[hylafax-users] faxstat not recognizing modem

["Michael Lai" <mk_lai@netfront.net>]

When I run faxstat to test my Hylafax installation, I get the following response:

HylaFAX scheduler on Fileserver: Running

But it doesn't mention anything about the modem running.  I have ran
faxaddmodem and it detected my modem at ttyS2.  Here is the config.ttyS2 script:

CountryCode:		852
AreaCode:		
FAXNumber:		XXXXXXXX
LongDistancePrefix:	1
InternationalPrefix:	666
DialStringRules:	etc/dialrules
#ServerTracing:		1
ServerTracing		0xFFF
SessionTracing:		11
LogFacility		syslog
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3		# product information
#
ModemDialCmd:		ATDT%s		# T for tone dialing

I have also ran nmap and port 4559 is running.  What am I doing wrong?  Thanks
for any possible help.
--
Netfront - The Quality ISP - http://www.netfront.net/


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*