[hylafax-users] FRH=3 -> timeout waiting for v.21 carrier

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] FRH=3 -> timeout waiting for v.21 carrier
From: Giulio Orsero <giulioo@xxxxxxxxx>
Date: Wed, 10 Dec 2003 10:48:04 +0100
4.1.7, rh6x, courier v.34 in class1.

Sending to some destinations always result in training failed.
Before trying changing line/modem I'm sending log here.

I tried using -B 4800, Class1ResponseWaitCmd="AT+FRS=1" (2, 3, ), using
hardware flow in place of soft to no avail.

Log is attached inline.

Thanks.

Dec 10 09:53:54.94: [17213]: SESSION BEGIN 00016663 39000000000
Dec 10 09:53:54.94: [17213]: HylaFAX (tm) Version 4.1.7
Dec 10 09:53:54.94: [17213]: MODEM set DTR OFF
Dec 10 09:53:54.94: [17213]: DELAY 75 ms
Dec 10 09:53:55.01: [17213]: MODEM set DTR ON
Dec 10 09:53:55.01: [17213]: DELAY 2600 ms
Dec 10 09:53:58.62: [17213]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Dec 10 09:53:58.62: [17213]: DELAY 10 ms
Dec 10 09:53:58.63: [17213]: MODEM flush i/o
Dec 10 09:53:58.63: [17213]: <-- [4:ATZ\r]
Dec 10 09:53:58.63: [17213]: <-- <3:41 54 5A>
Dec 10 09:53:58.63: [17213]: <-- <1:0D>
Dec 10 09:53:58.64: [17213]: --> <4:41 54 5A 0D>
Dec 10 09:53:58.94: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:53:58.94: [17213]: --> [3:ATZ]
Dec 10 09:53:58.94: [17213]: --> [2:OK]
Dec 10 09:53:58.94: [17213]: DELAY 3000 ms
Dec 10 09:54:01.94: [17213]: <-- [5:ATE0\r]
Dec 10 09:54:01.94: [17213]: <-- <4:41 54 45 30>
Dec 10 09:54:01.94: [17213]: <-- <1:0D>
Dec 10 09:54:01.95: [17213]: --> <5:41 54 45 30 0D>
Dec 10 09:54:02.11: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.11: [17213]: --> [4:ATE0]
Dec 10 09:54:02.11: [17213]: --> [2:OK]
Dec 10 09:54:02.11: [17213]: <-- [5:ATV1\r]
Dec 10 09:54:02.11: [17213]: <-- <4:41 54 56 31>
Dec 10 09:54:02.11: [17213]: <-- <1:0D>
Dec 10 09:54:02.28: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.28: [17213]: --> [2:OK]
Dec 10 09:54:02.28: [17213]: <-- [7:ATQ0X3\r]
Dec 10 09:54:02.28: [17213]: <-- <6:41 54 51 30 58 33>
Dec 10 09:54:02.28: [17213]: <-- <1:0D>
Dec 10 09:54:02.45: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.45: [17213]: --> [2:OK]
Dec 10 09:54:02.45: [17213]: <-- [7:ATS0=0\r]
Dec 10 09:54:02.45: [17213]: <-- <6:41 54 53 30 3D 30>
Dec 10 09:54:02.45: [17213]: <-- <1:0D>
Dec 10 09:54:02.62: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.62: [17213]: --> [2:OK]
Dec 10 09:54:02.62: [17213]: <-- [7:ATS8=2\r]
Dec 10 09:54:02.62: [17213]: <-- <6:41 54 53 38 3D 32>
Dec 10 09:54:02.62: [17213]: <-- <1:0D>
Dec 10 09:54:02.79: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.79: [17213]: --> [2:OK]
Dec 10 09:54:02.79: [17213]: <-- [8:ATS7=60\r]
Dec 10 09:54:02.79: [17213]: <-- <7:41 54 53 37 3D 36 30>
Dec 10 09:54:02.79: [17213]: <-- <1:0D>
Dec 10 09:54:02.96: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:02.96: [17213]: --> [2:OK]
Dec 10 09:54:02.96: [17213]: <-- [12:AT&H2&I2&R1\r]
Dec 10 09:54:02.96: [17213]: <-- <11:41 54 26 48 32 26 49 32 26 52 31>
Dec 10 09:54:02.96: [17213]: <-- <1:0D>
Dec 10 09:54:03.14: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.14: [17213]: --> [2:OK]
Dec 10 09:54:03.14: [17213]: <-- [11:ATS13=1&D2\r]
Dec 10 09:54:03.14: [17213]: <-- <10:41 54 53 31 33 3D 31 26 44 32>
Dec 10 09:54:03.14: [17213]: <-- <1:0D>
Dec 10 09:54:03.31: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.31: [17213]: --> [2:OK]
Dec 10 09:54:03.31: [17213]: <-- [6:AT&C1\r]
Dec 10 09:54:03.31: [17213]: <-- <5:41 54 26 43 31>
Dec 10 09:54:03.31: [17213]: <-- <1:0D>
Dec 10 09:54:03.48: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.48: [17213]: --> [2:OK]
Dec 10 09:54:03.48: [17213]: <-- [12:AT+FCLASS=1\r]
Dec 10 09:54:03.48: [17213]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 31>
Dec 10 09:54:03.48: [17213]: <-- <1:0D>
Dec 10 09:54:03.53: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.53: [17213]: --> [2:OK]
Dec 10 09:54:03.53: [17213]: <-- [12:AT+FCLASS=0\r]
Dec 10 09:54:03.53: [17213]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 30>
Dec 10 09:54:03.53: [17213]: <-- <1:0D>
Dec 10 09:54:03.60: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.60: [17213]: --> [2:OK]
Dec 10 09:54:03.60: [17213]: <-- [5:ATM0\r]
Dec 10 09:54:03.60: [17213]: <-- <4:41 54 4D 30>
Dec 10 09:54:03.60: [17213]: <-- <1:0D>
Dec 10 09:54:03.77: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.77: [17213]: --> [2:OK]
Dec 10 09:54:03.77: [17213]: STATE CHANGE: RUNNING -> SENDING
Dec 10 09:54:03.77: [17213]: MODEM input buffering enabled
Dec 10 09:54:03.77: [17213]: <-- [12:AT+FCLASS=1\r]
Dec 10 09:54:03.77: [17213]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 31>
Dec 10 09:54:03.77: [17213]: <-- <1:0D>
Dec 10 09:54:03.92: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:03.92: [17213]: --> [2:OK]
Dec 10 09:54:03.92: [17213]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Dec 10 09:54:03.95: [17213]: DIAL 9,,000000000
Dec 10 09:54:03.95: [17213]: <-- [18:ATDT9,,000000000\r]
Dec 10 09:54:03.95: [17213]: <-- <17:41 54 44 54 39 2C 2C 30 34 35 37 33 36 33 35 30 35>
Dec 10 09:54:03.95: [17213]: <-- <1:0D>
Dec 10 09:54:30.14: [17213]: --> <35:0D 0A 43 4F 4E 4E 45 43 54 0D 0A FF 03 20 00 00 56 55 55 00 8C 90 80 B9 06 7A A4 10 03 0D 0A 4F 4B 0D 0A>
Dec 10 09:54:30.14: [17213]: --> [7:CONNECT]
Dec 10 09:54:30.14: [17213]: MODEM input buffering disabled
Dec 10 09:54:30.14: [17213]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 09 01 9D 60 5E 25>
Dec 10 09:54:30.14: [17213]: --> [2:OK]
Dec 10 09:54:30.14: [17213]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 B9 06 7A"
Dec 10 09:54:30.14: [17213]: NSF remote fax equipment: Brother 
Dec 10 09:54:30.14: [17213]: <-- [9:AT+FRH=3\r]
Dec 10 09:54:30.14: [17213]: <-- <8:41 54 2B 46 52 48 3D 33>
Dec 10 09:54:30.14: [17213]: <-- <1:0D>
Dec 10 09:54:30.19: [17213]: --> <16:0D 0A 43 4F 4E 4E 45 43 54 0D 0A FF 03 40 35 30>
Dec 10 09:54:30.19: [17213]: --> [7:CONNECT]
Dec 10 09:54:30.21: [17213]: --> <1:35>
Dec 10 09:54:30.24: [17213]: --> <1:33>
Dec 10 09:54:30.26: [17213]: --> <1:36>
Dec 10 09:54:30.29: [17213]: --> <1:33>
Dec 10 09:54:30.32: [17213]: --> <1:37>
Dec 10 09:54:30.34: [17213]: --> <1:35>
Dec 10 09:54:30.37: [17213]: --> <1:34>
Dec 10 09:54:30.40: [17213]: --> <1:30>
Dec 10 09:54:30.42: [17213]: --> <1:20>
Dec 10 09:54:30.45: [17213]: --> <1:20>
Dec 10 09:54:30.48: [17213]: --> <1:20>
Dec 10 09:54:30.50: [17213]: --> <1:20>
Dec 10 09:54:30.53: [17213]: --> <1:20>
Dec 10 09:54:30.56: [17213]: --> <1:20>
Dec 10 09:54:30.58: [17213]: --> <1:20>
Dec 10 09:54:30.61: [17213]: --> <1:20>
Dec 10 09:54:30.64: [17213]: --> <1:20>
Dec 10 09:54:30.66: [17213]: --> <1:20>
Dec 10 09:54:30.69: [17213]: --> <1:A8>
Dec 10 09:54:30.72: [17213]: --> <1:30>
Dec 10 09:54:30.74: [17213]: --> <8:10 03 0D 0A 4F 4B 0D 0A>
Dec 10 09:54:30.74: [17213]: --> HDLC<25:FF C0 02 AC 0C AC CC 6C CC EC AC 2C 0C 04 04 04 04 04 04 04 04 04 04 15 0C>
Dec 10 09:54:30.74: [17213]: --> [2:OK]
Dec 10 09:54:30.74: [17213]: REMOTE CSI "000000000"
Dec 10 09:54:30.74: [17213]: <-- [9:AT+FRH=3\r]
Dec 10 09:54:30.74: [17213]: <-- <8:41 54 2B 46 52 48 3D 33>
Dec 10 09:54:30.74: [17213]: <-- <1:0D>
Dec 10 09:54:30.79: [17213]: --> <12:0D 0A 43 4F 4E 4E 45 43 54 0D 0A FF>
Dec 10 09:54:30.79: [17213]: --> [7:CONNECT]
Dec 10 09:54:30.80: [17213]: --> <1:13>
Dec 10 09:54:30.83: [17213]: --> <1:80>
Dec 10 09:54:30.86: [17213]: --> <1:00>
Dec 10 09:54:30.88: [17213]: --> <1:EE>
Dec 10 09:54:30.91: [17213]: --> <1:A8>
Dec 10 09:54:30.94: [17213]: --> <1:C4>
Dec 10 09:54:30.96: [17213]: --> <1:80>
Dec 10 09:54:30.99: [17213]: --> <1:11>
Dec 10 09:54:31.02: [17213]: --> <1:E7>
Dec 10 09:54:31.05: [17213]: --> <1:B3>
Dec 10 09:54:31.07: [17213]: --> <8:10 03 0D 0A 4F 4B 0D 0A>
Dec 10 09:54:31.07: [17213]: --> HDLC<11:FF C8 01 00 77 15 23 01 88 E7 CD>
Dec 10 09:54:31.07: [17213]: --> [2:OK]
Dec 10 09:54:31.07: [17213]: REMOTE best rate 14400 bit/s
Dec 10 09:54:31.07: [17213]: REMOTE max page width 1728 pixels in 215 mm
Dec 10 09:54:31.07: [17213]: REMOTE max unlimited page length
Dec 10 09:54:31.07: [17213]: REMOTE best vres 7.7 line/mm
Dec 10 09:54:31.07: [17213]: REMOTE best format 2-D MMR
Dec 10 09:54:31.07: [17213]: REMOTE supports T.30 Annex A, ECM
Dec 10 09:54:31.07: [17213]: REMOTE best 10 ms/scanline
Dec 10 09:54:31.07: [17213]: USE 4800 bit/s
Dec 10 09:54:31.07: [17213]: USE 10 ms/scanline
Dec 10 09:54:31.07: [17213]: SEND file "docq/doc11343.ps;41"
Dec 10 09:54:31.10: [17213]: USE page width 1728 pixels in 215 mm
Dec 10 09:54:31.10: [17213]: USE unlimited page length
Dec 10 09:54:31.10: [17213]: USE 7.7 line/mm
Dec 10 09:54:31.10: [17213]: USE 2-D MR
Dec 10 09:54:31.10: [17213]: SEND training at v.27ter 4800 bit/s
Dec 10 09:54:31.10: [17213]: <-- [9:AT+FTH=3\r]
Dec 10 09:54:31.10: [17213]: <-- <8:41 54 2B 46 54 48 3D 33>
Dec 10 09:54:31.10: [17213]: <-- <1:0D>
Dec 10 09:54:31.20: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:31.20: [17213]: --> [7:CONNECT]
Dec 10 09:54:31.20: [17213]: <-- HDLC<23:FF C0 C2 0C 1C EC CC 9C 2C CC 04 8C 8C 0C 04 9C CC D4 04 04 04 04 04>
Dec 10 09:54:31.20: [17213]: <-- data [23]
Dec 10 09:54:31.20: [17213]: <-- <23:FF 03 43 30 38 37 33 39 34 33 20 31 31 30 20 39 33 2B 20 20 20 20 20>
Dec 10 09:54:31.20: [17213]: <-- data [2]
Dec 10 09:54:31.20: [17213]: <-- <2:10 03>
Dec 10 09:54:32.94: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:32.94: [17213]: --> [7:CONNECT]
Dec 10 09:54:32.94: [17213]: <-- HDLC<6:FF C8 C1 00 53 14>
Dec 10 09:54:32.94: [17213]: <-- data [6]
Dec 10 09:54:32.94: [17213]: <-- <6:FF 13 83 00 CA 28>
Dec 10 09:54:32.94: [17213]: <-- data [2]
Dec 10 09:54:32.94: [17213]: <-- <2:10 03>
Dec 10 09:54:33.64: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:33.64: [17213]: --> [2:OK]
Dec 10 09:54:33.64: [17213]: <-- [9:AT+FTS=7\r]
Dec 10 09:54:33.64: [17213]: <-- <8:41 54 2B 46 54 53 3D 37>
Dec 10 09:54:33.64: [17213]: <-- <1:0D>
Dec 10 09:54:33.77: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:33.77: [17213]: --> [2:OK]
Dec 10 09:54:33.77: [17213]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Dec 10 09:54:33.77: [17213]: <-- [10:AT+FTM=48\r]
Dec 10 09:54:33.77: [17213]: <-- <9:41 54 2B 46 54 4D 3D 34 38>
Dec 10 09:54:33.77: [17213]: <-- <1:0D>
Dec 10 09:54:34.74: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:34.74: [17213]: --> [7:CONNECT]
Dec 10 09:54:34.74: [17213]: <-- data [900]
Dec 10 09:54:34.74: [17213]: <-- <900:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>
Dec 10 09:54:34.74: [17213]: <-- data [2]
Dec 10 09:54:34.74: [17213]: <-- <2:10 03>
Dec 10 09:54:36.31: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:36.31: [17213]: --> [2:OK]
Dec 10 09:54:36.31: [17213]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Dec 10 09:54:36.31: [17213]: <-- [9:AT+FRH=3\r]
Dec 10 09:54:36.31: [17213]: <-- <8:41 54 2B 46 52 48 3D 33>
Dec 10 09:54:36.31: [17213]: <-- <1:0D>
Dec 10 09:54:39.41: [17213]: --> [0:]
Dec 10 09:54:39.41: [17213]: MODEM <Empty line>
Dec 10 09:54:39.41: [17213]: MODEM TIMEOUT: waiting for v.21 carrier
Dec 10 09:54:39.41: [17213]: <-- data [1]
Dec 10 09:54:39.41: [17213]: <-- <1:18>
Dec 10 09:54:39.42: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:39.42: [17213]: --> [2:OK]
Dec 10 09:54:39.42: [17213]: DELAY 1500 ms
Dec 10 09:54:40.92: [17213]: SEND training at v.27ter fallback mode 2400 bit/s
Dec 10 09:54:40.92: [17213]: <-- [9:AT+FTH=3\r]
Dec 10 09:54:40.92: [17213]: <-- <8:41 54 2B 46 54 48 3D 33>
Dec 10 09:54:40.92: [17213]: <-- <1:0D>
Dec 10 09:54:41.03: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:41.03: [17213]: --> [7:CONNECT]
Dec 10 09:54:41.03: [17213]: <-- HDLC<23:FF C0 C2 0C 1C EC CC 9C 2C CC 04 8C 8C 0C 04 9C CC D4 04 04 04 04 04>
Dec 10 09:54:41.03: [17213]: <-- data [23]
Dec 10 09:54:41.03: [17213]: <-- <23:FF 03 43 30 38 37 33 39 34 33 20 31 31 30 20 39 33 2B 20 20 20 20 20>
Dec 10 09:54:41.03: [17213]: <-- data [2]
Dec 10 09:54:41.03: [17213]: <-- <2:10 03>
Dec 10 09:54:42.77: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:42.77: [17213]: --> [7:CONNECT]
Dec 10 09:54:42.77: [17213]: <-- HDLC<6:FF C8 C1 00 43 14>
Dec 10 09:54:42.77: [17213]: <-- data [6]
Dec 10 09:54:42.77: [17213]: <-- <6:FF 13 83 00 C2 28>
Dec 10 09:54:42.77: [17213]: <-- data [2]
Dec 10 09:54:42.77: [17213]: <-- <2:10 03>
Dec 10 09:54:43.47: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:43.47: [17213]: --> [2:OK]
Dec 10 09:54:43.47: [17213]: <-- [9:AT+FTS=7\r]
Dec 10 09:54:43.47: [17213]: <-- <8:41 54 2B 46 54 53 3D 37>
Dec 10 09:54:43.47: [17213]: <-- <1:0D>
Dec 10 09:54:43.60: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:43.60: [17213]: --> [2:OK]
Dec 10 09:54:43.60: [17213]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Dec 10 09:54:43.60: [17213]: <-- [10:AT+FTM=24\r]
Dec 10 09:54:43.60: [17213]: <-- <9:41 54 2B 46 54 4D 3D 32 34>
Dec 10 09:54:43.60: [17213]: <-- <1:0D>
Dec 10 09:54:44.80: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:44.80: [17213]: --> [7:CONNECT]
Dec 10 09:54:44.80: [17213]: <-- data [450]
Dec 10 09:54:44.80: [17213]: <-- <450:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>
Dec 10 09:54:44.80: [17213]: <-- data [2]
Dec 10 09:54:44.80: [17213]: <-- <2:10 03>
Dec 10 09:54:46.39: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:46.39: [17213]: --> [2:OK]
Dec 10 09:54:46.39: [17213]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Dec 10 09:54:46.39: [17213]: <-- [9:AT+FRH=3\r]
Dec 10 09:54:46.39: [17213]: <-- <8:41 54 2B 46 52 48 3D 33>
Dec 10 09:54:46.39: [17213]: <-- <1:0D>
Dec 10 09:54:49.49: [17213]: --> [0:]
Dec 10 09:54:49.49: [17213]: MODEM <Empty line>
Dec 10 09:54:49.49: [17213]: MODEM TIMEOUT: waiting for v.21 carrier
Dec 10 09:54:49.49: [17213]: <-- data [1]
Dec 10 09:54:49.49: [17213]: <-- <1:18>
Dec 10 09:54:49.50: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:49.50: [17213]: --> [2:OK]
Dec 10 09:54:49.50: [17213]: DELAY 1500 ms
Dec 10 09:54:51.00: [17213]: TRAINING failed
Dec 10 09:54:51.00: [17213]: <-- [9:AT+FTH=3\r]
Dec 10 09:54:51.00: [17213]: <-- <8:41 54 2B 46 54 48 3D 33>
Dec 10 09:54:51.00: [17213]: <-- <1:0D>
Dec 10 09:54:51.11: [17213]: --> <11:0D 0A 43 4F 4E 4E 45 43 54 0D 0A>
Dec 10 09:54:51.11: [17213]: --> [7:CONNECT]
Dec 10 09:54:51.11: [17213]: <-- HDLC<3:FF C8 DF>
Dec 10 09:54:51.11: [17213]: <-- data [3]
Dec 10 09:54:51.11: [17213]: <-- <3:FF 13 FB>
Dec 10 09:54:51.11: [17213]: <-- data [2]
Dec 10 09:54:51.11: [17213]: <-- <2:10 03>
Dec 10 09:54:52.32: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:52.32: [17213]: --> [2:OK]
Dec 10 09:54:52.32: [17213]: MODEM input buffering enabled
Dec 10 09:54:52.32: [17213]: <-- [5:ATH0\r]
Dec 10 09:54:52.32: [17213]: <-- <4:41 54 48 30>
Dec 10 09:54:52.32: [17213]: <-- <1:0D>
Dec 10 09:54:52.72: [17213]: --> <6:0D 0A 4F 4B 0D 0A>
Dec 10 09:54:52.72: [17213]: --> [2:OK]
Dec 10 09:54:52.72: [17213]: MODEM set DTR OFF
Dec 10 09:54:52.72: [17213]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Dec 10 09:54:52.72: [17213]: SESSION END
-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
Follow-Ups:
- Re: [hylafax-users] FRH=3 -> timeout waiting for v.21 carrier
  - From: Lee Howard
Prev by Date: Re: [hylafax-users] No response to sendfax?
Next by Date: [hylafax-users] No response to sendfax?
Previous by thread: Re: [hylafax-users] Hylafax & modem
Next by thread: Re: [hylafax-users] FRH=3 -> timeout waiting for v.21 carrier
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services