[hylafax-users] AW: T.30 T2 timeout, expected page not received - please help!

["Reza Kordi" <rkordi@evernet.ch>]

Hi everybody,

 

I got a problem receiving faxes, T.30 T2 timeout, googled all possible messages and couldn’t see how to solve this problem or where it’s coming from!

 

Any hints are appreciated.

 

HylaFAX v4.1.3 under Linux SuSe 8.1; ASUS V2.080-V90_2M_DLS

 

Jan 21 18:57:57.34: [  998]: SESSION BEGIN 00000047 41417830581

Jan 21 18:57:57.34: [  998]: HylaFAX (tm) Version 4.1.3

Jan 21 18:57:57.34: [  998]: <-- [4:ATA\r]

Jan 21 18:58:03.45: [  998]: --> [7:CONNECT]

Jan 21 18:58:03.45: [  998]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'

Jan 21 18:58:03.45: [  998]: MODEM input buffering enabled

Jan 21 18:58:03.45: [  998]: RECV FAX: begin

Jan 21 18:58:03.45: [  998]: RECV FAX: CDPN

Jan 21 18:58:03.45: [  998]: MODEM input buffering disabled

Jan 21 18:58:03.45: [  998]: <-- data [23]

Jan 21 18:58:03.45: [  998]: <-- data [2]

Jan 21 18:58:05.14: [  998]: --> [7:CONNECT]

Jan 21 18:58:05.14: [  998]: <-- data [10]

Jan 21 18:58:05.14: [  998]: <-- data [2]

Jan 21 18:58:05.67: [  998]: --> [2:OK]

Jan 21 18:58:05.67: [  998]: <-- [9:AT+FRH=3\r]

Jan 21 18:58:06.18: [  998]: --> [7:CONNECT]

Jan 21 18:58:07.65: [  998]: --> [2:OK]

Jan 21 18:58:07.65: [  998]: REMOTE TSI "R2K"

Jan 21 18:58:07.65: [  998]: <-- [9:AT+FRH=3\r]

Jan 21 18:58:07.68: [  998]: --> [7:CONNECT]

Jan 21 18:58:08.08: [  998]: --> [2:OK]

Jan 21 18:58:08.08: [  998]: REMOTE wants 14400 bit/s

Jan 21 18:58:08.08: [  998]: REMOTE wants page width 1728 pixels in 215 mm

Jan 21 18:58:08.08: [  998]: REMOTE wants unlimited page length

Jan 21 18:58:08.08: [  998]: REMOTE wants 7.7 line/mm

Jan 21 18:58:08.08: [  998]: REMOTE wants 2-D MR

Jan 21 18:58:08.08: [  998]: RECV training at v.17 14400 bit/s

Jan 21 18:58:08.08: [  998]: <-- [11:AT+FRM=145\r]

Jan 21 18:58:09.92: [  998]: --> [7:CONNECT]

Jan 21 18:58:12.80: [  998]: MODEM TIMEOUT: receiving TCF

Jan 21 18:58:12.80: [  998]: <-- data [1]

Jan 21 18:58:12.82: [  998]: --> [10:NO CARRIER]

Jan 21 18:58:12.82: [  998]: MODEM No carrier

Jan 21 18:58:12.82: [  998]: RECV: TCF 2763 bytes, 2% non-zero, 2700 zero-run

Jan 21 18:58:42.82: [  998]: MODEM TIMEOUT: reading line from modem

Jan 21 18:58:42.82: [  998]: MODEM <Empty line>

Jan 21 18:58:42.82: [  998]: DELAY 75 ms

Jan 21 18:58:42.90: [  998]: TRAINING succeeded

Jan 21 18:58:42.90: [  998]: <-- [9:AT+FTH=3\r]

Jan 21 18:58:42.97: [  998]: --> [7:CONNECT]

Jan 21 18:58:42.97: [  998]: <-- data [3]

Jan 21 18:58:42.97: [  998]: <-- data [2]

Jan 21 18:58:44.28: [  998]: --> [2:OK]

Jan 21 18:58:44.39: [  998]: MODEM input buffering enabled

Jan 21 18:58:44.39: [  998]: <-- [11:AT+FRM=146\r]

Jan 21 18:58:51.39: [  998]: MODEM TIMEOUT: reading line from modem

Jan 21 18:58:51.39: [  998]: MODEM input buffering disabled

Jan 21 18:58:51.39: [  998]: <-- data [1]

Jan 21 18:58:51.41: [  998]: --> [2:OK]

Jan 21 18:58:51.41: [  998]: RECV FAX (00000047): recvq/fax00027.tif from R2K, r

oute to <unspecified>, 0 pages in 0:48

Jan 21 18:58:51.41: [  998]: RECV FAX: T.30 T2 timeout, expected page not receiv

ed

Jan 21 18:58:51.41: [  998]: <-- [9:AT+FTH=3\r]

Jan 21 18:58:51.48: [  998]: --> [7:CONNECT]

Jan 21 18:58:51.48: [  998]: <-- data [3]

Jan 21 18:58:51.48: [  998]: <-- data [2]

Jan 21 18:58:52.79: [  998]: --> [2:OK]

Jan 21 18:58:52.79: [  998]: MODEM input buffering enabled

Jan 21 18:58:52.79: [  998]: RECV FAX (00000047): session with R2K terminated ab

normally: T.30 T2 timeout, expected page not received

Jan 21 18:58:52.79: [  998]: RECV FAX: bin/faxrcvd "recvq/fax00027.tif" "modem"

"00000047" "T.30 T2 timeout, expected page not received" "" "" ""

Jan 21 18:58:52.88: [  998]: RECV FAX: end

Jan 21 18:58:52.88: [  998]: SESSION END

 

Mit freundlichen Grüssen
Best Regards
Meilleures Salutations
med vennlig hilsen
 
Reza Kordi