|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Can't send or receive fax with hylaFAX v.4.1.7-1
Hi guys,
i?m in trouble with the server..
I have installed and configured HylaFAX v. 4.1.7-1 and the modem too.
The modem is a U.S. robotics 56k fax modem.
When I send a fax I receive back always the error: Busy signal detected.
Here is the log of a job:
nov 02 21:42:07.67: [ 3604]: SESSION BEGIN 00000001 39302016058
nov 02 21:42:07.67: [ 3604]: HylaFAX (tm) Version 4.1.7
nov 02 21:42:07.67: [ 3604]: SEND FAX: JOB 7 DEST 0302016058 COMMID 00000001 DEVICE '/dev/ttyS0'
nov 02 21:42:07.67: [ 3604]: DELAY 75 ms
nov 02 21:42:07.74: [ 3604]: DELAY 2600 ms
nov 02 21:42:11.35: [ 3604]: DELAY 10 ms
nov 02 21:42:11.36: [ 3604]: <-- [4:ATZ\r]
nov 02 21:42:11.50: [ 3604]: --> [2:OK]
nov 02 21:42:11.50: [ 3604]: DELAY 3000 ms
nov 02 21:42:14.50: [ 3604]: <-- [5:ATE0\r]
nov 02 21:42:14.64: [ 3604]: --> [4:ATE0]
nov 02 21:42:14.64: [ 3604]: --> [2:OK]
nov 02 21:42:14.64: [ 3604]: <-- [5:ATV1\r]
nov 02 21:42:14.78: [ 3604]: --> [2:OK]
nov 02 21:42:14.78: [ 3604]: <-- [7:ATQ0X4\r]
nov 02 21:42:14.92: [ 3604]: --> [2:OK]
nov 02 21:42:14.92: [ 3604]: <-- [7:ATS0=0\r]
nov 02 21:42:15.06: [ 3604]: --> [2:OK]
nov 02 21:42:15.06: [ 3604]: <-- [7:ATS8=2\r]
nov 02 21:42:15.20: [ 3604]: --> [2:OK]
nov 02 21:42:15.20: [ 3604]: <-- [8:ATS7=60\r]
nov 02 21:42:15.34: [ 3604]: --> [2:OK]
nov 02 21:42:15.34: [ 3604]: <-- [12:AT&H1&I0&R2\r]
nov 02 21:42:15.48: [ 3604]: --> [2:OK]
nov 02 21:42:15.48: [ 3604]: <-- [11:ATS13=1&D2\r]
nov 02 21:42:15.62: [ 3604]: --> [2:OK]
nov 02 21:42:15.62: [ 3604]: <-- [6:AT&C1\r]
nov 02 21:42:15.76: [ 3604]: --> [2:OK]
nov 02 21:42:15.76: [ 3604]: <-- [14:AT+FCLASS=2.0\r]
nov 02 21:42:15.90: [ 3604]: --> [2:OK]
nov 02 21:42:15.90: [ 3604]: <-- [9:AT+FLO=2\r]
nov 02 21:42:16.04: [ 3604]: --> [2:OK]
nov 02 21:42:16.04: [ 3604]: <-- [9:AT+FPP=0\r]
nov 02 21:42:16.18: [ 3604]: --> [2:OK]
nov 02 21:42:16.18: [ 3604]: <-- [9:AT+FBO=0\r]
nov 02 21:42:16.32: [ 3604]: --> [2:OK]
nov 02 21:42:16.32: [ 3604]: <-- [10:AT+FCT=30\r]
nov 02 21:42:16.46: [ 3604]: --> [2:OK]
nov 02 21:42:16.46: [ 3604]: <-- [15:AT+FNR=1,1,1,0\r]
nov 02 21:42:16.60: [ 3604]: --> [2:OK]
nov 02 21:42:16.60: [ 3604]: <-- [9:AT+FIE=0\r]
nov 02 21:42:16.74: [ 3604]: --> [2:OK]
nov 02 21:42:16.74: [ 3604]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
nov 02 21:42:16.89: [ 3604]: --> [2:OK]
nov 02 21:42:16.89: [ 3604]: <-- [5:ATM0\r]
nov 02 21:42:17.03: [ 3604]: --> [2:OK]
nov 02 21:42:17.03: [ 3604]: <-- [14:AT+FCLASS=2.0\r]
nov 02 21:42:17.27: [ 3604]: --> [2:OK]
nov 02 21:42:17.27: [ 3604]: <-- [9:AT+FLO=2\r]
nov 02 21:42:17.51: [ 3604]: --> [2:OK]
nov 02 21:42:17.51: [ 3604]: <-- [9:AT+FPP=0\r]
nov 02 21:42:17.75: [ 3604]: --> [2:OK]
nov 02 21:42:17.75: [ 3604]: <-- [9:AT+FBO=0\r]
nov 02 21:42:17.99: [ 3604]: --> [2:OK]
nov 02 21:42:17.99: [ 3604]: <-- [10:AT+FCT=30\r]
nov 02 21:42:18.23: [ 3604]: --> [2:OK]
nov 02 21:42:18.23: [ 3604]: <-- [15:AT+FNR=1,1,1,0\r]
nov 02 21:42:18.47: [ 3604]: --> [2:OK]
nov 02 21:42:18.47: [ 3604]: <-- [9:AT+FIE=0\r]
nov 02 21:42:18.71: [ 3604]: --> [2:OK]
nov 02 21:42:18.71: [ 3604]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
nov 02 21:42:18.96: [ 3604]: --> [2:OK]
nov 02 21:42:18.96: [ 3604]: <-- [22:AT+FLI="NothingSetup"\r]
nov 02 21:42:19.21: [ 3604]: --> [2:OK]
nov 02 21:42:19.23: [ 3604]: DIAL 0302016058
nov 02 21:42:19.23: [ 3604]: <-- [15:ATDT0302016058\r]
nov 02 21:42:55.79: [ 3604]: --> [4:BUSY]
nov 02 21:42:55.79: [ 3604]: SEND FAILED: JOB 7 DEST 0302016058 ERR Busy signal detected
nov 02 21:42:55.79: [ 3604]: <-- [5:ATH0\r]
nov 02 21:42:56.03: [ 3604]: --> [2:OK]
nov 02 21:42:56.03: [ 3604]: SESSION END
But i know that the line is not busy!
The other errors that occurs is when a receive a fax:
Here is the log:
Nov 02 21:56:03.68: [ 3389]: SESSION BEGIN 00000005 390458201982
Nov 02 21:56:03.68: [ 3389]: HylaFAX (tm) Version 4.1.7
Nov 02 21:56:03.68: [ 3389]: <-- [4:ATA\r]
Nov 02 21:56:57.09: [ 3389]: --> [10:NO CARRIER]
Nov 02 21:56:57.09: [ 3389]: ANSWER: Ring detected without successful handshake
Nov 02 21:56:57.09: [ 3389]: SESSION END
I?m a new user of HylaFAX and I can?t understand what I?ve to do..
The modem is set as a 2.0 class modem.
Is someone able to help me? A lot of thanx in advance, if u need some other infos just ask!
Thanx again _d12
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
