|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Repeat faxes
Hey guys, I'm a new user of Hylafax and wow, I'm impressed with the
software!
I have, however, run into a small problem. I'm faxing mostly Postscript
files out and it seems to work great but they keep getting sent over
and over again until I kill the job. I'm confused by the session log's
"No Carrier detected" because in every case the fax comes through
beautifully.
Could there be something simple I'm just not doing? Configuration is
all default and I've gone over the install instructions several times
trying to make sure I didn't miss anything.. Transcript of the session
is attached (with the phone number changed). Thanks!!
Could someone beat me with a clue stick?
May 30 15:39:56.21: [ 150]: SESSION BEGIN 00000015 16065558311
May 30 15:39:56.21: [ 150]: HylaFAX (tm) Version 4.1.5
May 30 15:39:56.21: [ 150]: SEND FAX: JOB 6 DEST 16063248311 COMMID
00000015 DEVICE '/dev/cuaa0'
May 30 15:39:56.21: [ 150]: DELAY 75 ms
May 30 15:39:56.29: [ 150]: DELAY 2600 ms
May 30 15:39:58.90: [ 150]: DELAY 10 ms
May 30 15:39:58.92: [ 150]: <-- [4:ATZ\r]
May 30 15:39:59.40: [ 150]: --> [3:ATZ]
May 30 15:39:59.40: [ 150]: --> [2:OK]
May 30 15:39:59.40: [ 150]: DELAY 3000 ms
May 30 15:40:02.41: [ 150]: <-- [5:ATE0\r]
May 30 15:40:02.57: [ 150]: --> [4:ATE0]
May 30 15:40:02.57: [ 150]: --> [2:OK]
May 30 15:40:02.57: [ 150]: <-- [5:ATV1\r]
May 30 15:40:02.73: [ 150]: --> [2:OK]
May 30 15:40:02.73: [ 150]: <-- [5:ATQ0\r]
May 30 15:40:02.89: [ 150]: --> [2:OK]
May 30 15:40:02.89: [ 150]: <-- [7:ATS0=0\r]
May 30 15:40:03.06: [ 150]: --> [2:OK]
May 30 15:40:03.06: [ 150]: <-- [7:ATS8=2\r]
May 30 15:40:03.23: [ 150]: --> [2:OK]
May 30 15:40:03.23: [ 150]: <-- [8:ATS7=60\r]
May 30 15:40:03.40: [ 150]: --> [2:OK]
May 30 15:40:03.40: [ 150]: <-- [6:AT&E4\r]
May 30 15:40:03.57: [ 150]: --> [2:OK]
May 30 15:40:03.57: [ 150]: <-- [6:AT&D3\r]
May 30 15:40:03.74: [ 150]: --> [2:OK]
May 30 15:40:03.74: [ 150]: <-- [6:AT&C1\r]
May 30 15:40:03.91: [ 150]: --> [2:OK]
May 30 15:40:03.91: [ 150]: <-- [12:AT+FCLASS=2\r]
May 30 15:40:04.08: [ 150]: --> [2:OK]
May 30 15:40:04.08: [ 150]: <-- [10:AT+FTBC=0\r]
May 30 15:40:04.25: [ 150]: --> [2:OK]
May 30 15:40:04.25: [ 150]: <-- [10:AT+FBOR=0\r]
May 30 15:40:04.42: [ 150]: --> [2:OK]
May 30 15:40:04.42: [ 150]: <-- [13:AT+FPHCTO=30\r]
May 30 15:40:04.59: [ 150]: --> [2:OK]
May 30 15:40:04.59: [ 150]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
May 30 15:40:04.77: [ 150]: --> [2:OK]
May 30 15:40:04.77: [ 150]: <-- [5:ATM0\r]
May 30 15:40:04.93: [ 150]: --> [2:OK]
May 30 15:40:04.94: [ 150]: <-- [12:AT+FCLASS=2\r]
May 30 15:40:05.20: [ 150]: --> [2:OK]
May 30 15:40:05.20: [ 150]: <-- [10:AT+FTBC=0\r]
May 30 15:40:05.47: [ 150]: --> [2:OK]
May 30 15:40:05.47: [ 150]: <-- [10:AT+FBOR=0\r]
May 30 15:40:05.74: [ 150]: --> [2:OK]
May 30 15:40:05.74: [ 150]: <-- [13:AT+FPHCTO=30\r]
May 30 15:40:06.01: [ 150]: --> [2:OK]
May 30 15:40:06.01: [ 150]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
May 30 15:40:06.29: [ 150]: --> [2:OK]
May 30 15:40:06.29: [ 150]: <-- [17:AT+FLID="modem1"\r]
May 30 15:40:06.56: [ 150]: --> [2:OK]
May 30 15:40:06.57: [ 150]: DIAL 16065558311
May 30 15:40:06.57: [ 150]: <-- [16:ATDT16065558311\r]
May 30 15:41:12.15: [ 150]: --> [10:NO CARRIER]
May 30 15:41:12.15: [ 150]: SEND FAILED: JOB 6 DEST 16065558311 ERR No
carrier detected
May 30 15:41:12.15: [ 150]: <-- [5:ATH0\r]
May 30 15:41:12.42: [ 150]: --> [2:OK]
May 30 15:41:12.42: [ 150]: SESSION END
-Mitch
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
