Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Solaris Problems



Hi Steve,

Thanks for the advice. You were right, the GNU strip was the one being 
used during compilation. Fixed the path and everything now works.

David

Mitchell, Steve wrote:
> Hi David,
>  
> I just signed up for the hylafax email list, so I couldn't respond to 
> your post the correct way.
> I too had the same error you talked about below and on our Solaris 
> system it was a problem with the "strip" command.
> Do a "which strip" from the command line and if it shows the gnu version 
> "/usr/local/bin/strip", then this might be the problem.
> The gnu version of strip doesn't work for some reason. You have to use 
> the "/usr/ccs/bin/strip" version. So adjust your PATH to have 
> "/usr/ccs/bin" before "/usr/local/bin" and do another "make install" and 
> hopefully that should work.
>  
> Steve M
> 
> 
>   [hylafax-users] Solaris Problems
> 
> ------------------------------------------------------------------------
> 
>     * /To/: hylafax-users@hylafax.org <mailto:hylafax-users@hylafax.org>
>     * /Subject/: [hylafax-users] Solaris Problems
>     * /From/: David Beards <d.beards@cfa.vic.gov.au
>       <mailto:d.beards@cfa.vic.gov.au>>
>     * /Date/: Mon, 09 Jun 2003 17:53:37 +1000 
> 
> ------------------------------------------------------------------------
> 
> Hi Everyone,
> 
> I'm in the process of setting up HylaFAX on a test system and I've hit a 
> small problem which I am having difficulties in resolving.
> 
> The system set up is a SPARC 2 running Solaris 7 with gcc v2.95.3. The 
> source compiles with no problems, but when the faxsetup program starts 
> the hfaxd and other programs at the end I get the error 'Cannot find ELF'.
> 
> Same thing when the faxaddmodem script is run. Whenever lockname or 
> ondelay are executed I get the error 'Cannot find ELF'.
> 
> I feel I'm missing a package or something in the setup of my server, but 
> I'm stumped as to what it might be. (UUCP is installed and using cu I 
> can communicate with the modem no problems.)
> 
> Any and all help would be most appreciated.
> 
> Regards,
> 
> David Beards
> Technical Manager Networks and Systems
> CFA
> 
>  
>  
> *Steve Mitchell*
> Enterprise Computing Technical Support
> ICBC - Victoria
> Phone: 250.414.7657  Fax: 250.978.8003  Cel: 250.889.2886
>  

-- 
David Beards
Technical Manager Networks and Systems
CFA

Ph:  +61 3 9262 8204
FAX: +61 3 9262 8383
Mob: 0419 519 366


CAUTION - This message is intended for the use of the individual or
entity named above and may contain information that is confidential or
privileged.  If you are not the intended recipient of this message you
are hereby notified that any use, dissemination, distribution or
reproduction of this message is prohibited and that you must not take
any action in reliance on it.  If you have received this communication
in error, please notify CFA immediately and destroy the original
message.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services