[hylafax-users] Problems with hylafax 4.1.8 and answering

To: <hylafax-users@xxxxxxxxxxx>
Subject: [hylafax-users] Problems with hylafax 4.1.8 and answering
From: hylafax-users-bounce@xxxxxxxxxxx
Date: Fri, 9 Apr 2004 15:14:38 -0700
Hello,

I got the following setup right now:

RedHat 8 with a Patton 2977 card (ex-Digi DataFire T1/PRI 23/24
channels)
Hylafax 4.1.8

After some fighting with the driver provided (Patton never updated it
since buying it from Digi) I got the card to work and I can send out
faxes fine.

But I got two problems incoming. One is probably not hylafax related but
phone company or hardware related (call number on PRI, it rings, never
stops, even if you hang up. Try to answer it, get NO DIALTONE and it
stops ringing).

But the second problem is something in Hylafax. I got the modems
configured as Class 2:

ModemType:              Class2          # use this to supply a hint
ModemRate:              38400
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3
Class2APQueryCmd:       none            # not available
ModemAnswerCmd:         AT+FCC=,,,,1;A

When I get a call, it sees the RING but immediately does "Ring detected
without successful handshake.":

Apr  9 15:07:12 faxfrmt01 FaxGetty[1307]: OPEN /dev/dg/0/00  HylaFAX
(tm) Version 4.1.8
Apr  9 15:07:12 faxfrmt01 FaxGetty[1307]: Purge stale UUCP lock
/var/lock/LCK..00
Apr  9 15:07:13 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF
Apr  9 15:07:13 faxfrmt01 FaxGetty[1307]: DELAY 75 ms
Apr  9 15:07:13 faxfrmt01 FaxGetty[1307]: MODEM set DTR ON
Apr  9 15:07:13 faxfrmt01 FaxGetty[1307]: DELAY 2600 ms
Apr  9 15:07:17 faxfrmt01 FaxGetty[1307]: MODEM set baud rate: 38400
baud, input flow RTS/CTS, output flow RTS/CTS
Apr  9 15:07:17 faxfrmt01 FaxGetty[1307]: DELAY 10 ms
Apr  9 15:07:17 faxfrmt01 FaxGetty[1307]: MODEM flush i/o
Apr  9 15:07:17 faxfrmt01 FaxGetty[1307]: <-- [4:ATZ\r]
Apr  9 15:07:19 faxfrmt01 FaxGetty[1307]: --> [3:ATZ]
Apr  9 15:07:19 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:19 faxfrmt01 FaxGetty[1307]: DELAY 3000 ms
Apr  9 15:07:22 faxfrmt01 FaxGetty[1307]: <-- [5:ATE0\r]
Apr  9 15:07:22 faxfrmt01 FaxGetty[1307]: --> [4:ATE0]
Apr  9 15:07:22 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:22 faxfrmt01 FaxGetty[1307]: <-- [5:ATV1\r]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [5:ATQ0\r]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [7:ATS0=0\r]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [7:ATS8=2\r]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [8:ATS7=60\r]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [6:AT&K3\r]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=?\r]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [15:0,1,2,2.0,2.1,8]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Data"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 1"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2.0"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2.1"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Voice"
Apr  9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=2\r]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FMFR?\r]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [18:Digi International]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Mfr Digi International
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FMDL?\r]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [15:RAS modem 56000]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FREV?\r]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [19:V80006691_K4-K56_DS]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Model RAS modem 56000
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Revision
V80006691_K4-K56_DS
Apr  9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FDCC=?\r]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: -->
[45:(0-1),(0-5),(0-4),(0-2),(0-3),(0-2),(0),(0-7)]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 3.85 line/mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 7.7 line/mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2400 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 4800 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 7200 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 9600 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 12000 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 14400 bit/s
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 1728
pixels in 215 mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 2048
pixels in 255 mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 2432
pixels in 303 mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 1216
pixels in 151 mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 864
pixels in 107 mm
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports A4 page length
(297 mm)
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports B4 page length
(364 mm)
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports unlimited page
length
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 1-D MR
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D MR
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D
Uncompressed Mode
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D MMR
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports no ECM
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports T.30 Annex A,
ECM
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 0 ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 5 ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 10 ms, 5
ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 10 ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 20 ms, 10
ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 20 ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 40 ms, 20
ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 40 ms/scanline
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FCQ=?\r]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [3:0-2]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 1D+2D copy
quality checking (but not enabled)
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FSPL=?\r]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [3:0-1]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=2\r]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FTBC=0\r]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FBOR=0\r]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [13:AT+FPHCTO=30\r]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: <--
[24:AT+FDCC=1,5,2,2,3,1,0,0\r]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: MODEM DIGI INTERNATIONAL RAS
modem 56000/V80006691_K4-K56_DS
Apr  9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [5:ATM0\r]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FCR=1\r]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: <--
[31:AT+FLID="Autotradecenter Inc."\r]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: STATE CHANGE: BASE -> RUNNING
(timeout 30)
Apr  9 15:07:28 faxfrmt01 FaxGetty[1307]: MODEM input buffering disabled


Here comes the call:

Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: STATE CHANGE: RUNNING ->
LISTENING
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM input buffering enabled
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: --> [4:RING]
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: STATE CHANGE: LISTENING ->
ANSWERING
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM input buffering enabled
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: ANSWER: Ring detected without
successful handshake
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: <-- [5:ATH0\r]
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: servertracing = 32767 (line
19)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: sessiontracing = 11 (line 20)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: recvfilemode = 0600 (line 21)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: logfilemode = 0600 (line 22)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: devicemode = 0600 (line 23)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: ringsbeforeanswer = 1 (line
24)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: speakervolume = off (line 25)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: gettyargs = -h %l dx_%s (line
26)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: localidentifier =
Autotradecenter Inc. (line 27)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: logfacility = local1 (line 28)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: taglinefont = etc/lutRS18.pcf
(line 29)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: taglineformat = From
%%l|%c|Page %%P of %%T (line 30)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: maxrecvpages = 25 (line 31)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemtype = Class2 (line 34)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemrate = 38400 (line 35)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemflowcontrol = rtscts
(line 36)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemnoflowcmd = AT&K0 (line
37)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemsoftflowcmd = AT&K4 (line
38)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemhardflowcmd = AT&K3 (line
39)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: class2apquerycmd = none (line
41)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: qualifycid = etc/cid (line 44)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemresetcmds = AT#CID=1
(line 45)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: cidnumber = NMBR= (line 46)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: cidname = NAME= (line 47)
Apr  9 15:12:51 faxfrmt01 FaxGetty[1307]: modemanswercmd =
AT+FCC=,,,,1;A (line 50)
Apr  9 15:12:52 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF
Apr  9 15:12:52 faxfrmt01 FaxGetty[1307]: DELAY 75 ms
Apr  9 15:12:53 faxfrmt01 FaxGetty[1307]: MODEM set DTR ON
Apr  9 15:12:53 faxfrmt01 FaxGetty[1307]: DELAY 2600 ms
Apr  9 15:12:56 faxfrmt01 FaxGetty[1307]: MODEM set baud rate: 38400
baud, input flow RTS/CTS, output flow RTS/CTS
Apr  9 15:12:56 faxfrmt01 FaxGetty[1307]: DELAY 10 ms
Apr  9 15:12:56 faxfrmt01 FaxGetty[1307]: MODEM flush i/o
Apr  9 15:12:56 faxfrmt01 FaxGetty[1307]: <-- [4:ATZ\r]
Apr  9 15:12:59 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:12:59 faxfrmt01 FaxGetty[1307]: DELAY 3000 ms
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [9:AT#CID=1\r]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [8:AT#CID=1]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATE0\r]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [4:ATE0]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATV1\r]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATQ0\r]
Apr  9 15:13:03 faxfrmt01 FaxGetty[1307]: --> [2:OK]
Apr  9 15:13:03 faxfrmt01 FaxGetty[1307]: <-- [7:ATS0=0\r]

Any tips whats wrong that it doesn't answer ?

Regards, Ulf.




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Prev by Date: Re: [hylafax-users] Seeking clarification on installing hylafax.
Next by Date: [hylafax-users] possibly OT - configuring router to support hylafax data connection.
Previous by thread: Re: [hylafax-users] Problems with hylafax 4.1.8 and answering
Next by thread: [hylafax-users] How do I set the maximum number of faxes in queue?
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services