Re: [hylafax-users] USR Faxing problem

["Stephen Davey" <stephend@xxxxxxxxxxxxxx>]

Hi Lee,

Thank you for the reply.

You where spot on, when I send a fax with sendfax it works fine, now my
problem is how to workout what is wrong with the client as it says every
thing was sent ok.

I have install both the following programs and both send faxes to Hylafax
and neither report any errors, then hylafax attempts to send the fax.

WinprintHylaFAX.exe
hylafaxmanager-093-setup.exe

Regards
Stephen Davey



> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Lee Howard
> Sent: Sunday, 29 February 2004 3:23 AM
> To: Stephen Davey
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: [news] Re: [hylafax-users] USR Faxing problem
>
>
> On 2004.02.28 00:24 Stephen Davey wrote:
>
> > Feb 28 14:12:00.00: [11331]: REMOTE best rate 2400 bit/s
> > Feb 28 14:12:00.00: [11331]: REMOTE max page width 1728 pixels in 215
> > mm
> > Feb 28 14:12:00.00: [11331]: REMOTE max unlimited page length
> > Feb 28 14:12:00.01: [11331]: REMOTE best vres 7.7 line/mm
> > Feb 28 14:12:00.01: [11331]: REMOTE best format 2-D MR
> > Feb 28 14:12:00.01: [11331]: REMOTE best 0 ms/scanline
> > Feb 28 14:12:00.01: [11331]: USE 2400 bit/s
> > Feb 28 14:12:00.01: [11331]: USE 0 ms/scanline
> > Feb 28 14:12:00.01: [11331]: <-- [9:AT+FTH=3\r]
> > Feb 28 14:12:00.20: [11331]: --> [7:CONNECT]
> > Feb 28 14:12:00.20: [11331]: <-- data [3]
> > Feb 28 14:12:00.20: [11331]: <-- data [2]
> > Feb 28 14:12:01.38: [11331]: --> [2:OK]
> > Feb 28 14:12:01.38: [11331]: <-- [5:ATH0\r]
> > Feb 28 14:12:01.62: [11331]: --> [2:OK]
> > Feb 28 14:12:01.63: [11331]: SESSION END
>
> This doesn't have anything to do with the modem.  It happens because
> there are no faxable documents associated with this job.
>
> Likely something is wrong with your client program or client program
> configuration.
>
> Try faxing from the 'sendfax' command.
>
> Furthermore, I really don't think that a fax machine would "at best"
> support 2400 baud.  Any chance I can get you to re-create this log with
> SessionTracing set to 0xFFF ?  Something probably went wrong in the
> parsing of the remote's DIS signal.
>
> Thanks.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*