[hylafax-users] Failure to train w/ +FCERROR?

To: <hylafax-users@hylafax.org>
Subject: [hylafax-users] Failure to train w/ +FCERROR?
From: "John E.P. Hynes" <john@hytronix.com>
Date: Mon, 11 Aug 2003 15:32:38 -0400
Greetings,

Most faxes are recieved no problem (like 200 a day).  However, one
particular sender we can't recieve from.  I don't know what fax machine they
have, but we're using MultiTech MT5634ZBA, in class 1. (Class 2 was pretty
buggy, it seems...)

Any ideas?

Here's the log:

Aug 11 08:09:55.25: [ 9960]: SESSION BEGIN 00000605 16034338661

Aug 11 08:09:55.25: [ 9960]: HylaFAX (tm) Version 4.1.5

Aug 11 08:09:55.25: [ 9960]: <-- [4:ATA\r]

Aug 11 08:10:01.44: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:01.44: [ 9960]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'

Aug 11 08:10:01.44: [ 9960]: RECV FAX: begin

Aug 11 08:10:01.44: [ 9960]: <-- data [23]

Aug 11 08:10:01.44: [ 9960]: <-- data [2]

Aug 11 08:10:01.47: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:01.47: [ 9960]: <-- data [10]

Aug 11 08:10:01.47: [ 9960]: <-- data [2]

Aug 11 08:10:02.68: [ 9960]: --> [2:OK]

Aug 11 08:10:02.68: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:05.78: [ 9960]: --> [0:]

Aug 11 08:10:05.78: [ 9960]: MODEM <Empty line>

Aug 11 08:10:05.78: [ 9960]: <-- data [1]

Aug 11 08:10:05.79: [ 9960]: --> [2:]

Aug 11 08:10:05.79: [ 9960]: --> [2:OK]

Aug 11 08:10:05.79: [ 9960]: DELAY 1500 ms

Aug 11 08:10:07.29: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:08.16: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:08.16: [ 9960]: <-- data [23]

Aug 11 08:10:08.16: [ 9960]: <-- data [2]

Aug 11 08:10:08.19: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:08.19: [ 9960]: <-- data [10]

Aug 11 08:10:08.19: [ 9960]: <-- data [2]

Aug 11 08:10:09.40: [ 9960]: --> [2:OK]

Aug 11 08:10:09.40: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:09.51: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:11.22: [ 9960]: --> [2:OK]

Aug 11 08:10:11.22: [ 9960]: REMOTE TSI "18147232248"

Aug 11 08:10:11.22: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:11.24: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:11.48: [ 9960]: --> [2:OK]

Aug 11 08:10:11.48: [ 9960]: REMOTE wants 9600 bit/s

Aug 11 08:10:11.48: [ 9960]: REMOTE wants page width 1728 pixels in 215 mm

Aug 11 08:10:11.48: [ 9960]: REMOTE wants unlimited page length

Aug 11 08:10:11.48: [ 9960]: REMOTE wants 3.85 line/mm

Aug 11 08:10:11.48: [ 9960]: REMOTE wants 2-D MR

Aug 11 08:10:11.48: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:11.62: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:13.34: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:13.34: [ 9960]: RECV training at v.29 9600 bit/s

Aug 11 08:10:13.34: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:16.53: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:16.53: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:16.72: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:16.72: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:16.85: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:16.85: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:17.01: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:17.01: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:17.17: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:17.17: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:17.33: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:17.33: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:17.84: [ 9960]: --> [0:]

Aug 11 08:10:17.84: [ 9960]: MODEM <Empty line>

Aug 11 08:10:17.84: [ 9960]: <-- data [1]

Aug 11 08:10:17.85: [ 9960]: --> [2:]

Aug 11 08:10:17.85: [ 9960]: --> [2:OK]

Aug 11 08:10:17.85: [ 9960]: DELAY 75 ms

Aug 11 08:10:17.93: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:18.80: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:18.80: [ 9960]: <-- data [3]

Aug 11 08:10:18.80: [ 9960]: <-- data [2]

Aug 11 08:10:19.12: [ 9960]: --> [2:OK]

Aug 11 08:10:19.12: [ 9960]: TRAINING failed

Aug 11 08:10:19.12: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:19.31: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:20.21: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:20.21: [ 9960]: MODEM No carrier

Aug 11 08:10:20.21: [ 9960]: DELAY 1500 ms

Aug 11 08:10:21.71: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:22.58: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:22.58: [ 9960]: <-- data [23]

Aug 11 08:10:22.58: [ 9960]: <-- data [2]

Aug 11 08:10:22.61: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:22.61: [ 9960]: <-- data [10]

Aug 11 08:10:22.61: [ 9960]: <-- data [2]

Aug 11 08:10:23.82: [ 9960]: --> [2:OK]

Aug 11 08:10:23.82: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:23.92: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:25.64: [ 9960]: --> [2:OK]

Aug 11 08:10:25.64: [ 9960]: REMOTE TSI "18147232248"

Aug 11 08:10:25.64: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:25.66: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:25.90: [ 9960]: --> [2:OK]

Aug 11 08:10:25.90: [ 9960]: REMOTE wants 9600 bit/s

Aug 11 08:10:25.90: [ 9960]: REMOTE wants page width 1728 pixels in 215 mm

Aug 11 08:10:25.90: [ 9960]: REMOTE wants unlimited page length

Aug 11 08:10:25.90: [ 9960]: REMOTE wants 3.85 line/mm

Aug 11 08:10:25.90: [ 9960]: REMOTE wants 2-D MR

Aug 11 08:10:25.90: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:26.04: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:27.75: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:27.75: [ 9960]: RECV training at v.29 9600 bit/s

Aug 11 08:10:27.75: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:30.94: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:30.94: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:31.13: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:31.13: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:31.29: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:31.29: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:31.45: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:31.45: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:31.61: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:31.61: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:31.77: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:31.77: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:32.25: [ 9960]: --> [0:]

Aug 11 08:10:32.25: [ 9960]: MODEM <Empty line>

Aug 11 08:10:32.25: [ 9960]: <-- data [1]

Aug 11 08:10:32.26: [ 9960]: --> [2:]

Aug 11 08:10:32.26: [ 9960]: --> [2:OK]

Aug 11 08:10:32.26: [ 9960]: DELAY 75 ms

Aug 11 08:10:32.34: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:33.21: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:33.21: [ 9960]: <-- data [3]

Aug 11 08:10:33.21: [ 9960]: <-- data [2]

Aug 11 08:10:33.53: [ 9960]: --> [2:OK]

Aug 11 08:10:33.53: [ 9960]: TRAINING failed

Aug 11 08:10:33.53: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:33.72: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:34.62: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:34.62: [ 9960]: MODEM No carrier

Aug 11 08:10:34.62: [ 9960]: DELAY 1500 ms

Aug 11 08:10:36.12: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:36.99: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:36.99: [ 9960]: <-- data [23]

Aug 11 08:10:36.99: [ 9960]: <-- data [2]

Aug 11 08:10:37.02: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:37.02: [ 9960]: <-- data [10]

Aug 11 08:10:37.02: [ 9960]: <-- data [2]

Aug 11 08:10:38.23: [ 9960]: --> [2:OK]

Aug 11 08:10:38.23: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:38.33: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:40.04: [ 9960]: --> [2:OK]

Aug 11 08:10:40.04: [ 9960]: REMOTE TSI "18147232248"

Aug 11 08:10:40.04: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:40.06: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:40.30: [ 9960]: --> [2:OK]

Aug 11 08:10:40.30: [ 9960]: REMOTE wants 9600 bit/s

Aug 11 08:10:40.30: [ 9960]: REMOTE wants page width 1728 pixels in 215 mm

Aug 11 08:10:40.30: [ 9960]: REMOTE wants unlimited page length

Aug 11 08:10:40.30: [ 9960]: REMOTE wants 3.85 line/mm

Aug 11 08:10:40.30: [ 9960]: REMOTE wants 2-D MR

Aug 11 08:10:40.30: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:40.44: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:42.15: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:42.15: [ 9960]: RECV training at v.29 9600 bit/s

Aug 11 08:10:42.15: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:45.34: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:45.34: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:45.47: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:45.47: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:45.63: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:45.63: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:45.79: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:45.79: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:45.95: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:45.95: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:46.11: [ 9960]: --> [8:+FCERROR]

Aug 11 08:10:46.11: [ 9960]: <-- [10:AT+FRM=96\r]

Aug 11 08:10:46.65: [ 9960]: --> [0:]

Aug 11 08:10:46.65: [ 9960]: MODEM <Empty line>

Aug 11 08:10:46.65: [ 9960]: <-- data [1]

Aug 11 08:10:46.66: [ 9960]: --> [2:]

Aug 11 08:10:46.66: [ 9960]: --> [2:OK]

Aug 11 08:10:46.66: [ 9960]: DELAY 75 ms

Aug 11 08:10:46.74: [ 9960]: <-- [9:AT+FTH=3\r]

Aug 11 08:10:47.61: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:47.61: [ 9960]: <-- data [3]

Aug 11 08:10:47.61: [ 9960]: <-- data [2]

Aug 11 08:10:47.93: [ 9960]: --> [2:OK]

Aug 11 08:10:47.93: [ 9960]: TRAINING failed

Aug 11 08:10:47.93: [ 9960]: <-- [9:AT+FRH=3\r]

Aug 11 08:10:48.12: [ 9960]: --> [7:CONNECT]

Aug 11 08:10:49.01: [ 9960]: --> [10:NO CARRIER]

Aug 11 08:10:49.01: [ 9960]: MODEM No carrier

Aug 11 08:10:49.01: [ 9960]: RECV FAX: Failure to train modems

Aug 11 08:10:49.01: [ 9960]: RECV FAX: end

Aug 11 08:10:49.01: [ 9960]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
Follow-Ups:
- Re: [hylafax-users] Failure to train w/ +FCERROR?
  - From: Lee Howard
Prev by Date: [hylafax-users] Outlook Contacts and Cypheus
Next by Date: Re: [hylafax-users] Failure to train w/ +FCERROR?
Previous by thread: Re: [hylafax-users] Outlook Contacts and Cypheus
Next by thread: Re: [hylafax-users] Failure to train w/ +FCERROR?
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services