Re: [hylafax-users] 2D-MMR problem

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2003.12.16 11:48 Steven Kurylo wrote:
> I've upgraded my modem to a multitech MT5634ZPX, in class 2,

You probably mean Class 2.0 or Class 2.1, right?

> and I've had great success with it.  However one problem seems to 
> have cropped up; the second time dialing a host Hylafax tried to send 
> the fax in 2D-MMR.  So far each time it has tried to fax a document 
> in 2D-MMR it has failed.  After changing the info file to disable MMR 
> faxes to that host the faxes work fine.  The error I get when trying 
> to send a fax at 2D-MMR is "No response to MPS repeated 3 times".

Have you updated the firmware on the modem?  Some of the older 
(pre-1.28) firmwares for the MT5634s had problems with MMR.

> Unless someone can tell me how to get 2D-MMR to work properly (I do 
> have the logs at 0xFFF), I'm trying to find a setting to force 
> outgoing faxes to not use 2D-MMR.  I see the "RecvDataFormat" but 
> nothing for sending.

Take a look at your modem config file and set ModemDialCmd to be 
AT+FCC=,,,,1;DT%s or something similar.  An example is in the config.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*