[hylafax-users] REMOTE HANGUP: No response to EOP repeated 3 times (code 54)

["kengheng" <ckh@mysql.cc>]

Hi all, I got this error on my log file, the modem I used is aztech 56K external modem that support class 1,2,1.0

I've set hylafax to use class 2, however I can send to some fax machine, but on some fax machines I got this error....

 

REMOTE HANGUP: No response to EOP repeated 3 times (code 54)

 

    ---- Transcript of session follows ----

Aug 12 15:49:59.22: [ 1520]: SESSION BEGIN 00000004 6074151033
Aug 12 15:49:59.22: [ 1520]: HylaFAX (tm) Version 4.1.7
Aug 12 15:49:59.22: [ 1520]: SEND FAX: JOB 4 DEST xxxxxxx COMMID 00000004 DEVICE '/dev/ttyS0'
Aug 12 15:49:59.22: [ 1520]: DELAY 75 ms
Aug 12 15:49:59.30: [ 1520]: DELAY 2600 ms
Aug 12 15:50:02.91: [ 1520]: DELAY 10 ms
Aug 12 15:50:02.92: [ 1520]: <-- [4:ATZ\r]
Aug 12 15:50:03.25: [ 1520]: --> [2:OK]
Aug 12 15:50:03.25: [ 1520]: DELAY 3000 ms
Aug 12 15:50:06.25: [ 1520]: <-- [5:ATE0\r]
Aug 12 15:50:06.26: [ 1520]: --> [4:ATE0]
Aug 12 15:50:06.26: [ 1520]: --> [2:OK]
Aug 12 15:50:06.26: [ 1520]: <-- [5:ATV1\r]
Aug 12 15:50:06.28: [ 1520]: --> [2:OK]
Aug 12 15:50:06.28: [ 1520]: <-- [5:ATQ0\r]
Aug 12 15:50:06.30: [ 1520]: --> [2:OK]
Aug 12 15:50:06.30: [ 1520]: <-- [7:ATS0=0\r]
Aug 12 15:50:06.34: [ 1520]: --> [2:OK]
Aug 12 15:50:06.34: [ 1520]: <-- [7:ATS8=2\r]
Aug 12 15:50:06.37: [ 1520]: --> [2:OK]
Aug 12 15:50:06.37: [ 1520]: <-- [8:ATS7=60\r]
Aug 12 15:50:06.40: [ 1520]: --> [2:OK]
Aug 12 15:50:06.40: [ 1520]: <-- [6:AT&K4\r]
Aug 12 15:50:06.42: [ 1520]: --> [2:OK]
Aug 12 15:50:06.42: [ 1520]: <-- [6:AT&D3\r]
Aug 12 15:50:06.44: [ 1520]: --> [2:OK]
Aug 12 15:50:06.44: [ 1520]: <-- [6:AT&C1\r]
Aug 12 15:50:06.47: [ 1520]: --> [2:OK]
Aug 12 15:50:06.47: [ 1520]: <-- [12:AT+FCLASS=2\r]
Aug 12 15:50:36.47: [ 1520]: MODEM <Timeout>
Aug 12 15:50:36.47: [ 1520]: <-- [10:AT+FTBC=0\r]
Aug 12 15:50:36.49: [ 1520]: --> [5:ERROR]
Aug 12 15:50:36.49: [ 1520]: MODEM Command error
Aug 12 15:50:36.49: [ 1520]: <-- [10:AT+FBOR=0\r]
Aug 12 15:50:36.51: [ 1520]: --> [5:ERROR]
Aug 12 15:50:36.51: [ 1520]: MODEM Command error
Aug 12 15:50:36.51: [ 1520]: <-- [13:AT+FPHCTO=30\r]
Aug 12 15:50:36.53: [ 1520]: --> [2:OK]
Aug 12 15:50:36.53: [ 1520]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Aug 12 15:50:36.55: [ 1520]: --> [2:OK]
Aug 12 15:50:36.55: [ 1520]: <-- [5:ATM0\r]
Aug 12 15:50:36.57: [ 1520]: --> [2:OK]
Aug 12 15:50:36.57: [ 1520]: <-- [12:AT+FCLASS=2\r]
Aug 12 15:50:36.70: [ 1520]: --> [2:OK]
Aug 12 15:50:36.70: [ 1520]: <-- [10:AT+FTBC=0\r]
Aug 12 15:50:36.82: [ 1520]: --> [2:OK]
Aug 12 15:50:36.82: [ 1520]: <-- [10:AT+FBOR=0\r]
Aug 12 15:50:36.94: [ 1520]: --> [2:OK]
Aug 12 15:50:36.94: [ 1520]: <-- [13:AT+FPHCTO=30\r]
Aug 12 15:50:37.06: [ 1520]: --> [2:OK]
Aug 12 15:50:37.06: [ 1520]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Aug 12 15:50:37.18: [ 1520]: --> [2:OK]
Aug 12 15:50:37.18: [ 1520]: <-- [22:AT+FLID="+6072381809"\r]
Aug 12 15:50:37.30: [ 1520]: --> [2:OK]
Aug 12 15:50:37.30: [ 1520]: DIAL xxxxxx
Aug 12 15:50:37.30: [ 1520]: <-- [12:ATDTxxxxxxx\r]
Aug 12 15:50:47.98: [ 1520]: --> [5:+FCON]
Aug 12 15:50:50.25: [ 1520]: --> [29:+FCSI: "         xxxxxxxx"]
Aug 12 15:50:50.25: [ 1520]: REMOTE CSI "xxxxxxxxx"
Aug 12 15:50:50.56: [ 1520]: --> [22:+FDIS: 1,5,0,2,1,0,0,0]
Aug 12 15:50:50.67: [ 1520]: --> [2:OK]
Aug 12 15:50:50.67: [ 1520]: REMOTE best rate 14400 bit/s
Aug 12 15:50:50.67: [ 1520]: REMOTE max page width 1728 pixels in 215 mm
Aug 12 15:50:50.67: [ 1520]: REMOTE max unlimited page length
Aug 12 15:50:50.67: [ 1520]: REMOTE best vres 7.7 line/mm
Aug 12 15:50:50.67: [ 1520]: REMOTE best format 2-D MR
Aug 12 15:50:50.67: [ 1520]: REMOTE best 0 ms/scanline
Aug 12 15:50:50.67: [ 1520]: USE 14400 bit/s
Aug 12 15:50:50.67: [ 1520]: USE 0 ms/scanline
Aug 12 15:50:50.67: [ 1520]: SEND file "docq/doc4.ps;01"
Aug 12 15:50:50.67: [ 1520]: USE page width 1728 pixels in 215 mm
Aug 12 15:50:50.67: [ 1520]: USE unlimited page length
Aug 12 15:50:50.67: [ 1520]: USE 7.7 line/mm
Aug 12 15:50:50.67: [ 1520]: USE 1-D MR
Aug 12 15:50:50.67: [ 1520]: <-- [24:AT+FDIS=1,5,0,2,0,0,0,0\r]
Aug 12 15:50:50.80: [ 1520]: --> [2:OK]
Aug 12 15:50:50.80: [ 1520]: <-- [7:AT+FDT\r]
Aug 12 15:50:58.93: [ 1520]: --> [22:+FDCS: 1,5,0,2,0,0,0,0]
Aug 12 15:50:58.93: [ 1520]: --> [7:CONNECT]
Aug 12 15:50:58.93: [ 1520]: SEND wait for XON
Aug 12 15:50:58.93: [ 1520]: --> [1:]
Aug 12 15:50:58.93: [ 1520]: SEND begin page
Aug 12 15:51:10.81: [ 1520]: SENT 23461 bytes of data
Aug 12 15:51:12.13: [ 1520]: SEND end page
Aug 12 15:51:12.98: [ 1520]: --> [2:OK]
Aug 12 15:51:12.98: [ 1520]: SEND send EOP (no more pages or documents)
Aug 12 15:51:12.98: [ 1520]: <-- [9:AT+FET=2\r]
Aug 12 15:51:26.61: [ 1520]: --> [9:+FHNG: 54]
Aug 12 15:51:26.61: [ 1520]: REMOTE HANGUP: No response to EOP repeated 3 times (code 54)
Aug 12 15:51:26.61: [ 1520]: <-- [5:ATH0\r]
Aug 12 15:51:27.31: [ 1520]: --> [2:OK]
Aug 12 15:51:27.31: [ 1520]: SESSION END

----end transcript---

 

 

Cheers,
Keng Heng. Chan
http://www.mysql.cc

 

--
The quick brown fox jump over the lazy dog.