|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] HF v 4.1.5 problems
After reading everything I can find and googleing for hours I feel I
need to ask for help on my first hylafax install.
We are wanting to set up a receive only system at this time. I see that
the sportsters seem to have difficulties but apparently they work as
class 1 devices. Is that correct? I am sure the issue si going to be
some boneheaded thing that I have missed but I sure would like to find
it. ( my estimate to set this up was 8 hours and I am getting close :(
any tips appreciated.
Specifics:
Redhat 8.0
hylafax installed from binary rpm hylafax-4.1.5-1rh8.i386.rpm
External USR sportster 56K faxmodem modem:
from ati7 in minicom
ati7
Configuration Profile...
Product type US/Canada External
Options V32bis,V.34+,x2
Fax Options Class 1/Class 2.0
Line Options Caller ID, Distinctive Ring
Clock Freq 92.0Mhz
Eprom 256k
Ram 64k
EPROM date 2/20/97
DSP date 2/20/97
EPROM rev 4.0.1 DSP rev 10.2.1 OK
The issue is that after running faxsetup and adding the faxgetty line
to /etc/inittab :
t2:23:respawn:/usr/sbin/faxgetty ttyS0
and running
telinit q
and then starting the service with
service hylafax start
[root@sambatest bhughes]# service hylafax start
Starting HylaFAX queue manager (faxq): [ OK ]
Starting HylaFAX server (hfaxd): ar/log/messages [ OK ]
Restarting HylaFAX modem manager (faxgetty): [ OK ]
faxstat reports :
[root@sambatest bhughes]# faxstat
HylaFAX scheduler on sambatest.internal.stanfieldodell.com: Running
Modem ttyS0 (+1.918.664-4119): Waiting for modem to come free
I can't get the modem to initialize. I think I have set the logging as
high as it goes but all I get in /var/log/messages is the following:
Mar 20 14:57:10 sambatest FaxQueuer[14043]: HylaFAX (tm) Version 4.1.5
Mar 20 14:57:10 sambatest hylafax: faxq startup succeeded
Mar 20 14:57:10 sambatest FaxQueuer[14043]: Copyright (c) 1990-1996 Sam
Leffler
Mar 20 14:57:10 sambatest FaxQueuer[14043]: Copyright (c) 1991-1996
Silicon Graphics, Inc.
Mar 20 14:57:10 sambatest HylaFAX[14047]: HylaFAX INET Protocol Server:
restarted.
Mar 20 14:57:10 sambatest hylafax: hfaxd startup succeeded
Mar 20 14:57:10 sambatest FaxGetty[14034]: CAUGHT SIGNAL 15
Mar 20 14:57:10 sambatest FaxGetty[14034]: CLOSE /dev/ttyS0
Mar 20 14:57:10 sambatest FaxGetty[14054]: OPEN /dev/ttyS0 HylaFAX (tm)
Version 4.1.5
Mar 20 14:57:10 sambatest FaxGetty[14054]: /dev/ttyS0: Can not lock
device.
Mar 20 14:57:10 sambatest FaxGetty[14054]: STATE CHANGE: BASE ->
LOCKWAIT (timeout 30)
Mar 20 14:57:10 sambatest hylafax: faxgetty shutdown succeeded
Mar 20 14:57:16 sambatest HylaFAX[14060]: servertracing = 0xFFF (line
57)
Mar 20 14:57:16 sambatest HylaFAX[14060]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 14:57:16 sambatest HylaFAX[14060]: USER root
Mar 20 14:57:16 sambatest HylaFAX[14060]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 14:57:16 sambatest HylaFAX[14060]: PORT 127.0.0.1;23300
Mar 20 14:57:16 sambatest HylaFAX[14060]: LIST status
Mar 20 14:57:23 sambatest HylaFAX[14062]: servertracing = 0xFFF (line
57)
Mar 20 14:57:23 sambatest HylaFAX[14062]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 14:57:23 sambatest HylaFAX[14062]: USER root
Mar 20 14:57:23 sambatest HylaFAX[14062]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 14:57:23 sambatest HylaFAX[14062]: PORT 127.0.0.1;23812
Mar 20 14:57:23 sambatest HylaFAX[14062]: LIST status
Mar 20 14:57:24 sambatest HylaFAX[14064]: servertracing = 0xFFF (line
57)
Mar 20 14:57:24 sambatest HylaFAX[14064]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 14:57:24 sambatest HylaFAX[14064]: USER root
Mar 20 14:57:24 sambatest HylaFAX[14064]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 14:57:24 sambatest HylaFAX[14064]: PORT 127.0.0.1;24324
Mar 20 14:57:24 sambatest HylaFAX[14064]: LIST status
Mar 20 14:57:25 sambatest HylaFAX[14066]: servertracing = 0xFFF (line
57)
Mar 20 14:57:25 sambatest HylaFAX[14066]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 14:57:25 sambatest HylaFAX[14066]: USER root
Mar 20 14:57:25 sambatest HylaFAX[14066]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 14:57:25 sambatest HylaFAX[14066]: PORT 127.0.0.1;24836
Mar 20 14:57:25 sambatest HylaFAX[14066]: LIST status
Mar 20 14:57:25 sambatest HylaFAX[14068]: servertracing = 0xFFF (line
57)
Mar 20 14:57:25 sambatest HylaFAX[14068]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 14:57:25 sambatest HylaFAX[14068]: USER root
Mar 20 14:57:25 sambatest HylaFAX[14068]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 14:57:25 sambatest HylaFAX[14068]: PORT 127.0.0.1;25348
Mar 20 14:57:25 sambatest HylaFAX[14068]: LIST status
Mar 20 14:57:40 sambatest FaxGetty[14054]: Purge stale UUCP lock
/var/lock/LCK..ttyS0
Mar 20 14:57:40 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 14:57:40 sambatest FaxGetty[14054]: DELAY 75 ms
Mar 20 14:57:40 sambatest FaxGetty[14054]: MODEM set DTR ON
Mar 20 14:57:40 sambatest FaxGetty[14054]: DELAY 2600 ms
Mar 20 14:57:42 sambatest FaxGetty[14054]: MODEM set baud rate: 19200
baud, input flow XON/XOFF, output flow XON/XOFF
Mar 20 14:57:42 sambatest FaxGetty[14054]: DELAY 10 ms
Mar 20 14:57:42 sambatest FaxGetty[14054]: MODEM flush i/o
Mar 20 14:57:42 sambatest FaxGetty[14054]: <-- [4:ATZ\r]
Mar 20 14:58:12 sambatest FaxGetty[14054]: MODEM TIMEOUT: reading line
from modem
Mar 20 14:58:12 sambatest FaxGetty[14054]: MODEM <Timeout>
Mar 20 14:58:12 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 14:58:12 sambatest FaxGetty[14054]: DELAY 75 ms
Mar 20 14:58:12 sambatest FaxGetty[14054]: MODEM set DTR ON
Mar 20 14:58:12 sambatest FaxGetty[14054]: DELAY 2600 ms
Mar 20 14:58:15 sambatest FaxGetty[14054]: MODEM set baud rate: 19200
baud, input flow XON/XOFF, output flow XON/XOFF
Mar 20 14:58:15 sambatest FaxGetty[14054]: DELAY 10 ms
Mar 20 14:58:15 sambatest FaxGetty[14054]: MODEM flush i/o
Mar 20 14:58:15 sambatest FaxGetty[14054]: <-- [4:ATZ\r]
Mar 20 14:58:45 sambatest FaxGetty[14054]: MODEM TIMEOUT: reading line
from modem
Mar 20 14:58:45 sambatest FaxGetty[14054]: MODEM <Timeout>
Mar 20 14:58:45 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 14:58:45 sambatest FaxGetty[14054]: /dev/ttyS0: Can not
initialize modem.
Mar 20 14:58:45 sambatest FaxGetty[14054]: STATE CHANGE: LOCKWAIT ->
MODEMWAIT (timeout 30)
Mar 20 14:59:15 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 14:59:15 sambatest FaxGetty[14054]: DELAY 75 ms
Mar 20 14:59:15 sambatest FaxGetty[14054]: MODEM set DTR ON
Mar 20 14:59:15 sambatest FaxGetty[14054]: DELAY 2600 ms
Mar 20 14:59:18 sambatest FaxGetty[14054]: MODEM set baud rate: 19200
baud, input flow XON/XOFF, output flow XON/XOFF
Mar 20 14:59:18 sambatest FaxGetty[14054]: DELAY 10 ms
Mar 20 14:59:18 sambatest FaxGetty[14054]: MODEM flush i/o
Mar 20 14:59:18 sambatest FaxGetty[14054]: <-- [4:ATZ\r]
Mar 20 14:59:38 sambatest samba(pam_unix)[14071]: session opened for
user domain+jim by (uid=0)
Mar 20 14:59:48 sambatest FaxGetty[14054]: MODEM TIMEOUT: reading line
from modem
Mar 20 14:59:48 sambatest FaxGetty[14054]: MODEM <Timeout>
Mar 20 14:59:48 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 14:59:48 sambatest FaxGetty[14054]: DELAY 75 ms
Mar 20 14:59:48 sambatest FaxGetty[14054]: MODEM set DTR ON
Mar 20 14:59:48 sambatest FaxGetty[14054]: DELAY 2600 ms
Mar 20 14:59:50 sambatest FaxGetty[14054]: MODEM set baud rate: 19200
baud, input flow XON/XOFF, output flow XON/XOFF
Mar 20 14:59:50 sambatest FaxGetty[14054]: DELAY 10 ms
Mar 20 14:59:50 sambatest FaxGetty[14054]: MODEM flush i/o
Mar 20 14:59:50 sambatest FaxGetty[14054]: <-- [4:ATZ\r]
Mar 20 15:00:08 sambatest HylaFAX[14076]: servertracing = 0xFFF (line
57)
Mar 20 15:00:08 sambatest HylaFAX[14076]: HylaFAX INET connection from
localhost.localdomain [127.0.0.1]
Mar 20 15:00:08 sambatest HylaFAX[14076]: USER root
Mar 20 15:00:08 sambatest HylaFAX[14076]: FAX LOGIN FROM
localhost.localdomain [127.0.0.1], root
Mar 20 15:00:08 sambatest HylaFAX[14076]: PORT 127.0.0.1;26372
Mar 20 15:00:08 sambatest HylaFAX[14076]: LIST status
Mar 20 15:00:20 sambatest FaxGetty[14054]: MODEM TIMEOUT: reading line
from modem
Mar 20 15:00:20 sambatest FaxGetty[14054]: MODEM TIMEOUT: reading line
from modem
Mar 20 15:00:20 sambatest FaxGetty[14054]: MODEM <Timeout>
Mar 20 15:00:20 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 15:00:50 sambatest FaxGetty[14054]: MODEM set DTR OFF
Mar 20 15:00:50 sambatest FaxGetty[14054]: DELAY 75 ms
Mar 20 15:00:51 sambatest FaxGetty[14054]: MODEM set DTR ON
Mar 20 15:00:51 sambatest FaxGetty[14054]: DELAY 2600 ms
Mar 20 15:00:53 sambatest FaxGetty[14054]: MODEM set baud rate: 19200
baud, input flow XON/XOFF
...
Here are the config files:
[root@sambatest bhughes]# cd /var/spool/hylafax/etc/
[root@sambatest etc]# cat config
LogFacility: daemon
CountryCode: 1
AreaCode: 918
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
[root@sambatest etc]# cat config.ttyS0
# $Id: usr-xon,v 1.9 2002/09/13 16:55:15 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software
and
# its documentation for any purpose is hereby granted without fee,
provided
# that (i) the above copyright notices and this permission notice appear
in
# all copies of the software and related documentation, and (ii) the
names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY
OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
#
CountryCode: 1
AreaCode: 918
FAXNumber: +1.918.664-4119
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 0xFFF
RecvFileMode: 0644
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "Standfield and O'Dell"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use class 1 interface
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: xonxoff # hardware flow control
#
ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow control
ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow control
ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow control
ModemResultCodesCmd: ATQ0X4 # enable result codes
#
ModemMfrQueryCmd: !USR
ModemModelQueryCmd: ATI3
ModemRevQueryCmd: ATI7 # XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow control
Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware flow control
Class1SFLOCmd: "" # modem does this automatically
#
# This should resolve "DIS/DTC received 3 times" errors:
#
Class1ResponseWaitCmd: AT+FRS=1 # wait after sending TCF for response
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd: AT+FCLASS=0 # leave modem idling in class 0
ModemAnswerCmd: AT+FCLASS=1A # answer in Class 1
#
# Disables the reporting of bad frames by the modem. This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd: AT+FNR=1,1,1,0
[root@sambatest etc]#
I don't think I made any changes to the following:
[root@sambatest hylafax]# cd /etc/hylafax/
[root@sambatest hylafax]# cat hyla.conf
# hyla.conf
#
# This is the system-wide config file used by HylaFAX client programs:
# sendfax, faxstat, faxalter, faxmail, faxrm, sendpage, faxwatch,
# textfmt.
# The per-user config file is ~/.hylarc, which has the same syntax of
# hyla.conf.
#
# Below you find some examples. Read the man pages of the HylaFAX client
# programs for a complete list of the parameters that can be used in
this file.
#
# Vertical resolution for outgoing faxes.
# Default is 98 lines/inch, aka 'low', better is 196 lines/inch, aka
'fine'.
# Equivalent to 'sendfax' -l and -m options.
VRes: 196
# KillTime: time before expiring a job.
# Default is 3 hours. Equivalent to 'sendfax' -k option.
# Tipically this is needed when bulk faxing.
#KillTime: "now +24 hours" # Give jobs 24h before expiring them
# Notify policy (for outgoing faxes).
# Default is to notify only in case of problems. Equivalent to 'sendfax'
# -D option.
#Notify: Done # Notify even for succesfully sent jobs
# 'faxstat' output
# Uncomment this to change the format of 'faxstat' output to show the
# date/time the faxes will be/have been transmitted.
#JobFmt: "%-4j %-19Y %1a %6.6o %-14.14e %5P %5D %.25s" # faxstat -sdl
output
# Network HylaFAX server: redirect all client commands to an HylaFAX
server.
# Uncomment this if this system has no fax-modems connected to it, and
there
# is an HylaFAX server on your network. Equivalent to 'sendfax' -h
option.
#Host: faxserver.mydomain.dom
# Pagesize; RPM default is 'a4'
#PageSize: letter
# Disable PageChopping. Default is to chop.
#PageChop: none # Avoid page chopping
# Cover page date format.
#DateFormat: "%d/%m/%Y %H:%M:%S" # 'European style' (day, month,
year)
[root@sambatest hylafax]#
[root@sambatest hylafax]# cat hfaxd.conf
#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file. Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility: daemon # syslog facility (want this 1st))
ServerTracing: 0xFFF # just server operation
#IdleTimeout: 900 # initial client idle timeout (secs)
#MaxIdleTimeout: 7200 # max client idle timeout (secs)
#MaxLoginAttempts: 5 # max # login attempts before disconnect
#MaxAdminAttempts: 5 # max # admin attempts before disconnect
#MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect
#FaxContact: FaxMaster # who gets questions/complaints
#UserAccessFile: "/etc/hosts.hfaxd" # user+host access control file
#ShutdownFile: "/etc/shutdown" # server shutdown control filename
#XferLogFile: "/etc/clientlog" # for logging client file transfers
#FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
#JobFmt: "%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
#RcvFmt: "%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
#ModemFmt: "Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
#FileFmt: "%-7p %3l %8o %8s %-12.12m %.48f"
#
# SNPP-specific parameters.
#
#MaxMsgLength: 128 # max pager message length
#PagerIDMapFile: "/etc/pagermap" # file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time. Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap: "63 127 127 127 127 127 127 127 127 127 127 127"
#RetryTimeMap: "30 60 60 180 0 0 0 0 0 0 0 0"
#KillTimeMap: " 5 5 5 15 60 240 720 1440 1440 1440 1440 1440"
[root@sambatest hylafax]#
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
