|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Troubles with Multitech ISI5634PCI-8
On Tue, 2003-09-23 at 18:14, Lee Howard wrote:
> On 2003.09.23 09:00 Andrea Nicolini wrote:
> > Hi All,
> >
> > I'm having troubles with Multitech fax board (ISI5634PCI-8),
> > is there anybody who's using this one?
> > I'm using Hylafax4.1.7 on a RedHat9, i configured the board in Class
> > 1,
> > it seems to send correctly but sometimes i receive corrupted faxes.
> > The big trouble is that the corrupted file are reported as 'correctly
> > received' in etc/xferfaxlog!!!
> >
> > Can you please help me?
>
> A log would help to explain things.
Ok, here it is:
Sep 23 16:01:21.05: [15171]: SESSION BEGIN 00004100 390434621766
Sep 23 16:01:21.05: [15171]: HylaFAX (tm) Version 4.1.7
Sep 23 16:01:21.05: [15171]: <-- [4:ATA\r]
Sep 23 16:01:29.72: [15171]: --> [7:CONNECT]
Sep 23 16:01:29.72: [15171]: ANSWER: FAX CONNECTION DEVICE
'/dev/ttyM1d'
Sep 23 16:01:29.72: [15171]: RECV FAX: begin
Sep 23 16:01:29.72: [15171]: <-- data [23]
Sep 23 16:01:29.72: [15171]: <-- data [2]
Sep 23 16:01:29.79: [15171]: --> [7:CONNECT]
Sep 23 16:01:29.79: [15171]: <-- data [10]
Sep 23 16:01:29.79: [15171]: <-- data [2]
Sep 23 16:01:31.16: [15171]: --> [2:OK]
Sep 23 16:01:31.16: [15171]: <-- [9:AT+FRH=3\r]
Sep 23 16:01:31.63: [15171]: --> [7:CONNECT]
Sep 23 16:01:32.97: [15171]: --> [2:OK]
Sep 23 16:01:32.97: [15171]: REMOTE wants 9600 bit/s
Sep 23 16:01:32.97: [15171]: REMOTE wants page width 1728 pixels in 215
mm
Sep 23 16:01:32.97: [15171]: REMOTE wants unlimited page length
Sep 23 16:01:32.97: [15171]: REMOTE wants 3.85 line/mm
Sep 23 16:01:32.97: [15171]: REMOTE wants 1-D MR
Sep 23 16:01:32.97: [15171]: RECV training at v.29 9600 bit/s
Sep 23 16:01:32.97: [15171]: <-- [10:AT+FRM=96\r]Sep 23 16:01:34.82:
[15171]: RECV: TCF 1808 bytes, 0% non-zero, 1807 zero-run
Sep 23 16:01:34.82: [15171]: --> [10:NO CARRIER]
Sep 23 16:01:34.82: [15171]: DELAY 75 ms
Sep 23 16:01:34.90: [15171]: TRAINING succeeded
Sep 23 16:01:34.90: [15171]: <-- [9:AT+FTH=3\r]
Sep 23 16:01:35.91: [15171]: --> [7:CONNECT]
Sep 23 16:01:35.91: [15171]: <-- data [3]
Sep 23 16:01:35.91: [15171]: <-- data [2]
Sep 23 16:01:36.44: [15171]: --> [2:OK]
Sep 23 16:01:36.44: [15171]: <-- [10:AT+FRM=96\r]
Sep 23 16:01:37.75: [15171]: --> [7:CONNECT]
Sep 23 16:01:37.75: [15171]: RECV: begin page
Sep 23 16:02:05.06: [15171]: RECV: 0 total lines, 0 bad lines, 0
consecutive bad lines
Sep 23 16:02:05.06: [15171]: RECV: end page
Sep 23 16:02:05.06: [15171]: --> [10:NO CARRIER]
Sep 23 16:02:05.06: [15171]: <-- [9:AT+FRH=3\r]
Sep 23 16:02:05.20: [15171]: --> [7:CONNECT]
Sep 23 16:02:06.23: [15171]: --> [2:OK]
Sep 23 16:02:06.23: [15171]: RECV recv EOP (no more pages or documents)
Sep 23 16:02:06.23: [15171]: <-- [9:AT+FRS=7\r]
Sep 23 16:01:33.32: [15171]: --> [7:CONNECT]
Sep 23 16:02:06.35: [15171]: --> [2:OK]
Sep 23 16:02:06.35: [15171]: <-- [9:AT+FTH=3\r]
Sep 23 16:02:07.35: [15171]: --> [7:CONNECT]
Sep 23 16:02:07.35: [15171]: <-- data [3]
Sep 23 16:02:07.35: [15171]: <-- data [2]
Sep 23 16:02:07.87: [15171]: --> [2:OK]
Sep 23 16:02:07.87: [15171]: RECV send MCF (message confirmation)
Sep 23 16:02:07.87: [15171]: RECV FAX (00004100): from <UNSPECIFIED>,
page 1 in 0:33, INF, 3.85 line/mm, 1-D MR, 9600 bit/s
Sep 23 16:02:07.87: [15171]: RECV FAX (00004100): recvq/fax01900.tif
from <UNSPECIFIED>, route to <unspecified>, 1 pages in 0:38
Sep 23 16:02:07.87: [15171]: <-- [9:AT+FRH=3\r]
Sep 23 16:02:08.31: [15171]: --> [7:CONNECT]
Sep 23 16:02:09.51: [15171]: --> [2:OK]
Sep 23 16:02:09.51: [15171]: RECV FAX: bin/faxrcvd "recvq/fax01900.tif"
"ttyM1d" "00004100" "" "" ""
Sep 23 16:02:11.78: [15171]: RECV FAX: end
Sep 23 16:02:11.78: [15171]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
