Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Reverse engineering existing configuration
Quite some time ago, I spent an entire weekend setting up Hylafax on a
FreeBSD to do a large variety of stuff, inbound/outbound fax,
inbound.outbound data, inbound.outbound ppp .... You get the idea, quite a
complex configuration.
I built i from the FreeBSD ports collection. Unfortunately I did not keep
notes on what options I passed to the port when I built it. I had a TO-DO
item to go back and figure this out, and store the information in the ports
build file, but in the meantime I had marked that port as hold.
Unfortunately, I lost the root drive on that machine last week. Now this
isn't as big a disaster as it could be as I have complete Amanda backups.
However, rather than just restoring the disk, I decided to rebuild the
system from scratch looking at existing configuration info pulled off the
tapes.
So, I seem to recall that their is a common place where all the Hylafax
build time options are stored, somewhere in /usr/local/spool/Hylafax? Can
someone give me some guidance on the best way to recover this configuration
information?
--
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
-- Benjamin Franklin
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*