Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Problem with mass faxing
Hello group,
I use a AVM C4 with two BRI connections, i.e. 4 B-channels.
Unfortunately, I have encountered some problems with mass faxing:
If I send a mass fax using sendfax and the -z option, all jobs try to be
processed at the same time - since there are only 4 channels to communicate,
the other jobs in the queue are re-queued with error message
"Connection dropped with Reason 0x34AF (Resources unavailable,
unspecified)". After ten minutes, it starts again - all remaining jobs try
to communicate with the modem the same time - the first 4 jobs in the
queue are being processed, the others re-queued (and so on).
Since these impossible tries are counted against the MaxTries value
(=12 tries), a lot of jobs are rejected when using a large mass faxing
recipient file as they reach the MaxTries value.
Is there a way to tell sendfax not to try to send a job unless a prior
job has been fully processed, i.e. the device is ready again ? Or to
set a delay to, let´s say "+ n minutes", between the single send jobs ?
Furthermore, I would like to restrict sending to two B-channels only
(so regardless of the number of send jobs in the queue, receiving
faxes should be possible as two B-channels are always left unused
by sendfax in my configuration).
Unfortunately, the OutgoingController value (set to "1" or to "2" for all
virtual devices) does not work - any ideas on how to enable sending for
specific devices only, e.g. Controller number 1 ?
Thank you for your help !
Christoph
My config.faxCAPI looks as follows:
#
# config file for the AVM C4 ISDN controller
#
SpoolDir: /var/spool/fax
FaxRcvdCmd: /var/spool/fax/bin/faxrcvd
PollRcvdCmd: /var/spool/fax/bin/pollrcvd
FaxReceiveUser: fax
FaxReceiveGroup: dialout
LogTraceLevel: 4
LogFileMode: 0644
LogFile: /var/log/capifax.log
{
# Controller 1, B-Channel 1
HylafaxDeviceName: faxCAPI11
RecvFileMode: 0644
FAXNumber: +1.2.3456789
LocalIdentifier: "company name"
MaxConcurrentRecvs: 1
OutgoingController: 2
OutgoingMSN:
SuppressMSN: 0
NumberPrefix:
UseISDNFaxService: 0
RingingDuration: 0
{
Controller: 1
AcceptSpeech: 1
UseDDI: 1
DDIOffset: "23456789"
DDILength: 4
IncomingDDIs: "1111-9999"
IncomingMSNs:
AcceptGlobalCall: 1
}
}
{
# Controller 1, B-Channel 2
HylafaxDeviceName: faxCAPI12
RecvFileMode: 0644
FAXNumber: +1.2.3456789
LocalIdentifier: "company name"
MaxConcurrentRecvs: 1
OutgoingController: 2
OutgoingMSN:
SuppressMSN: 0
NumberPrefix:
UseISDNFaxService: 0
RingingDuration: 0
{
Controller: 1
AcceptSpeech: 1
UseDDI: 1
DDIOffset: "23456789"
DDILength: 4
IncomingDDIs: "1111-9999"
IncomingMSNs:
AcceptGlobalCall: 1
}
}
{
# Controller 2, B-Channel 1
HylafaxDeviceName: faxCAPI21
RecvFileMode: 0644
FAXNumber: +1.2.3456789
LocalIdentifier: "company name"
MaxConcurrentRecvs: 1
OutgoingController: 2
OutgoingMSN:
SuppressMSN: 0
NumberPrefix:
UseISDNFaxService: 0
RingingDuration: 0
{
Controller: 2
AcceptSpeech: 1
UseDDI: 1
DDIOffset: "23456789"
DDILength: 4
IncomingDDIs: "1111-9999"
IncomingMSNs:
AcceptGlobalCall: 1
}
}
{
# Controller 2, B-Channel 2
HylafaxDeviceName: faxCAPI22
RecvFileMode: 0644
FAXNumber: +1.2.3456789
LocalIdentifier: "company name"
MaxConcurrentRecvs: 1
OutgoingController: 2
OutgoingMSN:
SuppressMSN: 0
NumberPrefix:
UseISDNFaxService: 0
RingingDuration: 0
{
Controller: 2
AcceptSpeech: 1
UseDDI: 1
DDIOffset: "23456789"
DDILength: 4
IncomingDDIs: "1111-9999"
IncomingMSNs:
AcceptGlobalCall: 1
}
}
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*