Re: [hylafax-users] Keepng the cover page in the log

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Forgive my not commenting on this earlier (in one of its incantations, 
since I think this has been reposted), I didn't really understand the 
question.

As I now understand it, you want notify to recall the "regarding" 
information that was placed on the fax cover sheet.

This is not really possible because the coversheet is created by the 
client program and not the server.  The server doesn't realize that the 
cover sheet is actually a cover sheet, it just sees it as another 
document to fax.

In theory you could have notify try to "read" the "regarding" 
information off of the documents for the fax, but that could involve 
OCR (if the cover sheet is TIFF) or some PostScript programming 
expertise (if the cover sheet is PostScript).  It would be ugly.

Lee.


On 2003.11.27 15:48 Nigel Allen wrote:
> I wish it were that simple.
>
> According to the documentation and the q file - copied here, there is
> no
> mention of the "regarding" field.
>
> ts:1069976412
> killtime:1069986805
> retrytime:0
> state:7
> npages:2
> totpages:2
> ntries:0
> ndials:0
> totdials:2
> maxdials:12
> tottries:1
> maxtries:3
> pagewidth:194
> resolution:196
> pagelength:281
> priority:127
> schedpri:126
> minsp:0
> desiredbr:13
> desiredst:0
> desiredec:1
> desireddf:3
> desiredtl:0
> useccover:1
> external:02 9450 2691
> number:02 9450 2691
> mailaddr:trevorl
> sender:Trevor Lane
> jobid:78
> jobtag:
> pagehandling:
> modem:any
> receiver:
> company:Pro Smart Consulting
> location:Terrey Hills NSW 2084
> cover:
> client:192.168.0.222
> owner:trevorl
> groupid:78
> signalrate:14400 bit/s
> dataformat:1-D MR
> jobtype:facsimile
> tagline:
> subaddr:
> passwd:
> doneop:default
> commid:00007545
> status:
> notify:when done+requeued
> pagechop:default
> chopthreshold:3
> !postscript:0::docq/doc78.cover
> !postscript:0::docq/doc144.ps
>
> Any other suggestions please? I cannot believe that this has not been
> asked
> for before now :)
>
> N.
>
>
> On Thu, 27 Nov 2003 20:01, you wrote:
> > On Thu, Nov 27, 2003 at 03:10:28PM +1100, Nigel Allen wrote:
> > > Hi Again
> > >
> > > Of course - when I spoke of the "Subject" below - I mean the
> "regarding"
> > > field.
> >
> > Well, it should be in the job control file, look in your doneq/
> directory.
> >
> > Andreas
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*
>
> --
> ---------------------------------------------------------------------------------------
> Nigel Allen
> Senior Consultant
> Prosmart Consulting Australia
> Ph: +61 2 9450 2690
> Fx: +61 2 9450 2681
> http://www.prosmart.com.au
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*