[hylafax-users] problems with outgoing faxes

[Eric Shibata <eric@xxxxxxxxxxxxxx>]

I'm running hylafax4.1.8-1rph on Fedora Core 1, gcc-3.3.2-1 and
libtiff-3.5.7-14. I am not able to fax to a long distance number, but I can
fax locally under the default configuration(strange...) It comes back with
the "No carrier detected" error message. I tried using different modems and
it still gives me the same error for the long distance faxes. I tried
adding command "ModemDialCmd: ATDT%s@" and it works when I dial to my other
1800 number, but not locally any longer(328-0183 area code 516) and long
distance doesn't work either way (1-856-456-8273). Anything else I should
try? I appreciate in advance!
ERS

####################################
Here is my current config.ttyS0 file
####################################

# $Id: rc32acl-1,v 1.2 2002/04/07 20:29:26 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Configuration for a Rockwell-based Class 1 modem.
#    SupraFAX v.32bis		firmware V1.200-C or newer
# (and others)
#
# This configuration file sets up the modem to run at 38.4
# and use RTS/CTS flow control by default.
#
#
CountryCode:		1
AreaCode:		516
FAXNumber:		"+1 516 775 8260"
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		1
RecvFileMode:		0644
LogFileMode:		0644
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		low
GettyArgs:		"-r -b -s %s %l"
NoCarrierRetrys:	2
PercentGoodLines:	50
MaxRecvPages:		50
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use class 1 interface
ModemRate:		19200
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:	AT&K		# disable flow control cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:	AT&K4		# software flow control cmd
ModemSetupDTRCmd:	AT&D3		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemSetupAACmd:	AT+FAA=0	# in case modem supports Class 2 also
#
ModemMfrQueryCmd:	!Rockwell	# no way to query modem
ModemModelQueryCmd:	!RC32ACL	# not always right
ModemRevQueryCmd:	ATI3


##########################################
Here is an example of a q file from doneq:
##########################################
tts:1081885742
killtime:1081896374
retrytime:0
state:8
npages:0
totpages:1
ntries:0
ndials:1
totdials:1
maxdials:12
tottries:0
maxtries:3
pagewidth:209
resolution:196
pagelength:296
priority:127
schedpri:126
minsp:0
desiredbr:13
desiredst:0
desiredec:1
desireddf:3
desiredtl:0
useccover:1
external:18564568273
number:18564568273
mailaddr:root@xxxxxxxxxxxxxx
sender:root
jobid:149
jobtag:
pagehandling:21Z1f89P
modem:any
receiver:
company:
location:
cover:
client:gawain.kopkefruit.com
owner:root
groupid:149
signalrate:0 bit/s
dataformat:2-D MMR
jobtype:facsimile
tagline:
subaddr:
passwd:
doneop:default
commid:000001877
status:No carrier detected
notify:none
pagechop:default
chopthreshold:3
!postscript:0::docq/doc259.ps


#####################################################
Here is an example of a log file(e-mail notification)
#####################################################

Your facsimile job to 18564568273 failed because:
    No carrier detected

    ---- Transcript of session follows ----

Apr 12 13:02:54.97: [ 4195]: SESSION BEGIN 00001816 18564568273
Apr 12 13:02:54.97: [ 4195]: HylaFAX (tm) Version 4.1.7
Apr 12 13:02:54.97: [ 4195]: SEND FAX: JOB 108 DEST 18564568273 COMMID
00001816 DEVICE '/dev/ttyS0'
Apr 12 13:04:09.46: [ 4195]: SEND FAILED: JOB 108 DEST 18564568273 ERR No
carrier detected
Apr 12 13:04:09.57: [ 4195]: SESSION END

    ---- Unsent job status ----

   Destination: 18564568273
         JobID: 108
       GroupID: 108
        Sender: Eric Shibata
      Mailaddr: eric@xxxxxxxxxxxxxx
        CommID: 00001816
Submitted From: 192.168.253.50
    Page Width: 200 (mm)
   Page Length: 264 (mm)
    Resolution: 98 (lpi)
        Status: No carrier detected
       Dialogs: 0 (exchanges with remote device)
         Dials: 4 (consecutive failed calls to destination)
         Calls: 4 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 2 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc108.cover           0 PostScript cover page
docq/doc198.ps              0 PostScript

Sorry, there was a problem sending notification;
something went wrong in the shell script bin/notify.

_______________________________________________

I appologize for the long mail...  


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*