[hylafax-users] T.30 T2 timeout MT1932ZDX

["Bob Meader" <bob@xxxxxxx>]

Hello!
I am running Hylafax 4.1.8 on Redhat 9 with a Multi-Tech MT1932ZDX modem.
The log shows a T.30 T2 timeout on approx 90% on incoming faxes.
I have seen in the archives a note about changing a setting in the firmware
specifically ATS38=35&W . I tried this but when I enter ats38=? to
check if  value the was changed I get back 000 not 35. The log
is the same before and after making the change.


[root@localhost log]# cat c000000015
Dec 17 14:46:00.43: [ 1544]: SESSION BEGIN 000000015 12063652526
Dec 17 14:46:00.43: [ 1544]: HylaFAX (tm) Version 4.1.8
Dec 17 14:46:00.43: [ 1544]: <-- [4:ATA\r]
Dec 17 14:46:09.66: [ 1544]: --> [5:+FCON]
Dec 17 14:46:09.66: [ 1544]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Dec 17 14:46:09.66: [ 1544]: RECV FAX: begin
Dec 17 14:46:14.77: [ 1544]: --> [28:+FTSI:"                    "]
Dec 17 14:46:14.77: [ 1544]: REMOTE TSI ""
Dec 17 14:46:14.77: [ 1544]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
Dec 17 14:46:14.77: [ 1544]: REMOTE wants 14400 bit/s
Dec 17 14:46:14.77: [ 1544]: REMOTE wants page width 1728 pixels in 215 mm
Dec 17 14:46:14.77: [ 1544]: REMOTE wants unlimited page length
Dec 17 14:46:14.77: [ 1544]: REMOTE wants 3.85 line/mm
Dec 17 14:46:14.77: [ 1544]: REMOTE wants 1-D MR
Dec 17 14:46:14.77: [ 1544]: --> [2:OK]
Dec 17 14:46:14.77: [ 1544]: <-- [7:AT+FDR\r]
Dec 17 14:46:16.16: [ 1544]: --> [5:+FCFR]
Dec 17 14:46:16.16: [ 1544]: --> [28:+FTSI:"                    "]
Dec 17 14:46:16.16: [ 1544]: REMOTE TSI ""
Dec 17 14:46:16.16: [ 1544]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
Dec 17 14:46:16.16: [ 1544]: REMOTE wants 14400 bit/s
Dec 17 14:46:16.16: [ 1544]: REMOTE wants page width 1728 pixels in 215 mm
Dec 17 14:46:16.16: [ 1544]: REMOTE wants unlimited page length
Dec 17 14:46:16.16: [ 1544]: REMOTE wants 3.85 line/mm
Dec 17 14:46:16.16: [ 1544]: REMOTE wants 1-D MR
Dec 17 14:46:25.10: [ 1544]: --> [8:+FHNG:73]
Dec 17 14:46:25.10: [ 1544]: REMOTE HANGUP: T.30 T2 timeout, expected page
not r
eceived (code 73)
Dec 17 14:46:25.10: [ 1544]: RECV FAX (000000015): recvq/fax000000006.tif
from ,
 route to <unspecified>, 0 pages in 0:16
Dec 17 14:46:25.10: [ 1544]: RECV FAX: T.30 T2 timeout, expected page not
receiv
ed
Dec 17 14:46:25.10: [ 1544]: RECV FAX (000000015): session with  terminated
abno
rmally: T.30 T2 timeout, expected page not received
Dec 17 14:46:25.10: [ 1544]: RECV FAX: bin/faxrcvd "recvq/fax000000006.tif"
"tty
S0" "000000015" "T.30 T2 timeout, expected page not received" "" ""
Dec 17 14:46:25.37: [ 1544]: RECV FAX: end
Dec 17 14:46:25.37: [ 1544]: SESSION END
[root@localhost log]#


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*