Re: [hylafax-users] modem is timing out

[Lee Howard <faxguy@howardsilvan.com>]

On 2002.11.06 07:17 Chad Meyer wrote:
> Hey,
> 
> I have been having a problem receiving faxes. About
> half the time I get error in the following log files.
> I can send fine. The modem also hangs in the recieve
> state and doesn't reset. (linux kernel 2.4.17, Hylafax
> 4.1.3, USR 56K Faxmodem)
> 
> Any hints?
....
> Nov 06 09:45:47.63: [  142]: <-- [9:AT+FRS=7\r]
> Nov 06 09:45:47.74: [  142]: --> [2:OK]
> Nov 06 09:45:47.74: [  142]: <-- [9:AT+FTH=3\r]
> Nov 06 09:46:17.74: [  142]: MODEM TIMEOUT: reading
> line from modem
> Nov 06 09:46:17.74: [  142]: MODEM <Timeout>
> Nov 06 09:46:17.74: [  142]: RECV send MCF (message
> confirmation)
> Nov 06 09:46:17.74: [  142]: RECV FAX (00000294): from
> <UNSPECIFIED>, page 7 in 0:53, INF, 3.85 line/mm, 2-D
> MR, 14400 bit/s
> Nov 06 09:46:17.74: [  142]: <-- HDLC<3:FF C8 31>
> Nov 06 09:46:17.74: [  142]: <-- data [3]
> Nov 06 09:46:17.74: [  142]: <-- data [2]
> Nov 06 09:46:20.29: [  142]: --> [5:ÿ?]
> Nov 06 09:46:53.21: [  142]: CLOSE /dev/ttyS0

I've seen one other instance of this - which also occurred with a USR 
56K modem.  I have a patch which I'd like to test which should prevent 
the modem from hanging in the receive state.  As for the problem with 
the timeout... I don't know.  It could be one of the myriad of USR bugs 
out there, but oddly the other person who has reported this stated that 
it didn't occur when using 4.1.2.

So, maybe you could report on 4.1.2 having this problem?  Maybe you'd 
like to try my patch?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*