|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] 4.1.5 - 2DMMR progress?
On 2003.06.08 21:05 Karl Denninger wrote:
> Any news on the corruption problem?
HylaFAX 4.1.5 didn't support MMR which is why MMR faxes that HylaFAX
was coerced into receiving would be corrupted by HylaFAX's TIFF-writing
routines.
HylaFAX 4.1.6 will support MMR reception completely with any Class 2
modem that supports it. You can get your pre-release copy today by
checking out CVS... since all the fixins are all ready in place there.
As for analog fax modems out there that even support MMR with their
Class 2 firmware, I'm only aware of two: the newer MultiTech 5634
series (including external VBAs, internal ZPXs, and multiport ISIs -
but all should be using current firmware) and the Digi Acceleport RAS
(which are much more expensive than the MultiTech counterparts). So
for everyone else, HylaFAX Class 2 MMR support should be meaningless...
unless they plan to get a new modem.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
