[hylafax-users] Hylafax Problem with USRobotics 56k Sportster

[Fernando <fernando@officer.com.br>]

Hi there,

I need a help. I have Hylafax 4.1.5 version, Red Hat 8 and an USRobotics
56k modem. Almost all the time(9 in 10) I got this below. I've been
trying everything I could image with string's, other phone line and
changes in minicom(I don't know this could help but I changed the hangup
string to 'ATH0').
So, I've attached my confg.modem file but I dont know it will help
because I've tried others configurations with no success!

Thks in advance.

-----------------------------------------------------------------
An attempt to receive facsimile on ttyS0 failed because:

     T.30 T2 timeout, expected page not received

     ---- Transcript of session follows ----

 Jan 03 10:55:02.00: [  755]: SESSION BEGIN 00001931 551150142001
 Jan 03 10:55:02.00: [  755]: HylaFAX (tm) Version 4.1.5
 Jan 03 10:55:07.28: [  755]: ANSWER: FAX CONNECTION  DEVICE /dev/ttyS0'
 Jan 03 10:55:45.75: [  755]: RECV FAX (00001931): recvq/fax01921.tif
from
02433420876, route to <unspecified>, 0 pages in 0:38
 Jan 03 10:55:46.96: [  755]: RECV FAX (00001931): session with
02433420876
terminated abnormally: T.30 T2 timeout, expected page not received
 Jan 03 10:55:46.96: [  755]: RECV FAX: bin/faxrcvd "recvq/fax01921.tif"
"ttyS0" "00001931" "T.30 T2 timeout, expected page not received" "" ""
-------------------------------------------------------------------------
----


# $Id: usr-xon,v 1.4 2001/02/05 06:38:34 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control. 
#
#
CountryCode:		55
AreaCode:		11
FAXNumber:		+551150142001
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
#ServerTracing:		1
#SessionTracing:		11
RecvFileMode:		0666
LogFileMode:		0666
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"Officer Distribuidora"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
LocalIdentifier:	BTW
PercentGoodLines:	20
MaxConsecutiveBadLines:	1000
MaxRecvPages:		200
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use class 1 interface
ModemRate:		19600		# max rate for DCE-DTE communication
ModemFlowControl:	xonxoff		# hardware flow control
#
ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
ModemResultCodesCmd:	ATQ0X4		# enable result codes
#
ModemMfrQueryCmd:	!USR
ModemModelQueryCmd:	ATI3
ModemRevQueryCmd:	ATI7		# XXX returns a multi-line result
ModemOnHookCmd:		ATH0		# place phone on hook (hangup)
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd:		AT&H0&I0&R1	# setup modem for no flow control
Class1HFLOCmd:		AT&H1&I0&R2	# setup modem for hardware flow control
Class1SFLOCmd:		""		# modem does this automatically
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
# ModemSetupAACmd:	AT+FCLASS=0	# leave modem idling in class 0
ModemAnswerCmd:		AT+FCLASS=1A	# answer in Class 1
#
# Disables the reporting of bad frames by the modem.  This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd:    AT+FNR=1,1,1,0



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*