Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Phase D error only on certain Tiffs



Sending certain tiffs (actually those generated from the sendfax client
or from a WHFC) from one of the digi modems to another digi modem on the
same card always produces a phase D error.  The send and receive logs
below.

But sending a tiff that was generated by a client like ifax's HylaFSP is
transmitted just fine between the same two modems.

Any ideas?  Why just these types of generated tiffs squawk with this
error?  BTW, the first page does come through ok.  But not any other
pages as you can see the hangup.

I did send this same tiff from an old practical peripherals modem in
class 1 to one of these digi modems with no problems at all.

Latest CVS Head is running.  Libtiff 3.5.7 and Ghostscript 7.05.20.

Send log
--------
Feb 19 20:30:34.48: [17874]: SESSION BEGIN 00005692 3721 Feb 19
20:30:34.48: [17874]: HylaFAX (tm) Version 4.1.6 Feb 19 20:30:34.48:
[17874]: SEND FAX: JOB 2717 DEST 3721 COMMID 00005692 DEVICE
'/dev/ttyG003' Feb 19 20:30:34.48: [17874]: STATE CHANGE: RUNNING ->
SENDING Feb 19 20:30:34.48: [17874]: MODEM input buffering enabled Feb
19 20:30:34.48: [17874]: Apply DialString rules to "3721" Feb 19
20:30:34.48: [17874]: --> match rule "^[2-9]......$", result now "3721"
Feb 19 20:30:34.48: [17874]: --> match rule "^1513([0-9])", result now
"3721" Feb 19 20:30:34.48: [17874]: --> return result "3721" Feb 19
20:30:34.48: [17874]: <-- [14:AT+FCLASS=2.0\r] Feb 19 20:30:34.74:
[17874]: --> [2:OK] Feb 19 20:30:34.74: [17874]: <-- [9:AT+FLO=2\r] Feb
19 20:30:35.00: [17874]: --> [2:OK] Feb 19 20:30:35.00: [17874]: <--
[9:AT+FPP=0\r] Feb 19 20:30:35.26: [17874]: --> [2:OK] Feb 19
20:30:35.26: [17874]: <-- [9:AT+FBO=0\r] Feb 19 20:30:35.52: [17874]:
--> [2:OK] Feb 19 20:30:35.52: [17874]: <-- [10:AT+FCT=30\r] Feb 19
20:30:35.78: [17874]: --> [2:OK] Feb 19 20:30:35.78: [17874]: <--
[11:AT+FCQ=0,0\r] Feb 19 20:30:36.05: [17874]: --> [2:OK] Feb 19
20:30:36.05: [17874]: <-- [15:AT+FNR=1,1,1,1\r] Feb 19 20:30:36.31:
[17874]: --> [2:OK] Feb 19 20:30:36.31: [17874]: <-- [13:AT+FAP=1,1,1\r]
Feb 19 20:30:36.57: [17874]: --> [2:OK] Feb 19 20:30:36.57: [17874]: <--
[9:AT+FIE=0\r] Feb 19 20:30:36.83: [17874]: --> [2:OK] Feb 19
20:30:36.83: [17874]: <-- [9:AT+FBU=1\r] Feb 19 20:30:37.09: [17874]:
--> [2:OK] Feb 19 20:30:37.09: [17874]: <--
[23:AT+FCC=1,5,2,2,3,1,0,0\r] Feb 19 20:30:37.38: [17874]: --> [2:OK]
Feb 19 20:30:37.38: [17874]: <-- [16:AT+FLI="IMPACT"\r] Feb 19
20:30:37.64: [17874]: --> [2:OK] Feb 19 20:30:37.64: [17874]: DIAL 3721
Feb 19 20:30:37.64: [17874]: <-- [12:ATDT3721\r] Feb 19 20:30:47.53:
[17874]: --> [4:+FCO] Feb 19 20:30:49.12: [17874]: --> [74:+FHR: FF 03
40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 54 43 41 50 4D 49] Feb 19
20:30:49.42: [17874]: --> [26:+FHR: FF 13 80 00 EE FA 04]
Feb 19 20:30:49.42: [17874]: --> [27:+FCI:"IMPACT              "]
Feb 19 20:30:49.42: [17874]: REMOTE CSI "IMPACT"
Feb 19 20:30:49.42: [17874]: --> [20:+FIS:1,5,2,2,1,1,0,0]
Feb 19 20:30:49.42: [17874]: --> [2:OK]
Feb 19 20:30:49.42: [17874]: REMOTE best rate 14400 bit/s
Feb 19 20:30:49.42: [17874]: REMOTE max A3 page width (303 mm) Feb 19
20:30:49.42: [17874]: REMOTE max unlimited page length Feb 19
20:30:49.42: [17874]: REMOTE best vres 7.7 line/mm Feb 19 20:30:49.42:
[17874]: REMOTE best format 2-D MR Feb 19 20:30:49.42: [17874]: REMOTE
supports T.30 Annex A, ECM Feb 19 20:30:49.42: [17874]: REMOTE best 0
ms/scanline Feb 19 20:30:49.42: [17874]: USE 14400 bit/s Feb 19
20:30:49.42: [17874]: USE error correction mode Feb 19 20:30:49.42:
[17874]: USE 0 ms/scanline Feb 19 20:30:49.42: [17874]: SEND file
"docq/doc2719.tif;70" Feb 19 20:30:49.42: [17874]: USE A4 page width
(215 mm) Feb 19 20:30:49.42: [17874]: USE unlimited page length Feb 19
20:30:49.42: [17874]: USE 3.85 line/mm Feb 19 20:30:49.42: [17874]: USE
2-D MR Feb 19 20:30:49.42: [17874]: <-- [23:AT+FIS=0,5,0,2,1,1,0,0\r]
Feb 19 20:30:49.70: [17874]: --> [2:OK] Feb 19 20:30:49.70: [17874]: <--
[7:AT+FDT\r] Feb 19 20:30:51.58: [17874]: --> [74:+FHT: FF 03 43 20 20
20 20 20 20 20 20 20 20 20 20 20 20 54 43 41 50 4D 49] Feb 19
20:30:51.84: [17874]: --> [26:+FHT: FF 13 83 00 A2 F8 04] Feb 19
20:30:56.71: [17874]: --> [14:+FHR: FF 13 84] Feb 19 20:30:56.71:
[17874]: --> [20:+FCS:0,5,0,2,1,1,0,0] Feb 19 20:30:56.71: [17874]: -->
[7:CONNECT] Feb 19 20:30:56.71: [17874]: SEND begin page Feb 19
20:30:59.25: [17874]: SENT 20867 bytes of data Feb 19 20:30:59.25:
[17874]: SEND end page Feb 19 20:30:59.25: [17874]: SEND send MPS (more
pages, same document) Feb 19 20:31:11.75: [17874]: --> [26:+FHT: FF 13
BF 4F 00 00 56] Feb 19 20:31:13.46: [17874]: --> [14:+FHR: FF 13 8C] Feb
19 20:31:13.46: [17874]: --> [2:OK] Feb 19 20:31:13.46: [17874]: <--
[8:AT+FPS?\r] Feb 19 20:31:13.72: [17874]: --> [1:1] Feb 19 20:31:13.72:
[17874]: --> [2:OK] Feb 19 20:31:13.72: [17874]: SEND recv MCF (message
confirmation) Feb 19 20:31:13.72: [17874]: SEND FAX (00005692): FROM
root TO 3721 (page 1 of 12 sent in 0:24)


Receive Log
-----------
Feb 19 20:30:43.06: [17856]: SESSION BEGIN 00005693 3721 Feb 19
20:30:43.06: [17856]: HylaFAX (tm) Version 4.1.6 Feb 19 20:30:43.06:
[17856]: <-- [15:AT+FCC=,,,,1;A\r] Feb 19 20:30:43.06: [17856]: -->
[11:NMBR=<NONE>] Feb 19 20:30:48.94: [17856]: --> [74:+FHT: FF 03 40 20
20 20 20 20 20 20 20 20 20 20 20 20 20 54 43 41 50 4D 49] Feb 19
20:30:49.22: [17856]: --> [26:+FHT: FF 13 80 00 EE FA 04] Feb 19
20:30:50.15: [17856]: --> [4:+FCO] Feb 19 20:30:50.15: [17856]: ANSWER:
FAX CONNECTION  DEVICE '/dev/ttyG000' Feb 19 20:30:50.15: [17856]: STATE
CHANGE: ANSWERING -> RECEIVING Feb 19 20:30:50.15: [17856]: MODEM input
buffering enabled Feb 19 20:30:50.15: [17856]: RECV FAX: begin Feb 19
20:30:51.74: [17856]: --> [74:+FHR: FF 03 43 20 20 20 20 20 20 20 20 20
20 20 20 20 20 54 43 41 50 4D 49] Feb 19 20:30:52.04: [17856]: -->
[26:+FHR: FF 13 83 00 A2 F8 04]
Feb 19 20:30:52.04: [17856]: --> [27:+FTI:"IMPACT              "]
Feb 19 20:30:52.04: [17856]: REMOTE TSI "IMPACT"
Feb 19 20:30:52.04: [17856]: --> [20:+FCS:0,5,0,2,1,1,0,0]
Feb 19 20:30:52.04: [17856]: REMOTE wants 14400 bit/s
Feb 19 20:30:52.04: [17856]: REMOTE wants A4 page width (215 mm) Feb 19
20:30:52.04: [17856]: REMOTE wants unlimited page length Feb 19
20:30:52.04: [17856]: REMOTE wants 3.85 line/mm Feb 19 20:30:52.04:
[17856]: REMOTE wants 2-D MR Feb 19 20:30:52.04: [17856]: REMOTE wants
T.30 Annex A, ECM Feb 19 20:30:52.04: [17856]: --> [2:OK] Feb 19
20:30:52.04: [17856]: <-- [7:AT+FDR\r] Feb 19 20:30:56.53: [17856]: -->
[14:+FHT: FF 13 84] Feb 19 20:30:57.38: [17856]: -->
[20:+FCS:0,5,0,2,1,1,0,0] Feb 19 20:30:57.38: [17856]: REMOTE wants
14400 bit/s Feb 19 20:30:57.38: [17856]: REMOTE wants A4 page width (215
mm) Feb 19 20:30:57.38: [17856]: REMOTE wants unlimited page length Feb
19 20:30:57.38: [17856]: REMOTE wants 3.85 line/mm Feb 19 20:30:57.38:
[17856]: REMOTE wants 2-D MR Feb 19 20:30:57.38: [17856]: REMOTE wants
T.30 Annex A, ECM Feb 19 20:30:57.38: [17856]: --> [7:CONNECT] Feb 19
20:30:57.38: [17856]: RECV: begin page Feb 19 20:30:57.38: [17856]:
RECV: send trigger 022 Feb 19 20:30:57.38: [17856]: Copy quality
checking performed by host Feb 19 20:31:11.95: [17856]: RECV: 20955
bytes of data, 1099 total lines Feb 19 20:31:11.95: [17856]: -->
[26:+FHR: FF 13 BF 4F 00 00 56] Feb 19 20:31:11.95: [17856]: -->
[17:+FPS:1,1099,0,0,0] Feb 19 20:31:11.95: [17856]: --> [6:+FET:0] Feb
19 20:31:11.95: [17856]: RECV recv MPS (more pages, same document) Feb
19 20:31:11.95: [17856]: --> [2:OK] Feb 19 20:31:11.95: [17856]: RECV
send MCF (message confirmation) Feb 19 20:31:11.95: [17856]: RECV FAX
(00005693): from IMPACT, page 1 in 0:19, INF, 3.85 line/mm, 2-D MR,
14400 bit/s Feb 19 20:31:11.95: [17856]: <-- [7:AT+FDR\r] Feb 19
20:31:13.28: [17856]: --> [14:+FHT: FF 13 8C] Feb 19 20:31:21.76:
[17856]: --> [7:+FHS:A0] Feb 19 20:31:21.76: [17856]: REMOTE HANGUP:
Unspecified Phase D error (code A0) Feb 19 20:31:21.76: [17856]: RECV
FAX (00005693): recvq/fax01618.tif from IMPACT, route to <unspecified>,
1 pages in 0:31 Feb 19 20:31:21.76: [17856]: RECV FAX: Unspecified Phase
D error Feb 19 20:31:21.76: [17856]: RECV FAX (00005693): session with
IMPACT terminated abnormally: Unspecified Phase D error Feb 19
20:31:21.76: [17856]: RECV FAX: etc/faxrcvd.custom "recvq/fax01618.tif"
"ttyG000" "00005693" "Unspecified Phase D error" "3721" "" Feb 19
20:31:21.76: [17856]: RECV FAX: end Feb 19 20:31:21.76: [17856]: SESSION
END




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services