Re: [hylafax-users] Routing through DTMF

[Lee Howard <faxguy@howardsilvan.com>]

On 2003.08.05 10:03 Fred Ramos wrote:
> Hello There,
> 
> I am trying to implement received fax routing with Hylafax. I am
> looking
> after a DTMF based solution, as I can make my central forward the
> dialed
> extension to me as a DTMF sequence. The plan would be to capture the
> DTMF, record the destination extension, receive the fax and them send
> it
> through email to the corresponding user in a extension/email table.
> 
> Does anybody else has ever done this before ? Am I in the right path ?

You have to use a modem that can capture that DTMF.  The MultiTech 
MT1932ZDX could, and you'd follow the pattern discussed on

http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=374

New MultiTechs don't appear to support the ">" command, but if you can 
get the DTMF to run down a separate line from the dial-tone (or even 
just splitting the line) then you could use the MT5634ZBA-DID and hook 
the DTMF line up to the DID port, and configure the modem and HylaFAX 
appropriately.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*