|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Tiff2fax bug?
Hello all,
I'm using Hylafax 4.1.6 on Mandrake 9.2 (installed from rpm on Mandrake
CD). The fax server is used to send and receive faxes. I'm using old
USRobotics Courier V.Everything modem.
The problem is that the system can receive faxes, but then a fax is
longer than 2 pages, it refuses to receive the second page. Can some one
help me in solving this problem? The sesion log is:
Dec 22 14:26:05.98: [ 1495]: SESSION BEGIN 00000033 37052723704
Dec 22 14:26:05.98: [ 1495]: HylaFAX (tm) Version 4.1.6
Dec 22 14:26:05.98: [ 1495]: <-- [4:ATA\r]
Dec 22 14:26:11.35: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:11.35: [ 1495]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Dec 22 14:26:11.36: [ 1495]: RECV FAX: begin
Dec 22 14:26:11.43: [ 1495]: <-- data [23]
Dec 22 14:26:11.43: [ 1495]: <-- data [2]
Dec 22 14:26:12.99: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:12.99: [ 1495]: <-- data [10]
Dec 22 14:26:12.99: [ 1495]: <-- data [2]
Dec 22 14:26:13.81: [ 1495]: --> [2:OK]
Dec 22 14:26:13.81: [ 1495]: <-- [9:AT+FRH=3\r]
Dec 22 14:26:15.00: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:15.67: [ 1495]: --> [2:OK]
Dec 22 14:26:15.67: [ 1495]: REMOTE TSI ""
Dec 22 14:26:15.67: [ 1495]: <-- [9:AT+FRH=3\r]
Dec 22 14:26:15.73: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:15.97: [ 1495]: --> [2:OK]
Dec 22 14:26:15.97: [ 1495]: REMOTE wants 14400 bit/s
Dec 22 14:26:15.97: [ 1495]: REMOTE wants page width 1728 pixels in 215
mm
Dec 22 14:26:15.97: [ 1495]: REMOTE wants unlimited page length
Dec 22 14:26:15.97: [ 1495]: REMOTE wants 3.85 line/mm
Dec 22 14:26:15.98: [ 1495]: REMOTE wants 2-D MR
Dec 22 14:26:15.98: [ 1495]: RECV training at v.17 14400 bit/s
Dec 22 14:26:15.98: [ 1495]: <-- [11:AT+FRM=145\r]
Dec 22 14:26:17.72: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:19.34: [ 1495]: RECV: TCF 2916 bytes, 4% non-zero, 2776
zero-run
Dec 22 14:26:19.36: [ 1495]: --> [10:NO CARRIER]
Dec 22 14:26:19.36: [ 1495]: DELAY 75 ms
Dec 22 14:26:19.44: [ 1495]: TRAINING succeeded
Dec 22 14:26:19.44: [ 1495]: <-- [9:AT+FTH=3\r]
Dec 22 14:26:19.56: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:19.56: [ 1495]: <-- data [3]
Dec 22 14:26:19.56: [ 1495]: <-- data [2]
Dec 22 14:26:20.78: [ 1495]: --> [2:OK]
Dec 22 14:26:20.78: [ 1495]: <-- [11:AT+FRM=146\r]
Dec 22 14:26:21.73: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:21.73: [ 1495]: RECV: begin page
Dec 22 14:26:34.46: [ 1495]: RECV: 1163 total lines, 0 bad lines, 0
consecutive bad lines
Dec 22 14:26:34.47: [ 1495]: RECV: end page
Dec 22 14:26:34.47: [ 1495]: --> [10:NO CARRIER]
Dec 22 14:26:34.47: [ 1495]: <-- [9:AT+FRH=3\r]
Dec 22 14:26:35.45: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:35.58: [ 1495]: --> [2:OK]
Dec 22 14:26:35.58: [ 1495]: RECV recv MPS (more pages, same document)
Dec 22 14:26:35.58: [ 1495]: <-- [9:AT+FRS=7\r]
Dec 22 14:26:35.74: [ 1495]: --> [2:OK]
Dec 22 14:26:35.74: [ 1495]: <-- [9:AT+FTH=3\r]
Dec 22 14:26:35.86: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:35.86: [ 1495]: RECV send MCF (message confirmation)
Dec 22 14:26:35.87: [ 1495]: RECV FAX (00000033): from , page 1 in 0:16,
INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Dec 22 14:26:35.87: [ 1495]: <-- data [3]
Dec 22 14:26:35.87: [ 1495]: <-- data [2]
Dec 22 14:26:37.08: [ 1495]: --> [2:OK]
Dec 22 14:26:37.08: [ 1495]: <-- [11:AT+FRM=146\r]
Dec 22 14:26:38.02: [ 1495]: --> [7:CONNECT]
Dec 22 14:26:38.02: [ 1495]: RECV: begin page
Dec 22 14:27:09.30: [ 1495]: RECV: 153 total lines, 114 bad lines, 18
consecutive bad lines
Dec 22 14:27:09.30: [ 1495]: RECV: REJECT page quality, 25% good lines
(80% required)
Dec 22 14:27:09.30: [ 1495]: RECV: end page
Dec 22 14:27:09.31: [ 1495]: --> [10:NO CARRIER]
Dec 22 14:27:09.31: [ 1495]: <-- [9:AT+FRH=3\r]
Dec 22 14:27:10.29: [ 1495]: --> [7:CONNECT]
Dec 22 14:27:10.42: [ 1495]: --> [2:OK]
Dec 22 14:27:10.42: [ 1495]: RECV recv EOP (no more pages or documents)
Dec 22 14:27:10.42: [ 1495]: <-- [9:AT+FRS=7\r]
Dec 22 14:27:10.54: [ 1495]: --> [2:OK]
Dec 22 14:27:10.54: [ 1495]: <-- [9:AT+FTH=3\r]
Dec 22 14:27:10.66: [ 1495]: --> [7:CONNECT]
Dec 22 14:27:10.66: [ 1495]: <-- data [3]
Dec 22 14:27:10.66: [ 1495]: <-- data [2]
Dec 22 14:27:11.88: [ 1495]: --> [2:OK]
Dec 22 14:27:11.88: [ 1495]: RECV send RTN (retrain negative)
Dec 22 14:27:11.88: [ 1495]: <-- [9:AT+FRH=3\r]
Dec 22 14:27:13.07: [ 1495]: --> [7:CONNECT]
Dec 22 14:27:13.20: [ 1495]: --> [2:OK]
Dec 22 14:27:13.20: [ 1495]: RECV recv DCN
Dec 22 14:27:13.21: [ 1495]: RECV FAX (00000033): recvq/fax00026.tif
from , route to <unspecified>, 1 pages in 1:02
Dec 22 14:27:13.22: [ 1495]: RECV FAX: COMREC received DCN
Dec 22 14:27:13.22: [ 1495]: <-- [9:AT+FTH=3\r]
Dec 22 14:27:13.33: [ 1495]: --> [7:CONNECT]
Dec 22 14:27:13.33: [ 1495]: <-- data [3]
Dec 22 14:27:13.33: [ 1495]: <-- data [2]
Dec 22 14:27:14.54: [ 1495]: --> [2:OK]
Dec 22 14:27:14.54: [ 1495]: RECV FAX (00000033): session with
terminated abnormally: COMREC received DCN
Dec 22 14:27:14.54: [ 1495]: RECV FAX: bin/faxrcvd "recvq/fax00026.tif"
"ttyS0" "00000033" "COMREC received DCN" "" ""
Dec 22 14:27:15.08: [ 1495]: RECV FAX: end
Dec 22 14:27:15.08: [ 1495]: SESSION END
Thanks
Liutauras
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
