Re: [hylafax-users] supported hw fax modem list?

[rtjohan@xxxxxxxxxxx]

Thanks for the tip - MultiTech looks promising.

Is there any open-source software that implements basic PBX or Key 
system / voice mail features? Unlikely, but then again was surprised to 
find hylafax :)

Thanks,
Richard

Lee Howard wrote:

> On 2003.09.30 20:57 rtjohan@xxxxxxxxxxx wrote:
>
> > Thanks for quick response :)
> >
> > If I'm buying a new fax modem for a freebsd machine, which one should 
> > I get?
>
>
> Well, for the most-part, any Class 1 modem will be nearly fine - 
> especially if you can put together the config file yourself.  Class 2 
> is another story altogether.  The exception to this rule are USR 
> modems in Class 1 (occasional firmware freezes with new models) or 
> Class 2 (flawed protocol) and Digi modems in Class 1 (flawed protocol, 
> their Class 2/2.0 seems fine).
>
> However, if you do run into a firmware problem, it pays to have a 
> manufacturer who supports their hardware.  And, the only single-line 
> analog modem manufacturer that I know of that does... is MultiTech... 
> plus MultiTech's Class 2/2.0/2.1 feature-set (MMR, RTFCC, and V.34) is 
> nice to have.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*