[hylafax-users] 100% bad lines when receiving fax

[Stefano Biella <sbiella@xxxxxxxxx>]

Hi all,

I've some problem when I try to receive a fax with Hylafax, It's seem 
that the received fax always contains 100% bad lines.

Sending fax works fine.

I've made several tests, I've tried, class1, class1.0 and class2 
configurations, with hardware and software flow control. The problem 
seem not modem's related because I tried 3 different modem, a "56K 
Hamlet", and 2 USR Sportster.

The machine is a FreeBSD 4.9-RELEASE-p2 with hylafax-4.1.8 and 
tiff-3.6.1 installed from ports.

Someone have any ideas why I'm unable to receive?

Here the log:

An attempt to receive facsimile on cuaa1 failed because:

    Normal and proper end of connection

    ---- Transcript of session follows ----

Mar 02 11:19:52.81: [32960]: SESSION BEGIN 00000054 390229406377
Mar 02 11:19:52.81: [32960]: HylaFAX (tm) Version 4.1.8
Mar 02 11:19:52.81: [32960]: <-- [4:ATA\r]
Mar 02 11:20:01.71: [32960]: --> [5:+FCON]
Mar 02 11:20:01.73: [32960]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuaa1'
Mar 02 11:20:01.76: [32960]: RECV FAX: begin
Mar 02 11:20:03.34: [32960]: --> [29:+FTSI: "       39 2 29401116"]
Mar 02 11:20:03.34: [32960]: REMOTE TSI "39 2 29401116"
Mar 02 11:20:03.64: [32960]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
Mar 02 11:20:03.64: [32960]: REMOTE wants 9600 bit/s
Mar 02 11:20:03.64: [32960]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 11:20:03.64: [32960]: REMOTE wants unlimited page length
Mar 02 11:20:03.64: [32960]: REMOTE wants 3.85 line/mm
Mar 02 11:20:03.64: [32960]: REMOTE wants 1-D MR
Mar 02 11:20:03.75: [32960]: --> [2:OK]
Mar 02 11:20:03.75: [32960]: <-- [7:AT+FDR\r]
Mar 02 11:20:05.31: [32960]: --> [5:+FCFR]
Mar 02 11:20:07.24: [32960]: --> [22:+FDCS: 0,3,0,2,0,0,0,3]
Mar 02 11:20:07.24: [32960]: REMOTE wants 9600 bit/s
Mar 02 11:20:07.24: [32960]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 11:20:07.24: [32960]: REMOTE wants unlimited page length
Mar 02 11:20:07.24: [32960]: REMOTE wants 3.85 line/mm
Mar 02 11:20:07.24: [32960]: REMOTE wants 1-D MR
Mar 02 11:20:07.24: [32960]: --> [7:CONNECT]
Mar 02 11:20:07.24: [32960]: RECV: begin page
Mar 02 11:20:07.24: [32960]: RECV: send trigger 021
Mar 02 11:20:41.86: [32960]: RECV: 255 total lines, 255 bad lines, 0 
consecutive bad lines
Mar 02 11:20:41.86: [32960]: --> [20:+FPTS: 1,1154,1154,0]
Mar 02 11:20:43.15: [32960]: --> [7:+FET: 2]
Mar 02 11:20:43.15: [32960]: RECV recv EOP (no more pages or documents)
Mar 02 11:20:43.26: [32960]: --> [2:OK]
Mar 02 11:20:43.26: [32960]: RECV: REJECT page quality, 0% good lines 
(95% required)
Mar 02 11:20:43.26: [32960]: RECV send RTN (retrain negative)
Mar 02 11:20:43.26: [32960]: <-- [10:AT+FPTS=2\r]
Mar 02 11:20:43.38: [32960]: --> [2:OK]
Mar 02 11:20:43.38: [32960]: <-- [7:AT+FDR\r]
Mar 02 11:20:46.27: [32960]: --> [8:+FHNG: 0]
Mar 02 11:20:46.27: [32960]: REMOTE HANGUP: Normal and proper end of 
connection (code 0)
Mar 02 11:20:46.27: [32960]: RECV FAX (00000054): recvq/fax00031.tif 
from 39 2 29401116, route to <unspecified>, 0 pages in 0:45
Mar 02 11:20:46.27: [32960]: RECV FAX: Normal and proper end of connection
Mar 02 11:20:46.27: [32960]: RECV FAX (00000054): session with 39 2 
29401116 terminated abnormally: Normal and proper end of connection
Mar 02 11:20:46.27: [32960]: RECV FAX: bin/faxrcvd "recvq/fax00031.tif" 
"cuaa1" "00000054" "Normal and proper end of connection" "" ""


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*