|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] sendmail & hylafax problem, hylafax cant disconnect after recieving fax.
Title:
i got a weird problem.
im build a fax / router / server with one pc.
hylafax receiving the faxes fine as long sendmail
have a config error or other error.
if sendmail is working normal hylafax cant disconnect
the phone line after receiving a fax.
i cant find the problem, someone a idea ?
i use slackware 9 , sendmail 8.12.9 & hylafax 4.1.7
here a log file
----------------------------------
Aug 17 23:03:10.58: [ 177]: SESSION BEGIN 00000047 4
Aug 17 23:03:10.58: [ 177]: HylaFAX (tm) Version 4.1.7
Aug 17 23:03:10.58: [ 177]: <-- [4:ATA\r]
Aug 17 23:03:16.08: [ 177]: --> [7:CONNECT]
Aug 17 23:03:16.08: [ 177]: ANSWER: FAX CONNECTION DEVICE
'/dev/ttyS2'
Aug 17 23:03:16.08: [ 177]: RECV FAX: begin
Aug 17 23:03:16.12: [ 177]: <-- data [23]
Aug 17 23:03:16.12: [ 177]: <-- data [2]
Aug 17 23:03:17.77: [ 177]: --> [7:CONNECT]
Aug 17 23:03:17.77: [ 177]: <-- data [10]
Aug 17 23:03:17.77: [ 177]: <-- data [2]
Aug 17 23:03:18.30: [ 177]: --> [2:OK]
Aug 17 23:03:18.30: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:03:18.79: [ 177]: --> [7:CONNECT]
Aug 17 23:03:20.22: [ 177]: --> [2:OK]
Aug 17 23:03:20.22: [ 177]: REMOTE TSI "Fax"
Aug 17 23:03:20.22: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:03:20.24: [ 177]: --> [7:CONNECT]
Aug 17 23:03:20.46: [ 177]: --> [2:OK]
Aug 17 23:03:20.46: [ 177]: REMOTE wants 14400 bit/s
Aug 17 23:03:20.46: [ 177]: REMOTE wants page width 1728 pixels in 215
mm
Aug 17 23:03:20.46: [ 177]: REMOTE wants A4 page length (297 mm)
Aug 17 23:03:20.46: [ 177]: REMOTE wants 7.7 line/mm
Aug 17 23:03:20.46: [ 177]: REMOTE wants 2-D MR
Aug 17 23:03:20.46: [ 177]: RECV training at v.17 14400 bit/s
Aug 17 23:03:20.46: [ 177]: <-- [11:AT+FRM=145\r]
Aug 17 23:03:22.20: [ 177]: --> [7:CONNECT]
Aug 17 23:03:23.93: [ 177]: RECV: TCF 3079 bytes, 10% non-zero, 2720
zero-run
Aug 17 23:03:23.94: [ 177]: --> [10:NO CARRIER]
Aug 17 23:03:23.94: [ 177]: DELAY 75 ms
Aug 17 23:03:24.02: [ 177]: TRAINING succeeded
Aug 17 23:03:24.02: [ 177]: <-- [9:AT+FTH=3\r]
Aug 17 23:03:24.07: [ 177]: --> [7:CONNECT]
Aug 17 23:03:24.07: [ 177]: <-- data [3]
Aug 17 23:03:24.07: [ 177]: <-- data [2]
Aug 17 23:03:25.37: [ 177]: --> [2:OK]
Aug 17 23:03:25.37: [ 177]: <-- [11:AT+FRM=146\r]
Aug 17 23:03:25.99: [ 177]: --> [7:CONNECT]
Aug 17 23:03:25.99: [ 177]: RECV: begin page
Aug 17 23:03:32.68: [ 177]: RECV: 2254 total lines, 0 bad lines, 0
consecutive bad lines
Aug 17 23:03:32.68: [ 177]: RECV: end page
Aug 17 23:03:32.68: [ 177]: --> [10:NO CARRIER]
Aug 17 23:03:32.68: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:03:33.03: [ 177]: --> [7:CONNECT]
Aug 17 23:03:33.82: [ 177]: --> [2:OK]
Aug 17 23:03:33.82: [ 177]: RECV recv MPS (more pages, same document)
Aug 17 23:03:33.82: [ 177]: <-- [9:AT+FRS=7\r]
Aug 17 23:03:33.94: [ 177]: --> [2:OK]
Aug 17 23:03:33.94: [ 177]: <-- [9:AT+FTH=3\r]
Aug 17 23:03:33.99: [ 177]: --> [7:CONNECT]
Aug 17 23:03:33.99: [ 177]: RECV send MCF (message confirmation)
Aug 17 23:03:33.99: [ 177]: RECV FAX (00000047): from Fax, page 1 in
0:09, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
Aug 17 23:03:33.99: [ 177]: <-- data [3]
Aug 17 23:03:33.99: [ 177]: <-- data [2]
Aug 17 23:03:35.29: [ 177]: --> [2:OK]
Aug 17 23:03:35.29: [ 177]: <-- [11:AT+FRM=146\r]
Aug 17 23:03:35.90: [ 177]: --> [7:CONNECT]
Aug 17 23:03:35.90: [ 177]: RECV: begin page
Aug 17 23:03:50.68: [ 177]: RECV: 2254 total lines, 0 bad lines, 0
consecutive bad lines
Aug 17 23:03:50.68: [ 177]: RECV: end page
Aug 17 23:03:50.68: [ 177]: --> [10:NO CARRIER]
Aug 17 23:03:50.68: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:03:51.03: [ 177]: --> [7:CONNECT]
Aug 17 23:03:51.82: [ 177]: --> [2:OK]
Aug 17 23:03:51.82: [ 177]: RECV recv MPS (more pages, same document)
Aug 17 23:03:51.82: [ 177]: <-- [9:AT+FRS=7\r]
Aug 17 23:03:51.94: [ 177]: --> [2:OK]
Aug 17 23:03:51.94: [ 177]: <-- [9:AT+FTH=3\r]
Aug 17 23:03:51.99: [ 177]: --> [7:CONNECT]
Aug 17 23:03:51.99: [ 177]: RECV send MCF (message confirmation)
Aug 17 23:03:51.99: [ 177]: RECV FAX (00000047): from Fax, page 2 in
0:18, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
Aug 17 23:03:51.99: [ 177]: <-- data [3]
Aug 17 23:03:51.99: [ 177]: <-- data [2]
Aug 17 23:03:53.29: [ 177]: --> [2:OK]
Aug 17 23:03:53.29: [ 177]: <-- [11:AT+FRM=146\r]
Aug 17 23:03:53.91: [ 177]: --> [7:CONNECT]
Aug 17 23:03:53.91: [ 177]: RECV: begin page
Aug 17 23:04:05.62: [ 177]: RECV: 2254 total lines, 0 bad lines, 0
consecutive bad lines
Aug 17 23:04:05.62: [ 177]: RECV: end page
Aug 17 23:04:05.62: [ 177]: --> [10:NO CARRIER]
Aug 17 23:04:05.62: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:04:05.98: [ 177]: --> [7:CONNECT]
Aug 17 23:04:06.84: [ 177]: --> [2:OK]
Aug 17 23:04:06.84: [ 177]: RECV recv EOP (no more pages or documents)
Aug 17 23:04:06.84: [ 177]: <-- [9:AT+FRS=7\r]
Aug 17 23:04:06.96: [ 177]: --> [2:OK]
Aug 17 23:04:06.96: [ 177]: <-- [9:AT+FTH=3\r]
Aug 17 23:04:07.01: [ 177]: --> [7:CONNECT]
Aug 17 23:04:07.01: [ 177]: <-- data [3]
Aug 17 23:04:07.01: [ 177]: <-- data [2]
Aug 17 23:04:08.32: [ 177]: --> [2:OK]
Aug 17 23:04:08.32: [ 177]: RECV send MCF (message confirmation)
Aug 17 23:04:08.32: [ 177]: RECV FAX (00000047): from Fax, page 3 in
0:17, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
Aug 17 23:04:08.34: [ 177]: RECV FAX (00000047): recvq/fax00046.tif
from Fax, route to <unspecified>, 3 pages in 0:52
Aug 17 23:04:08.35: [ 177]: <-- [9:AT+FRH=3\r]
Aug 17 23:04:08.85: [ 177]: --> [7:CONNECT]
Aug 17 23:04:09.74: [ 177]: --> [2:OK]
Aug 17 23:04:09.74: [ 177]: RECV FAX: bin/faxrcvd "recvq/fax00046.tif"
"ttyS2" "00000047" "" "" ""
and here it ends, no end comman.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
