|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Courier V.everything Code 44
On Monday, September 8, 2003, at 05:12 PM, Lee Howard wrote:
On 2003.09.08 14:06 Mark Gillingham wrote:
Many on the list have suggested that this modem be configured as a
Class 1 modem. When I use faxaddmodem to create a Class 1 config
file, I get ERR No local dialtone.
Perhaps try:
ModemDialCmd: ATX3DT%s
Lee.
The error message with a Class 1 configuration is:
Sep 9 11:28:55 web2 FaxSend[3292]: SEND FAILED: JOB 2780 DEST
13123325870,,262 ERR Failure to train remote modem at 2400 bps or
minimum speed; too many attempts to send
My current config is:
ModemType: Class1 # use this to supply a hint
ModemDialCmd: ATX3DT%s # T for tone dialing
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM
Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF
Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP
Class1MsgRecvHackCmd: "" # command to avoid +FCERROR before image
Class1TCFResponseDelay: 75 # 75ms delay between recv TCF & response
Class1SendMsgDelay: 75 # 75ms delay after training
Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and trans
Class1TrainingRecovery: 1500 # 1.5sec delay after training failure
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
