|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Receive error (RSPREC error/got DCN) Help Needed!!
Additional Info:
I can send out fine! Without any
problems!!
My Modem Setup file: (The modem supports and is
setup for Distinctive Ringing - last line)
CountryCode: 44
AreaCode: 01323
FAXNumber: +441323729828
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0666
RingsBeforeAnswer: 2
SpeakerVolume: on
GettyArgs: "-h
%l
dx_%s"
LocalIdentifier: "01323729828"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From
%%l|%c|Page %%P of
%%T"
MaxRecvPages: 100
RingFax: "RING1"
PercentGoodLines: 0
#
#
#
Modem-related stuff: should reflect modem command interface
# and hardware
connection/cabling (e.g. flow
control).
#
ModemType: Class1 # use this to supply a
hint
ModemRate: 19200 # rate for DCE-DTE
communication
ModemFlowControl: rtscts #
default
#
ModemNoFlowCmd: AT&K0 # setup no flow
control
ModemHardFlowCmd: AT&K3 # setup hardware flow
control
ModemSoftFlowCmd: AT&K4 # setup software flow
control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop
resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD
reflects carrier (or
not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 #
product information
#
ModemDialCmd: ATDT%s # T for
tone dialing
ModemResetCmds: AT-SDR=1
