Re: [hylafax-users] Missing TSI on receiver's side and fax-number in faxstat

[Pedro Rocadas <procadas@yahoo.com>]

--- Nico Decker <ndecker-hylafax@dezidata.de> wrote:
> 
> > This is how I configured my config.ttyXX files
> >
> > FAXNumber:              +<country
> code>.11.111.1111
> 
> Correct.
> 
> >
> > and
> >
> > TagLineFormat:          "De %%l|%%n|%%s|%c|Pág %%P
> de
> > %%T"
> 
> The TagLineFormat is only for RECEIVING fax; it will
> be printed
> on top of every incoming fax.

You're wrong. Read man hylafax-config.

> So its value isn't
> important for
> my problem (i think).

Read above.

> 
> >
> > I'm not sure if this is important but my GettyArgs
> > are:
> >
> > GettyArgs:              "-h %l dx_%s"
> 
> These were the default arguments of an older
> hylafax-version.

Hylafax 4.1.1. Not so old.

LocalIdentifier I use it for our company name but you
can use it for your fax number.

> I tried them
> too with no success.
> My last attempt was to put a link in
> /var/spool/hylafax/etc/getty-link -> 
> /sbin/mgetty
> and to leave the preconfigured GettyArgs untouched
> ("-r -b %l"). Also
> no success.
> 
> 
> 
> >
> > --- Nico Decker <ndecker-hylafax@dezidata.de>
> wrote:
> > > Hi,
> > >
> > > i configured hylafax in Debian Linux. The daemon
> > > tools from DJB
> > > are supervising faxgetty (just like in inittab).
> > > Sending and receiving
> > > operate quite well, as far as the tif-files are
> > > concerned. My problem
> > > is now, that on the receivers side no tagline
> will
> > > be printed on top, if the
> > > sender is my hylafax application.
> > >
> > > I tested it with 3 modems; always the same
> problem.
> > > There is no hint
> > > in the logfiles ...
> > >
> > > Then I realized, that in faxstat there is no
> > > fax-number displayed:
> > > Modem ... (): ....
> > > although FAXNumber: +11111111 and
> LocalIdentifier:
> > > "..." ist defined
> > > in config.---
> > >
> > > Perhaps faxgetty doesn't know its TSI and
> number?!
> > > That would be strange,
> > > because sniffing on the serial line shows, that
> the
> > > number has been
> > > transferred!
> > > In addition, faxgetty reads the LocalIdentifier
> in
> > > the config-file, BUT NOT
> > > the FAXNumber-variable! This can be seen in the
> log
> > > file ...
> > >
> > > I'm working on that for more than 3 days now and
> > > don't know what to do
> > > anymore.
> > >
> > > Any suggestions?
> > >
> > > Thx,
> > > Nico Decker.
> > >
> > >
> > > ____________________ HylaFAX(tm) Users Mailing
> List
> > > _______________________
> > >   To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > >  On UNIX: mail -s unsubscribe
> > > hylafax-users-request@hylafax.org < /dev/null
> > >   *To learn about commercial HylaFAX(tm)
> support,
> > > mail sales@hylafax.org.*
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
> >
> > ____________________ HylaFAX(tm) Users Mailing
> List _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe
> hylafax-users-request@hylafax.org < /dev/null
> >   *To learn about commercial HylaFAX(tm) support,
> mail sales@hylafax.org.*
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support,
> mail sales@hylafax.org.*
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*