r]
Apr 28 00:20:44.70: [ 1284]: --> [2:OK]
Apr 28 00:20:44.70: [ 1284]: <-- [12:AT+FCLASS=1\r]
Apr 28 00:20:44.72: [ 1284]: --> [2:OK]
Apr 28 00:20:44.72: [ 1284]: <-- [5:ATM0\r]
Apr 28 00:20:44.73: [ 1284]: --> [2:OK]
Apr 28 00:20:44.75: [ 1284]: <-- [12:AT+FCLASS=1\r]
Apr 28 00:20:44.86: [ 1284]: --> [2:OK]
Apr 28 00:20:44.86: [ 1284]: DIAL 19723690730
Apr 28 00:20:44.86: [ 1284]: <-- [16:ATDT19723690730\r]
Apr 28 00:21:49.03: [ 1284]: --> [10:NO CARRIER]
Apr 28 00:21:49.03: [ 1284]: SEND FAILED: JOB 3 DEST 19723690730 ERR No
carrier detected
Apr 28 00:21:49.03: [ 1284]: <-- [5:ATH0\r]
Apr 28 00:21:49.16: [ 1284]: --> [2:OK]
Apr 28 00:21:49.16: [ 1284]: SESSION END

    ---- Unsent job status ----

   Destination: 19723690730
         JobID: 3
       GroupID: 3
        Sender: EIS Root
      Mailaddr: root@xxxxxxxxxxxxxxxxxxxxxxx
        CommID: 00000240
Submitted From: localhost.apsrecord.com
    Page Width: 215 (mm)
   Page Length: 279 (mm)
    Resolution: 98 (lpi)
        Status: No carrier detected
       Dialogs: 0 (exchanges with remote device)
         Dials: 2 (consecutive failed calls to destination)
         Calls: 2 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 1 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc3.ps             6843 PostScript



Thanks,

Andras Kende
Andras@xxxxxxxxx




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*





____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*