[hylafax-users] Auslinx Tasmanian Devil 336e

[Jeff Litchfield <jeff@pipenetworks.com>]

Hi everyone!

Been having a duce of a time trying to get an
Auslinx Tasmanian Devil 336e to run on Hylafax....

here are the stats:

    Hylafax v4.1.5 under RedHat7.3,

    AUSLINX/TASMANIAN DEVIL336
    V1.510.07-V34_DS

    Rockwell Chipset -
    RCV288DPi Rev 05BA



It works well with the fax machine at work, but
not the home one, which is a:

Panasonic kx-fp-121

It manages to get the first page, but not the other pages....

Here is an example log:

Apr 08 18:04:10.54: [ 4016]: SESSION BEGIN 00000064 61761732201800
Apr 08 18:04:10.54: [ 4016]: HylaFAX (tm) Version 4.1.5
Apr 08 18:04:10.54: [ 4016]: <-- [4:ATA\r]
Apr 08 18:04:18.81: [ 4016]: --> [5:+FCON]
Apr 08 18:04:18.81: [ 4016]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Apr 08 18:04:18.81: [ 4016]: RECV FAX: begin
Apr 08 18:04:20.05: [ 4016]: --> [22:+FDCS: 0,5,0,2,1,0,0,0]
Apr 08 18:04:20.05: [ 4016]: REMOTE wants 14400 bit/s
Apr 08 18:04:20.05: [ 4016]: REMOTE wants page width 1728 pixels in 215 mm
Apr 08 18:04:20.05: [ 4016]: REMOTE wants unlimited page length
Apr 08 18:04:20.05: [ 4016]: REMOTE wants 3.85 line/mm
Apr 08 18:04:20.05: [ 4016]: REMOTE wants 2-D MR
Apr 08 18:04:20.17: [ 4016]: --> [2:OK]
Apr 08 18:04:20.17: [ 4016]: <-- [7:AT+FDR\r]
Apr 08 18:04:23.11: [ 4016]: --> [5:+FCFR]
Apr 08 18:04:25.26: [ 4016]: --> [22:+FDCS: 0,5,0,2,1,0,0,0]
Apr 08 18:04:25.26: [ 4016]: REMOTE wants 14400 bit/s
Apr 08 18:04:25.26: [ 4016]: REMOTE wants page width 1728 pixels in 215 mm
Apr 08 18:04:25.26: [ 4016]: REMOTE wants unlimited page length
Apr 08 18:04:25.26: [ 4016]: REMOTE wants 3.85 line/mm
Apr 08 18:04:25.26: [ 4016]: REMOTE wants 2-D MR
Apr 08 18:04:25.26: [ 4016]: --> [7:CONNECT]
Apr 08 18:04:25.26: [ 4016]: RECV: begin page
Apr 08 18:04:25.26: [ 4016]: RECV: send trigger 022
Apr 08 18:04:46.65: [ 4016]: RECV: 1158 total lines, 0 bad lines, 0 
consecutive bad lines
Apr 08 18:04:46.65: [ 4016]: --> [17:+FPTS: 2,2219,0,0]
Apr 08 18:04:47.93: [ 4016]: --> [7:+FET: 0]
Apr 08 18:04:47.93: [ 4016]: RECV recv MPS (more pages, same document)
Apr 08 18:04:48.04: [ 4016]: --> [2:OK]
Apr 08 18:04:48.04: [ 4016]: RECV send MCF (message confirmation)
Apr 08 18:04:48.04: [ 4016]: RECV FAX (00000064): from , page 1 in 0:28, 
INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 08 18:04:48.04: [ 4016]: <-- [7:AT+FDR\r]
Apr 08 18:04:50.90: [ 4016]: --> [8:+FHNG: 0]
Apr 08 18:04:50.90: [ 4016]: REMOTE HANGUP: Normal and proper end of 
connection (code 0)
Apr 08 18:04:50.90: [ 4016]: RECV FAX (00000064): recvq/fax00052.tif from , 
route to <unspecified>, 1 pages in 0:32
Apr 08 18:04:50.90: [ 4016]: RECV FAX: Normal and proper end of connection
Apr 08 18:04:50.90: [ 4016]: RECV FAX (00000064): session with  terminated 
abnormally: Normal and proper end of connection
Apr 08 18:04:50.90: [ 4016]: RECV FAX: bin/faxrcvd "recvq/fax00052.tif" 
"ttyS1" "00000064" "Normal and proper end of connection" "" ""


If anyone has worked with the Devils before and got them to receive 
multipage faxes,
please do send through your solution... this one is driving me batty!


Jefferson Litchfield
phone : 07 3220 1100
fax   : 07 3220 1800
______________________________________
PIPE Networks/IX Services Australia disclaimer

The above email should be read in conjunction with our standard
disclaimer/terms which can be found at :

http://www.pipenetworks.com/docs/disclaimer.htm


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*