Re: [hylafax-users] set the modem rate @9600 only

["Darren Nickerson" <darren.nickerson@ifax.com>]

Daniel,

Does the following excerpt from the sendfax man page help?

       -B speed    Try  to transmit facsimile documents using the
                   desired signalling rate.  Possible speeds are:
                   2400,  4800,  7200, 9600, 12000, 14400, 16800,
                   19200, 21600, 24000, 26400, 28800, 31200,  and
                   33600.  If the specified speed is greater than
                   the transmitting modem or receiver is  capable
                   of,  it  is  reduced  to  the highest possible
                   speed  both  devices  support.    By   default
                   HylaFAX  will  use  the  fastest possible rate
                   supported  by  the  transmitting   modem   and
                   receiving  facsimile device (unless restricted
                   by other server  configuration);  this  option
                   can  be  used  to reduce the speed.  Note that
                   international calls are frequently more  reli­
                   able when transmissions are restricted to 9600
                   bits/second.

The HylaFAX man pages are excellent - and they make excellent bedtime
reading ;-)

-Darren

--
Darren Nickerson
Senior Sales & Support Engineer
iFax Solutions, Inc. www.ifax.com
darren.nickerson@ifax.com
+1.215.438.4638
----- Original Message ----- 
From: "Danielh" <danielh@uniexchange.com>
To: <hylafax-users@hylafax.org>
Sent: Tuesday, May 13, 2003 11:37 AM
Subject: [hylafax-users] set the modem rate @9600 only


> Hi! anyone can tell me how to set the maximum rate 9600 for fax
transmission
> on hylafax? Thanks!
>
> Daniel
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*