|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] multiple send of a fax
Hi,
server: SunOS name 5.8 Generic_112953-02 sun4u sparc SUNW,Sun-Fire
fax: server (HylaFAX (tm) Version 4.1.5) ready.
problem: one fax was send twice why ?
info: see logfile as attachment
thanks for your great work !!!!
mfg
aotto
--
----------------------------------------------------------
Andreas Otto - TTWOS support
Nov 29 13:15:45.19: [ 8291]: SESSION BEGIN 00001080 9999999999
Nov 29 13:15:45.19: [ 8291]: HylaFAX (tm) Version 4.1.5
Nov 29 13:15:45.19: [ 8291]: SEND FAX: JOB 2879 DEST 0,09999999999 COMMID 00001080 DEVICE '/dev/cua/a001'
Nov 29 13:15:45.19: [ 8291]: MODEM set DTR OFF
Nov 29 13:15:45.19: [ 8291]: DELAY 75 ms
Nov 29 13:15:45.27: [ 8291]: MODEM set DTR ON
Nov 29 13:15:45.27: [ 8291]: DELAY 2600 ms
Nov 29 13:15:47.88: [ 8291]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Nov 29 13:15:47.88: [ 8291]: DELAY 10 ms
Nov 29 13:15:47.90: [ 8291]: MODEM flush i/o
Nov 29 13:15:47.90: [ 8291]: <-- [4:ATZ\r]
Nov 29 13:15:48.50: [ 8291]: --> [2:OK]
Nov 29 13:15:48.50: [ 8291]: DELAY 3000 ms
Nov 29 13:15:51.51: [ 8291]: <-- [5:ATX3\r]
Nov 29 13:15:51.52: [ 8291]: --> [4:ATX3]
Nov 29 13:15:51.52: [ 8291]: --> [2:OK]
Nov 29 13:15:51.52: [ 8291]: <-- [5:ATE0\r]
Nov 29 13:15:51.55: [ 8291]: --> [4:ATE0]
Nov 29 13:15:51.55: [ 8291]: --> [2:OK]
Nov 29 13:15:51.55: [ 8291]: <-- [5:ATV1\r]
Nov 29 13:15:51.58: [ 8291]: --> [2:OK]
Nov 29 13:15:51.58: [ 8291]: <-- [5:ATQ0\r]
Nov 29 13:15:51.61: [ 8291]: --> [2:OK]
Nov 29 13:15:51.61: [ 8291]: <-- [7:ATS0=0\r]
Nov 29 13:15:51.64: [ 8291]: --> [2:OK]
Nov 29 13:15:51.64: [ 8291]: <-- [7:ATS8=2\r]
Nov 29 13:15:51.67: [ 8291]: --> [2:OK]
Nov 29 13:15:51.67: [ 8291]: <-- [8:ATS7=60\r]
Nov 29 13:15:51.70: [ 8291]: --> [2:OK]
Nov 29 13:15:51.70: [ 8291]: <-- [12:AT+FCLASS=1\r]
Nov 29 13:15:51.73: [ 8291]: --> [2:OK]
Nov 29 13:15:51.73: [ 8291]: <-- [5:ATM0\r]
Nov 29 13:15:51.76: [ 8291]: --> [2:OK]
Nov 29 13:15:51.76: [ 8291]: MODEM input buffering enabled
Nov 29 13:15:51.77: [ 8291]: <-- [12:AT+FCLASS=1\r]
Nov 29 13:15:51.90: [ 8291]: --> [2:OK]
Nov 29 13:15:51.90: [ 8291]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Nov 29 13:15:51.90: [ 8291]: DIAL 0,09999999999
Nov 29 13:15:51.90: [ 8291]: <-- [18:ATDT0,09999999999\r]
Nov 29 13:16:18.22: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:18.22: [ 8291]: MODEM input buffering disabled
Nov 29 13:16:19.84: [ 8291]: --> [2:OK]
Nov 29 13:16:19.84: [ 8291]: REMOTE NSF "00 00 45 C5 4E 4B 44 20 44 9A 73 73 65 6C 64 6F 72 66 20 20 89 00 00 00 00 00 4A 3C BE 01 BE"
Nov 29 13:16:19.84: [ 8291]: NSF remote fax equipment: Muratec
Nov 29 13:16:19.84: [ 8291]: NSF remote station ID: "sseldorf "
Nov 29 13:16:19.84: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:16:19.89: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:20.52: [ 8291]: --> [2:OK]
Nov 29 13:16:20.52: [ 8291]: REMOTE CSI "+4909999999999"
Nov 29 13:16:20.52: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:16:20.56: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:20.81: [ 8291]: --> [2:OK]
Nov 29 13:16:20.81: [ 8291]: REMOTE best rate 9600 bit/s
Nov 29 13:16:20.81: [ 8291]: REMOTE max page width 1728 pixels in 215 mm
Nov 29 13:16:20.81: [ 8291]: REMOTE max unlimited page length
Nov 29 13:16:20.81: [ 8291]: REMOTE best vres 7.7 line/mm
Nov 29 13:16:20.81: [ 8291]: REMOTE best format 2-D MR
Nov 29 13:16:20.81: [ 8291]: REMOTE supports T.30 Annex A, ECM
Nov 29 13:16:20.81: [ 8291]: REMOTE best 20 ms, 10 ms/scanline
Nov 29 13:16:20.81: [ 8291]: USE 9600 bit/s
Nov 29 13:16:20.81: [ 8291]: USE 20 ms, 10 ms/scanline
Nov 29 13:16:20.81: [ 8291]: SEND file "docq/doc2801.ps;00"
Nov 29 13:16:20.81: [ 8291]: USE page width 1728 pixels in 215 mm
Nov 29 13:16:20.81: [ 8291]: USE unlimited page length
Nov 29 13:16:20.81: [ 8291]: USE 3.85 line/mm
Nov 29 13:16:20.81: [ 8291]: USE 1-D MR
Nov 29 13:16:20.81: [ 8291]: SEND training at v.29 9600 bit/s
Nov 29 13:16:20.81: [ 8291]: <-- [9:AT+FTH=3\r]
Nov 29 13:16:20.86: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:20.86: [ 8291]: <-- data [23]
Nov 29 13:16:20.86: [ 8291]: <-- data [2]
Nov 29 13:16:22.04: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:22.04: [ 8291]: <-- data [6]
Nov 29 13:16:22.04: [ 8291]: <-- data [2]
Nov 29 13:16:23.11: [ 8291]: --> [2:OK]
Nov 29 13:16:23.11: [ 8291]: <-- [9:AT+FTS=7\r]
Nov 29 13:16:23.15: [ 8291]: --> [2:OK]
Nov 29 13:16:23.15: [ 8291]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Nov 29 13:16:23.15: [ 8291]: <-- [10:AT+FTM=96\r]
Nov 29 13:16:23.19: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:23.19: [ 8291]: <-- data [1024]
Nov 29 13:16:23.19: [ 8291]: <-- data [776]
Nov 29 13:16:23.19: [ 8291]: <-- data [2]
Nov 29 13:16:25.24: [ 8291]: --> [2:OK]
Nov 29 13:16:25.24: [ 8291]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Nov 29 13:16:25.24: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:16:25.60: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:26.37: [ 8291]: --> [2:OK]
Nov 29 13:16:26.37: [ 8291]: TRAINING succeeded
Nov 29 13:16:26.37: [ 8291]: DELAY 75 ms
Nov 29 13:16:26.45: [ 8291]: <-- [10:AT+FTM=96\r]
Nov 29 13:16:26.47: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:26.47: [ 8291]: SEND begin page
Nov 29 13:16:26.47: [ 8291]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Nov 29 13:16:26.47: [ 8291]: <-- data [1026]
Nov 29 13:16:26.47: [ 8291]: <-- data [1024]
Nov 29 13:16:26.47: [ 8291]: <-- data [1029]
Nov 29 13:16:26.47: [ 8291]: <-- data [1028]
Nov 29 13:16:26.47: [ 8291]: <-- data [1028]
Nov 29 13:16:26.47: [ 8291]: <-- data [1025]
Nov 29 13:16:26.47: [ 8291]: <-- data [1025]
Nov 29 13:16:26.47: [ 8291]: <-- data [1024]
Nov 29 13:16:28.90: [ 8291]: <-- data [1024]
Nov 29 13:16:28.90: [ 8291]: <-- data [1024]
Nov 29 13:16:28.90: [ 8291]: <-- data [1024]
Nov 29 13:16:28.90: [ 8291]: <-- data [1024]
Nov 29 13:16:31.57: [ 8291]: <-- data [1025]
Nov 29 13:16:31.57: [ 8291]: <-- data [1025]
Nov 29 13:16:31.57: [ 8291]: <-- data [1025]
Nov 29 13:16:34.08: [ 8291]: <-- data [1025]
Nov 29 13:16:34.08: [ 8291]: <-- data [1025]
Nov 29 13:16:34.08: [ 8291]: <-- data [1024]
Nov 29 13:16:36.78: [ 8291]: <-- data [1027]
Nov 29 13:16:36.78: [ 8291]: <-- data [1026]
Nov 29 13:16:36.78: [ 8291]: <-- data [1024]
Nov 29 13:16:39.22: [ 8291]: <-- data [1024]
Nov 29 13:16:39.22: [ 8291]: <-- data [1024]
Nov 29 13:16:39.22: [ 8291]: <-- data [1024]
Nov 29 13:16:41.92: [ 8291]: <-- data [1024]
Nov 29 13:16:41.92: [ 8291]: <-- data [1024]
Nov 29 13:16:41.92: [ 8291]: <-- data [873]
Nov 29 13:16:44.39: [ 8291]: SENT 27497 bytes of data
Nov 29 13:16:44.39: [ 8291]: <-- data [1024]
Nov 29 13:16:44.39: [ 8291]: <-- data [1024]
Nov 29 13:16:44.39: [ 8291]: <-- data [1025]
Nov 29 13:16:46.90: [ 8291]: <-- data [1024]
Nov 29 13:16:46.90: [ 8291]: <-- data [1024]
Nov 29 13:16:46.90: [ 8291]: <-- data [726]
Nov 29 13:16:46.90: [ 8291]: SENT 5846 bytes of data
Nov 29 13:16:46.90: [ 8291]: SEND 1D RTC
Nov 29 13:16:46.90: [ 8291]: <-- data [29]
Nov 29 13:16:49.56: [ 8291]: <-- data [2]
Nov 29 13:16:49.56: [ 8291]: SEND end page
Nov 29 13:16:54.83: [ 8291]: --> [2:OK]
Nov 29 13:16:54.83: [ 8291]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Nov 29 13:16:54.83: [ 8291]: <-- [9:AT+FTS=9\r]
Nov 29 13:16:54.94: [ 8291]: --> [2:OK]
Nov 29 13:16:54.94: [ 8291]: SEND send EOP (no more pages or documents)
Nov 29 13:16:54.94: [ 8291]: <-- [9:AT+FTH=3\r]
Nov 29 13:16:54.98: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:54.98: [ 8291]: <-- data [3]
Nov 29 13:16:54.98: [ 8291]: <-- data [2]
Nov 29 13:16:56.81: [ 8291]: --> [2:OK]
Nov 29 13:16:56.81: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:16:57.17: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:57.64: [ 8291]: --> [2:OK]
Nov 29 13:16:57.64: [ 8291]: SEND recv RTN (retrain negative)
Nov 29 13:16:57.64: [ 8291]: SEND training at v.29 7200 bit/s
Nov 29 13:16:57.64: [ 8291]: <-- [9:AT+FTH=3\r]
Nov 29 13:16:57.68: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:57.68: [ 8291]: <-- data [23]
Nov 29 13:16:57.68: [ 8291]: <-- data [2]
Nov 29 13:16:58.86: [ 8291]: --> [7:CONNECT]
Nov 29 13:16:58.86: [ 8291]: <-- data [6]
Nov 29 13:16:58.86: [ 8291]: <-- data [2]
Nov 29 13:16:59.94: [ 8291]: --> [2:OK]
Nov 29 13:16:59.94: [ 8291]: <-- [9:AT+FTS=7\r]
Nov 29 13:16:59.97: [ 8291]: --> [2:OK]
Nov 29 13:16:59.97: [ 8291]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Nov 29 13:16:59.97: [ 8291]: <-- [10:AT+FTM=72\r]
Nov 29 13:17:00.01: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:00.01: [ 8291]: <-- data [1024]
Nov 29 13:17:00.01: [ 8291]: <-- data [326]
Nov 29 13:17:00.01: [ 8291]: <-- data [2]
Nov 29 13:17:02.05: [ 8291]: --> [2:OK]
Nov 29 13:17:02.05: [ 8291]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Nov 29 13:17:02.05: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:17:02.43: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:03.18: [ 8291]: --> [2:OK]
Nov 29 13:17:03.18: [ 8291]: TRAINING succeeded
Nov 29 13:17:03.18: [ 8291]: DELAY 75 ms
Nov 29 13:17:03.26: [ 8291]: <-- [10:AT+FTM=72\r]
Nov 29 13:17:03.28: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:03.28: [ 8291]: SEND begin page
Nov 29 13:17:03.28: [ 8291]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Nov 29 13:17:03.28: [ 8291]: <-- data [1026]
Nov 29 13:17:03.28: [ 8291]: <-- data [1024]
Nov 29 13:17:03.28: [ 8291]: <-- data [1030]
Nov 29 13:17:03.28: [ 8291]: <-- data [1029]
Nov 29 13:17:03.28: [ 8291]: <-- data [1027]
Nov 29 13:17:03.28: [ 8291]: <-- data [1025]
Nov 29 13:17:03.28: [ 8291]: <-- data [1024]
Nov 29 13:17:03.28: [ 8291]: <-- data [1024]
Nov 29 13:17:06.30: [ 8291]: <-- data [1024]
Nov 29 13:17:06.30: [ 8291]: <-- data [1024]
Nov 29 13:17:06.30: [ 8291]: <-- data [1024]
Nov 29 13:17:06.30: [ 8291]: <-- data [1026]
Nov 29 13:17:09.85: [ 8291]: <-- data [1025]
Nov 29 13:17:09.85: [ 8291]: <-- data [1026]
Nov 29 13:17:09.85: [ 8291]: <-- data [1024]
Nov 29 13:17:13.20: [ 8291]: <-- data [1025]
Nov 29 13:17:13.20: [ 8291]: <-- data [1027]
Nov 29 13:17:13.20: [ 8291]: <-- data [1025]
Nov 29 13:17:16.84: [ 8291]: <-- data [1024]
Nov 29 13:17:16.84: [ 8291]: <-- data [1024]
Nov 29 13:17:16.84: [ 8291]: <-- data [131]
Nov 29 13:17:20.14: [ 8291]: SENT 20611 bytes of data
Nov 29 13:17:20.14: [ 8291]: <-- data [1024]
Nov 29 13:17:20.14: [ 8291]: <-- data [1024]
Nov 29 13:17:20.14: [ 8291]: <-- data [1024]
Nov 29 13:17:23.51: [ 8291]: <-- data [1025]
Nov 29 13:17:23.51: [ 8291]: <-- data [1024]
Nov 29 13:17:26.91: [ 8291]: <-- data [1024]
Nov 29 13:17:26.91: [ 8291]: <-- data [959]
Nov 29 13:17:26.91: [ 8291]: SENT 7103 bytes of data
Nov 29 13:17:26.91: [ 8291]: SEND 1D RTC
Nov 29 13:17:26.91: [ 8291]: <-- data [29]
Nov 29 13:17:26.91: [ 8291]: <-- data [2]
Nov 29 13:17:26.91: [ 8291]: SEND end page
Nov 29 13:17:34.65: [ 8291]: --> [2:OK]
Nov 29 13:17:34.65: [ 8291]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Nov 29 13:17:34.65: [ 8291]: <-- [9:AT+FTS=9\r]
Nov 29 13:17:34.76: [ 8291]: --> [2:OK]
Nov 29 13:17:34.76: [ 8291]: SEND send EOP (no more pages or documents)
Nov 29 13:17:34.76: [ 8291]: <-- [9:AT+FTH=3\r]
Nov 29 13:17:34.79: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:34.79: [ 8291]: <-- data [3]
Nov 29 13:17:34.79: [ 8291]: <-- data [2]
Nov 29 13:17:36.63: [ 8291]: --> [2:OK]
Nov 29 13:17:36.63: [ 8291]: <-- [9:AT+FRH=3\r]
Nov 29 13:17:37.00: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:37.48: [ 8291]: --> [2:OK]
Nov 29 13:17:37.48: [ 8291]: SEND recv MCF (message confirmation)
Nov 29 13:17:37.48: [ 8291]: SEND FAX (00001080): FROM root@ttwos-hs TO 0,09999999999 (page 1 of 1 sent in 1:17)
Nov 29 13:17:37.48: [ 8291]: SEND FAX (00001080): FROM root@ttwos-hs TO 0,09999999999 (docq/doc2801.ps;00 sent in 1:17)
Nov 29 13:17:37.51: [ 8291]: <-- [9:AT+FTH=3\r]
Nov 29 13:17:37.55: [ 8291]: --> [7:CONNECT]
Nov 29 13:17:37.55: [ 8291]: <-- data [3]
Nov 29 13:17:37.55: [ 8291]: <-- data [2]
Nov 29 13:17:39.03: [ 8291]: --> [2:OK]
Nov 29 13:17:39.03: [ 8291]: MODEM input buffering enabled
Nov 29 13:17:39.03: [ 8291]: <-- [5:ATH0\r]
Nov 29 13:17:40.37: [ 8291]: --> [2:OK]
Nov 29 13:17:40.37: [ 8291]: MODEM set DTR OFF
Nov 29 13:17:40.37: [ 8291]: SESSION END
