Re: [hylafax-users] modem (or faxgetty?) hangs "receiving from ..."

[Patrick Fromberg <patrick.fromberg@xxxxxxxxx>]

Lee Howard wrote:
> Would you mind sharing a log with us from one of the sessions where 
> faxgetty hangs?
>
> Lee.

Here it is:

Dec 04 13:33:55.33: [29411]: SESSION BEGIN 00000185 498944429004
Dec 04 13:33:55.33: [29411]: HylaFAX (tm) Version 4.1.7
Dec 04 13:33:55.33: [29411]: <-- [4:ATA\r]
Dec 04 13:34:04.69: [29411]: --> [4:+FCO]
Dec 04 13:34:04.69: [29411]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Dec 04 13:34:04.69: [29411]: RECV FAX: begin
Dec 04 13:34:04.69: [29411]: RECV FAX: CDPN
Dec 04 13:34:09.45: [29411]: --> [27:+FTI:"       +498996997388"]
Dec 04 13:34:09.45: [29411]: REMOTE TSI "+498996997388"
Dec 04 13:34:09.45: [29411]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Dec 04 13:34:09.45: [29411]: REMOTE wants 14400 bit/s
Dec 04 13:34:09.45: [29411]: REMOTE wants page width 1728 pixels in 215 mm
Dec 04 13:34:09.45: [29411]: REMOTE wants unlimited page length
Dec 04 13:34:09.45: [29411]: REMOTE wants 3.85 line/mm
Dec 04 13:34:09.45: [29411]: REMOTE wants 1-D MR
Dec 04 13:34:09.45: [29411]: --> [2:OK]
Dec 04 13:34:09.45: [29411]: <-- [7:AT+FDR\r]
Dec 04 13:34:11.54: [29411]: --> [7:CONNECT]
Dec 04 13:34:11.54: [29411]: RECV: begin page
Dec 04 13:34:11.54: [29411]: RECV: send trigger 022
Dec 04 13:34:11.54: [29411]: <-- data [1]
Dec 04 13:34:25.50: [29411]: RECV: 24627 bytes of data, 1163 total lines
Dec 04 16:27:01.50: [29411]: CLOSE /dev/ttyS0

Patrick
> On 2003.12.04 08:38 Patrick Fromberg wrote:
>
> > This issue has been discussed many times already.
> > One solution is to install patch.
> >
> > http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=378
> >
> > I have done that implicitely by updating to Hyla 4.1.7.
> >
> > That did not solve the problem. I was using a USR Modem
> > with Class 2.0, which I should not as I have heard.
> > I switched to Class 1 but the problem persists. I switched
> > to Elsa Microlink 33000 (which only does Class 2.0) and
> > Problem still remains.
> >
> > Sometimes it goes fine for days and then a fax comes
> > in and faxgetty hangs. The only way to recover
> > is to kill -9 faxgetty pid.
> >
> > I have this on different machines, but they are all SuSE 8.2.
> >
> > I saw, that there is also a linux kernel incompatibility. Does
> > anybody know to which kernel Version I have to update? Unfortunatley I 
> > can not downgrade.
> >
> > Patrick
> >
> > ____________________ HylaFAX(tm) Users Mailing List 
> > _______________________
> >  To subscribe/unsubscribe, click 
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> > /dev/null
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*